---
title: "Forging and powder metal parts manufacturers: Industry Risk Guide"
description: "Forging shops heat steel, aluminum, titanium or nickel alloy billets and shape them under hammers and presses, while powder metal plants press metal…"
url: https://www.urbanstat.com/industry-risk-guides/forging-and-powder-metal-parts-manufacturers/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Forging and powder metal parts manufacturers

Forging shops heat steel, aluminum, titanium or nickel alloy billets and shape them under hammers and presses, while powder metal plants press metal powders into parts and sinter them in furnaces. Hydraulic oil, quench tanks, furnace gas and combustible dust meet heavy machinery making safety-critical parts.

Manufacturing · NAICS 332111 · SIC 3462 · Updated November 2026

Risk profile

1. [Property High](#line-property)
2. [Business interruption High](#line-bi)
3. [Premises liability Moderate](#line-gl)
4. [Products and completed work High](#line-products)
5. [Workers’ injury High](#line-wc)
6. [Commercial auto Moderate](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental Elevated](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Moderate](#line-prof)
12. [Umbrella and excess High](#line-umbrella)

**Property.** Large hydraulic presses leak oil onto hot work, quench tanks and sintering atmospheres can ignite, and fine metal powder explodes.

Loss drivers

## Where losses come from.

1. Hydraulic oil sprayed onto hot dies and billets, starting fast-spreading press and pit fires
2. Crushing, burns, hearing loss and struck-by injuries around hammers, presses and manipulators
3. Hidden defects in crankshafts, landing gear, gears and fittings that fail in service

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Forging and powder metal parts manufacturers
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: High, 4 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Vehicle electrification cuts demand for engine and transmission forgings while adding parts for motors, chassis and battery structures, changing product mix and customer concentration.
- Additive manufacturing and metal injection molding bring finer, more reactive powders into plants, raising dust explosion and fire risk beyond traditional pressed parts.
- Servo presses, robots and induction heating are replacing manual hammer work, cutting burns and crush injuries but making production more dependent on software and controls.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: High (4 of 5)

Large hydraulic presses leak oil onto hot work, quench tanks and sintering atmospheres can ignite, and fine metal powder explodes.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Presses on mineral hydraulic oil with pits and basements below
- Oil-based die lubricants pooled on floors and in trenches
- Titanium, aluminum or magnesium fines in dust collectors

**Controls that matter**

- Fire-resistant hydraulic fluid and sprinklers or foam in press pits
- Purge interlocks and flame curtains on sintering and atmosphere furnaces
- Wet or explosion-vented dust collection, with metal fines cleaned up daily

### Business interruption: High (4 of 5)

Big hammers and presses take many months to replace, dies are unique, and customer part approvals stay with this plant.

Covers: How long and how costly a shutdown is.

**Watch for**

- One large press or hammer producing most of the revenue
- Aerospace or vehicle parts needing lengthy requalification elsewhere
- Dies with no spare set or digital model

**Controls that matter**

- Spare hydraulic pumps, motors, columns and die blocks on hand
- Digital die models stored off site for quick re-sinking
- Agreements with other forges for overflow or emergency work

### Premises liability: Moderate (2 of 5)

Few visitors come on site, but heavy hammers shake nearby buildings and the noise draws complaints from neighbors.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Homes or offices built close to hammer shops
- Customers' inspectors walking the forge floor

**Controls that matter**

- Vibration isolation under hammer foundations
- Escorted visits with hearing and eye protection

### Products and completed work: High (4 of 5)

Forgings and sintered parts carry loads in engines, brakes, steering, aircraft and lifting gear; a lap, crack or porosity fails catastrophically.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Aircraft, medical or lifting parts in the product mix
- Customer specifications requiring ultrasonic or magnetic testing of every piece
- Contracts accepting recall, field campaign or line-stoppage costs

**Controls that matter**

- Heat lot traceability from billet to shipped part
- Nondestructive testing and destructive sampling matched to part criticality
- Contract review capping consequential damages and requiring customer validation

### Workers’ injury: High (4 of 5)

Workers feed hot billets to hammers and presses, facing burns, crushing, flying scale, extreme noise, heat stress and heavy lifting.

Covers: Injuries and illness to employees.

