Forging and powder metal parts manufacturers

Forging shops heat steel, aluminum, titanium or nickel alloy billets and shape them under hammers and presses, while powder metal plants press metal powders into parts and sinter them in furnaces. Hydraulic oil, quench tanks, furnace gas and combustible dust meet heavy machinery making safety-critical parts.

Manufacturing · NAICS 332111 · SIC 3462 · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Hydraulic oil sprayed onto hot dies and billets, starting fast-spreading press and pit fires

  2. 02

    Crushing, burns, hearing loss and struck-by injuries around hammers, presses and manipulators

  3. 03

    Hidden defects in crankshafts, landing gear, gears and fittings that fail in service

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Vehicle electrification cuts demand for engine and transmission forgings while adding parts for motors, chassis and battery structures, changing product mix and customer concentration.
  • Additive manufacturing and metal injection molding bring finer, more reactive powders into plants, raising dust explosion and fire risk beyond traditional pressed parts.
  • Servo presses, robots and induction heating are replacing manual hammer work, cutting burns and crush injuries but making production more dependent on software and controls.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

High
Large hydraulic presses leak oil onto hot work, quench tanks and sintering atmospheres can ignite, and fine metal powder explodes.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Presses on mineral hydraulic oil with pits and basements below
  • Oil-based die lubricants pooled on floors and in trenches
  • Titanium, aluminum or magnesium fines in dust collectors
Controls that matter
  • Fire-resistant hydraulic fluid and sprinklers or foam in press pits
  • Purge interlocks and flame curtains on sintering and atmosphere furnaces
  • Wet or explosion-vented dust collection, with metal fines cleaned up daily

Business interruption

High
Big hammers and presses take many months to replace, dies are unique, and customer part approvals stay with this plant.

How long and how costly a shutdown is.

Watch for
  • One large press or hammer producing most of the revenue
  • Aerospace or vehicle parts needing lengthy requalification elsewhere
  • Dies with no spare set or digital model
Controls that matter
  • Spare hydraulic pumps, motors, columns and die blocks on hand
  • Digital die models stored off site for quick re-sinking
  • Agreements with other forges for overflow or emergency work

Premises liability

Moderate
Few visitors come on site, but heavy hammers shake nearby buildings and the noise draws complaints from neighbors.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Homes or offices built close to hammer shops
  • Customers' inspectors walking the forge floor
Controls that matter
  • Vibration isolation under hammer foundations
  • Escorted visits with hearing and eye protection

Products and completed work

High
Forgings and sintered parts carry loads in engines, brakes, steering, aircraft and lifting gear; a lap, crack or porosity fails catastrophically.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Aircraft, medical or lifting parts in the product mix
  • Customer specifications requiring ultrasonic or magnetic testing of every piece
  • Contracts accepting recall, field campaign or line-stoppage costs
Controls that matter
  • Heat lot traceability from billet to shipped part
  • Nondestructive testing and destructive sampling matched to part criticality
  • Contract review capping consequential damages and requiring customer validation

Workers’ injury

High
Workers feed hot billets to hammers and presses, facing burns, crushing, flying scale, extreme noise, heat stress and heavy lifting.

Injuries and illness to employees.

Watch for
  • Manual tong handling of hot stock at hammers
  • Die changes without blocking or lockout
  • Powder handling without dust control or respirators
Controls that matter
  • Manipulators and robots for loading and transfer of hot stock
  • Hearing conservation with audiometric testing and enclosed operator cabs
  • Lockout and die blocks required for every die change

Commercial auto

Moderate
Parts usually ship by carrier; some shops run trucks to heat treaters, machinists and nearby customers.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Own trucks hauling heavy bins of forgings on tight delivery windows
Controls that matter
  • Driver record checks and load securing for dense steel loads

Crime and theft

Moderate
Titanium, nickel alloy and copper bar and their scrap turnings sell well; carbon steel parts have little resale value.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Titanium or nickel alloy scrap stored in an open yard
Controls that matter
  • Locked scrap bins with weights recorded and reconciled to purchases

Inland marine and equipment

Elevated
Customers' dies and tooling stay in the plant for years, and parts travel out for heat treating, machining and testing.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • No register or agreed values for customer-owned dies
  • Work in progress held at outside processors for weeks
Controls that matter
  • Die list showing each owner, agreed value and rack position
  • Signed terms on who bears loss of dies and parts away from the plant

Environmental

Elevated
Graphite die lubricants, hydraulic and quench oils, pickling acids and injection molding binders contaminate soil and drains if unmanaged.

Pollution on or from the site or the work.