**Watch for**

- Manual tong handling of hot stock at hammers
- Die changes without blocking or lockout
- Powder handling without dust control or respirators

**Controls that matter**

- Manipulators and robots for loading and transfer of hot stock
- Hearing conservation with audiometric testing and enclosed operator cabs
- Lockout and die blocks required for every die change

### Commercial auto: Moderate (2 of 5)

Parts usually ship by carrier; some shops run trucks to heat treaters, machinists and nearby customers.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Own trucks hauling heavy bins of forgings on tight delivery windows

**Controls that matter**

- Driver record checks and load securing for dense steel loads

### Crime and theft: Moderate (2 of 5)

Titanium, nickel alloy and copper bar and their scrap turnings sell well; carbon steel parts have little resale value.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Titanium or nickel alloy scrap stored in an open yard

**Controls that matter**

- Locked scrap bins with weights recorded and reconciled to purchases

### Inland marine and equipment: Elevated (3 of 5)

Customers' dies and tooling stay in the plant for years, and parts travel out for heat treating, machining and testing.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- No register or agreed values for customer-owned dies
- Work in progress held at outside processors for weeks

**Controls that matter**

- Die list showing each owner, agreed value and rack position
- Signed terms on who bears loss of dies and parts away from the plant

### Environmental: Elevated (3 of 5)

Graphite die lubricants, hydraulic and quench oils, pickling acids and injection molding binders contaminate soil and drains if unmanaged.

Covers: Pollution on or from the site or the work.

**Watch for**

- Oil-soaked floors and trenches draining to the ground
- Old pickling tanks or solvent degreasers on site

**Controls that matter**

- Lined trenches and oil separators on all floor drains
- Diked storage and licensed disposal for spent oils and acids

### Cyber and data: Elevated (3 of 5)

Networked presses and induction heaters drive production, and defense and aerospace work brings controlled drawings that customers expect protected.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Customer drawings shared by email or unsecured file transfer
- Press controls reachable remotely by equipment makers

**Controls that matter**

- Segmented production network and controlled vendor access
- Access controls and logging on customer technical data

### Professional liability: Moderate (2 of 5)

Many shops help customers convert machined or cast parts to forged or powder metal designs, and a weak redesign leads to claims.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Design or material changes proposed by the shop's engineers

**Controls that matter**

- Customer approval in writing for every design change

### Umbrella and excess: High (4 of 5)

One defective forging in an aircraft, vehicle steering system or lifting hook can cause deaths and claims across a whole production run.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Aerospace, rail or lifting gear customers
- Long production runs shipped before test results return

**Controls that matter**

- Shipments held until test results are approved
- Batch segregation that limits recalls to known heat lots

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Older steel-frame forge halls with heavy crane runways, deep hammer foundations, press pits and basements holding hydraulic power units, often with later additions for heat treating and machining.
- **Occupancy**: Gas and induction heating of billets, oil-based die lubricants, high-pressure hydraulics beside red-hot work, oil quench tanks, sintering furnaces with flammable atmospheres and fine metal powders.
- **Protection**: Sprinklers throughout with foam or deluge in press pits, fire-resistant hydraulic fluids, furnace purge interlocks, explosion-vented dust collectors and automatic shut-off of hydraulic pumps.
- **Exposure**: Usually in older industrial districts beside machine shops and heat treaters; hammer vibration and noise reach neighbors, and housing has often grown up close to the plant.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What share of output is open-die, closed-die, cold forged or powder metal, and in which alloys?
- Which industries buy the parts, and which parts are safety-critical or go into aircraft?
- What hydraulic fluid do the main presses use, and how large are the reservoirs?
- Do customer contracts pass on recall, warranty or line-stoppage costs?
- What fires, press failures or serious injuries have occurred recently, and what changed afterward?

### Documents to request

- Loss runs for the current and prior policy terms
- Sprinkler, furnace safety and dust collector inspection reports
- Quality certifications and customer approval letters
- Sample customer contracts showing warranty and recall terms

### On site: forge floor

- Which hammers and presses are in use, how old are they, and who maintains them?
- How are hot billets moved between furnace, hammer and trim press?
- What die lubricant is used, and where does the excess collect?
- How are die changes done, and are blocks and lockout used?

### On site: fire and explosion

- Where are the hydraulic power units, and what happens automatically if a hose bursts?
- How are quench tanks protected, covered and kept from overheating?
- How are sintering furnaces purged and started, and who is trained to do it?
- Where is metal powder stored and mixed, and how is dust collected?

### On site: quality and people

- How are parts traced to heat lot, and what testing is done before shipment?
- What noise levels are measured, and how are hearing tests tracked?
- Who owns the dies on the racks, and is there a register?

### Refer or decline if you find

- Presses on mineral oil above unprotected pits or basements
- Metal powder or fines accumulated on beams and ledges
- Sintering furnaces with bypassed purge or flame safety interlocks
- Safety-critical parts shipped without traceability to heat lot
- Manual tong work at heavy hammers with no guarding

Location

## How UrbanStat data helps.

Press pits and hydraulic basements sit below grade, so even shallow flooding reaches the costliest machinery first. Tall forge halls with crane runways take damage from tornadoes, wind and earthquakes.

Flood · Tornado · Earthquake · Wind

- Flood scores at the address show whether press pits and hydraulic basements, where the costliest machinery sits, lie in water's path.
- Parcel and permit data give the age of older forge halls and recent electrical, furnace and sprinkler permits, a quick check on upgrades since the last survey.
- Street-by-street exposure views show insured value concentrated where forges, heat treaters and machine shops cluster in one industrial district, with alerts when a threshold is passed.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Tornado · Earthquake · Wind

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**5.4** recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Iron and steel forging

**5.4**

All private industry

**2.3**

1.7 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Iron and steel forging (NAICS 332111). Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**5** fatal work injuries in 2024, most often from falls, slips and trips (3).

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Forging and Stamping (NAICS 33211), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**96** citations from 30 inspections; 61% were classed serious, willful or repeat.

- 1910.212 General requirements for all machines **8**
- 1910.1200 Hazard communication **8**
- 1910.134 Respiratory protection **6**
- 1910.1053 Respirable crystalline silica **6**
- 1910.147 The control of hazardous energy (lockout/tagout) **5**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Iron and Steel Forging (NAICS 332111). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**84** facilities reported toxic chemical releases totaling **348,188 pounds** on and off site.

- Nickel **130,974**
- Chromium **72,465**
- Manganese **62,310**

Chemicals released in the largest amounts, in pounds. 70 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Iron and Steel Forging (NAICS 332111). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Product recall**: Forged and sintered parts go into vehicles and machines in large runs; one defect can recall them all.
- **Aircraft products liability**: Parts sold into aircraft are usually excluded from general liability and need specific products cover.
- **Equipment breakdown**: Press hydraulics, crankshafts, clutches and induction power supplies fail without fire and take months to rebuild.
- **Customers' tooling in care**: Customer-owned dies held for years can be worth more than the plant's own machinery.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [332111](https://www.urbanstat.com/industry-risk-guides/naics/?q=332111) | Iron and Steel Forging |
| NAICS 2022 | [332112](https://www.urbanstat.com/industry-risk-guides/naics/?q=332112) | Nonferrous Forging |
| NAICS 2022 | [332117](https://www.urbanstat.com/industry-risk-guides/naics/?q=332117) | Powder Metallurgy Part Manufacturing |
| SIC 1987, primary | [3462](https://www.urbanstat.com/industry-risk-guides/sic/?q=3462) | Iron and Steel Forgings |
| SIC 1987 | [3463](https://www.urbanstat.com/industry-risk-guides/sic/?q=3463) | Nonferrous Forgings |
| SIC 1987 | [3499](https://www.urbanstat.com/industry-risk-guides/sic/?q=3499) | Fabricated Metal Products, NEC |

**Related business types**

- [Foundries](https://www.urbanstat.com/industry-risk-guides/foundries/)
- [Commercial heat treaters](https://www.urbanstat.com/industry-risk-guides/commercial-heat-treaters/)
- [Metal stamping and fabricating shops](https://www.urbanstat.com/industry-risk-guides/metal-stamping-and-fabricating-shops/)
- [Gear, bearing and power transmission manufacturers](https://www.urbanstat.com/industry-risk-guides/gear-bearing-and-power-transmission-manufacturers/)
- [Motor vehicle parts manufacturers](https://www.urbanstat.com/industry-risk-guides/motor-vehicle-parts-manufacturers/)
- [Compare Forging and powder metal parts manufacturers with Foundries](https://www.urbanstat.com/industry-risk-guides/compare/?a=forging-and-powder-metal-parts-manufacturers&b=foundries)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/forging-and-powder-metal-parts-manufacturers/

- Page: Forging and powder metal parts manufacturers: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/forging-and-powder-metal-parts-manufacturers/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