Watch for
  • Oil-soaked floors and trenches draining to the ground
  • Old pickling tanks or solvent degreasers on site
Controls that matter
  • Lined trenches and oil separators on all floor drains
  • Diked storage and licensed disposal for spent oils and acids

Cyber and data

Elevated
Networked presses and induction heaters drive production, and defense and aerospace work brings controlled drawings that customers expect protected.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Customer drawings shared by email or unsecured file transfer
  • Press controls reachable remotely by equipment makers
Controls that matter
  • Segmented production network and controlled vendor access
  • Access controls and logging on customer technical data

Professional liability

Moderate
Many shops help customers convert machined or cast parts to forged or powder metal designs, and a weak redesign leads to claims.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Design or material changes proposed by the shop's engineers
Controls that matter
  • Customer approval in writing for every design change

Umbrella and excess

High
One defective forging in an aircraft, vehicle steering system or lifting hook can cause deaths and claims across a whole production run.

How likely one liability event is to exhaust primary limits.

Watch for
  • Aerospace, rail or lifting gear customers
  • Long production runs shipped before test results return
Controls that matter
  • Shipments held until test results are approved
  • Batch segregation that limits recalls to known heat lots
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Older steel-frame forge halls with heavy crane runways, deep hammer foundations, press pits and basements holding hydraulic power units, often with later additions for heat treating and machining.
Occupancy
Gas and induction heating of billets, oil-based die lubricants, high-pressure hydraulics beside red-hot work, oil quench tanks, sintering furnaces with flammable atmospheres and fine metal powders.
Protection
Sprinklers throughout with foam or deluge in press pits, fire-resistant hydraulic fluids, furnace purge interlocks, explosion-vented dust collectors and automatic shut-off of hydraulic pumps.
Exposure
Usually in older industrial districts beside machine shops and heat treaters; hammer vibration and noise reach neighbors, and housing has often grown up close to the plant.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: forge floor

On site: fire and explosion

On site: quality and people

Refer or decline if you find

  • Presses on mineral oil above unprotected pits or basements
  • Metal powder or fines accumulated on beams and ledges
  • Sintering furnaces with bypassed purge or flame safety interlocks
  • Safety-critical parts shipped without traceability to heat lot
  • Manual tong work at heavy hammers with no guarding
05 / Location

How UrbanStat data helps.

Press pits and hydraulic basements sit below grade, so even shallow flooding reaches the costliest machinery first. Tall forge halls with crane runways take damage from tornadoes, wind and earthquakes.

FloodTornadoEarthquakeWind
  • Flood scores at the address show whether press pits and hydraulic basements, where the costliest machinery sits, lie in water's path.
  • Parcel and permit data give the age of older forge halls and recent electrical, furnace and sprinkler permits, a quick check on upgrades since the last survey.
  • Street-by-street exposure views show insured value concentrated where forges, heat treaters and machine shops cluster in one industrial district, with alerts when a threshold is passed.
Flood · Tornado · Earthquake · Wind
06 / Public loss data

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

5.4 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Iron and steel forging
5.4
All private industry
2.3

1.7 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Iron and steel forging (NAICS 332111). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

5 fatal work injuries in 2024, most often from falls, slips and trips (3).

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Forging and Stamping (NAICS 33211), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

96 citations from 30 inspections; 61% were classed serious, willful or repeat.

  • 1910.212 General requirements for all machines
    8
  • 1910.1200 Hazard communication
    8
  • 1910.134 Respiratory protection
    6
  • 1910.1053 Respirable crystalline silica
    6
  • 1910.147 The control of hazardous energy (lockout/tagout)
    5

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Iron and Steel Forging (NAICS 332111). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

84 facilities reported toxic chemical releases totaling 348,188 pounds on and off site.

  • Nickel
    130,974
  • Chromium
    72,465
  • Manganese
    62,310

Chemicals released in the largest amounts, in pounds. 70 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Iron and Steel Forging (NAICS 332111). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Product recall
Forged and sintered parts go into vehicles and machines in large runs; one defect can recall them all.
Aircraft products liability
Parts sold into aircraft are usually excluded from general liability and need specific products cover.
Equipment breakdown
Press hydraulics, crankshafts, clutches and induction power supplies fail without fire and take months to rebuild.
Customers' tooling in care
Customer-owned dies held for years can be worth more than the plant's own machinery.
Classification
SystemCodeIndustry
NAICS 2022, primary332111Iron and Steel Forging
NAICS 2022332112Nonferrous Forging
NAICS 2022332117Powder Metallurgy Part Manufacturing
SIC 1987, primary3462Iron and Steel Forgings
SIC 19873463Nonferrous Forgings
SIC 19873499Fabricated Metal Products, NEC
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →