Motor vehicle parts manufacturers
Motor vehicle parts makers machine, cast, stamp, mold, wire and assemble engine, powertrain, brake, steering, electrical, seating and trim components for vehicle builders and the aftermarket. Parts are safety critical and delivered to the hour, so a defect, a fire or a late truck can stop an assembly line and start a recall.
Where losses come from.
- 01
Defective brake, steering, airbag or electrical parts that injure drivers and trigger recalls across many models
- 02
Fires in machining, die casting, foam molding and paint areas fed by oil, foam and packaging
- 03
Missed deliveries that stop a customer's assembly line and bring back-charges under supply contracts
- PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Severe, 5 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: Severe, 5 of 5; sector average 3.6; all business types 3.6.
- Electric vehicles replace engines and fuel systems with battery packs, motors and power electronics, bringing lithium-ion fire risk and high-voltage testing into parts plants.
- Driver assistance cameras, radar and software make more parts safety critical, and recalls increasingly turn on code and sensors rather than metal.
- Large single-piece aluminum castings and leaner supply chains concentrate value in fewer machines and sites, raising business interruption and contingent exposures.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
HighOil-flooded machining, aluminum die casting, polyurethane foam seating and paint lines sit beside racked plastic parts and cardboard packaging.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Magnesium or aluminum fines collected without dust controls or daily cleanup
- Foam pouring or stored foam cushions in areas sprinklered for ordinary hazard
- Die casting machines on mineral hydraulic oil beside molten metal
- Sprinklers designed for racked plastics and foam, with in-rack heads where needed
- Fire-resistant hydraulic fluid on die casting machines and large presses
- Wet-type collectors and scheduled cleaning for light metal dust
Business interruption
HighTransfer lines, die casting cells and customer tooling take months to replace, and automakers resource the part while the plant is down.
How long and how costly a shutdown is.
- One plant as the sole approved source for a high-volume program
- A single paint line, furnace or press feeding every product
- Chips, resin or castings bought from one supplier or one region
- Duplicate tooling or a qualified backup line at a sister plant
- Critical spares and service contracts for bottleneck machines
- A tested recovery plan agreed with key customers
Premises liability
ModerateVisitors are mostly truck drivers and customer auditors, but sorting and containment crews work inside customers' plants when quality problems arise.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Containment, sorting or rework crews placed at customer plants
- Truck drivers loading at docks without wheel chocks or trailer restraints
- Contracts and certificates for any third-party sorting firms used
- Dock restraints and a driver waiting area away from forklifts
Products and completed work
SevereBrake, steering, airbag, fuel and electrical faults cause crashes and fires, and one bad lot spreads across many vehicles and model years.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Brakes, steering, airbags, seat belts, fuel and battery systems among the parts made
- Supply agreements with uncapped indemnity and recall cost sharing
- Aftermarket parts sold online under the maker's own brand
- Lot traceability from raw material to shipped part, with serialized safety parts
- Error-proofing and end-of-line testing on every safety feature
- Contract review that caps recall sharing and fixes the limits owed
Workers’ injury
HighPresses, die casting, robots and forklifts bring crush, burn and amputation risk, and fast line assembly brings steady strain claims.
Injuries and illness to employees.
- Presses and robotic cells with bypassed light curtains or interlocks
- Molten aluminum ladled or poured by hand at die casting cells
- Repetitive harness, seat and trim assembly at high line rates, often by temporary staff
- Lockout enforced for die changes and jam clearing
- Job rotation and ergonomic review of each assembly station
- Pedestrian walkways separated from forklift and tugger routes
Commercial auto
ModerateMost parts move by contract carrier; the insured may run shuttle trucks to nearby plants and expedite rush shipments.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Owned trucks shuttling parts between plants on tight schedules
- Staff driving rush parts to customers in personal cars
- Driver record checks and hours limits for shuttle drivers
- Hired and non-owned auto cover for expedited runs
Crime and theft
ModerateCopper wire, electronic modules and the precious metals in coated catalytic converter substrates attract theft and inside skimming.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Precious-metal catalyst stock or scrap stored without vault-style control
- Scrap sales handled by one employee without reconciliation
- Weighed and reconciled scrap sales with competitive bids
- Caged storage and access logs for high-value components
Inland marine and equipment
ElevatedCustomer-owned dies, molds and fixtures sit in the plant for the life of a program and travel out for repair.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Customer tooling of high value with no schedule or care terms
- Tooling held at outside toolmakers or finishers
- Tooling register with owner, value and location of each tool
- Written terms on who insures customer tooling in care and in transit
Environmental
ElevatedCutting fluids, degreasers, paint, plating baths and die casting release agents are used daily, and older sites carry solvent legacies.
Pollution on or from the site or the work.
- Chlorinated solvent degreasing in use now or in the past
- Brake or clutch friction production with an asbestos history
- Aqueous parts washers in place of solvent degreasing
- Diked chemical storage and licensed waste disposal with manifests
Cyber and data
ElevatedSupplier portals, EDI schedules and robotic cells run on the network, so ransomware stops shipments and soon the customer's line.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Plant floor controllers on the same network as office systems
- Remote access for machine builders left open between visits
- Segmented plant network with offline backups of controller programs
- Multifactor authentication on remote access and supplier portals
Professional liability
ModerateDesign-responsible suppliers specify and validate parts for automakers, but most resulting claims are brought as products or contract disputes.
Loss or injury caused by advice, design, testing, care or another professional service.
- Engineering or testing services sold separately from parts
- Design reviews and validation records kept for each released part
Umbrella and excess
SevereA defect in a safety part can cause fatal crashes across many vehicles, with class actions and customer indemnity demands on top.
How likely one liability event is to exhaust primary limits.
- Airbag, brake, steering or battery parts in high-volume vehicle programs
- Sales into trucks and buses, where one failure injures many
- Limits matched to the indemnity each supply contract demands
- Field-failure monitoring with fast escalation to engineering and customers
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Large single-story steel or concrete plants, often expanded in stages, with metal deck roofs, some foam-core panels or rooftop solar, and mezzanines over assembly lines.
- Occupancy
- Oil-flooded machining, die casting with molten aluminum, foam pouring, paint and powder lines, and racked plastic parts and packaging awaiting shipment.
- Protection
- Sprinklers designed for the plastics and foam storage, protected hydraulic systems, special suppression in paint booths and dust collectors, and monitored alarms with a trained response team.
- Exposure
- Usually in industrial parks near customers' plants and highways; neighbors' storage yards, trailer drops and pallets stacked outside the walls add fire and theft exposure.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: production
On site: fire and machinery
On site: people and logistics
On site: records
Refer or decline if you find
- Error-proofing or end-of-line tests routinely bypassed to keep up with schedule
- Safety parts shipped without lot traceability to raw material
- Supply contracts with uncapped recall and line stoppage indemnity
- Foam or racked plastics stored above sprinkler design height
- Magnesium or aluminum fines building up around machines and collectors
How UrbanStat data helps.
Parts plants cluster near assembly plants in inland industrial corridors where tornadoes, hail and river floods strike. Large roofs with rooftop units take hail and wind damage, and earthquakes at distant chip or resin suppliers stop production.
- Street-by-street exposure views show how much insured value sits around one assembly plant, where many parts suppliers cluster, with alerts when a set threshold is passed.
- Tornado, hail and flood scores at the plant address, not the postal code, inform roof, stock and interruption terms for large single-story parts plants.
- Parcel and permit data give the construction date and recent expansion or electrical permits, a quick check on whether sprinklers kept pace with new lines.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
3.0 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.
0.9 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Other motor vehicle parts manufacturing (NAICS 33639), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
5 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Other Motor Vehicle Parts Manufacturing (NAICS 33639), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
254 citations from 79 inspections; 65% were classed serious, willful or repeat.
- 1910.147 The control of hazardous energy (lockout/tagout)38
- 1910.1200 Hazard communication15
- 1910.134 Respiratory protection15
- 1910.157 Portable fire extinguishers9
- 1910.303 General (electrical)9
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Other Motor Vehicle Parts Manufacturing (NAICS 336390). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
210 facilities reported toxic chemical releases totaling 2 million pounds on and off site.
- Zinc compounds304,614
- Xylene225,504
- Certain glycol ethers192,255
Chemicals released in the largest amounts, in pounds. 103 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Other Motor Vehicle Parts Manufacturing (NAICS 336390). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Product recall
- Automakers pass recall and field campaign costs back to the supplier whose part caused the defect.
- Contingent business interruption
- A fire at a sole resin, chip or casting supplier stops this plant as surely as one of its own.
- Equipment breakdown
- Presses, die casting machines, robots and transformers fail mechanically and stop production without any fire.
- Customer tooling in care
- Molds, dies and fixtures belong to the customer, and losing them delays the program long after the building is repaired.
- Employment practices
- Large shift workforces, temporary staff and layoffs when programs end bring discrimination and wage claims.
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 336390 | Other Motor Vehicle Parts Manufacturing |
| NAICS 2022 | 336310 | Motor Vehicle Gasoline Engine and Engine Parts Manufacturing |
| NAICS 2022 | 336320 | Motor Vehicle Electrical and Electronic Equipment Manufacturing |
| NAICS 2022 | 336330 | Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing |
| NAICS 2022 | 336340 | Motor Vehicle Brake System Manufacturing |
| NAICS 2022 | 336360 | Motor Vehicle Seating and Interior Trim Manufacturing |
| NAICS 2022 | 336350 | Motor Vehicle Transmission and Power Train Parts Manufacturing |
| NAICS 2022 | 336370 | Motor Vehicle Metal Stamping |
| SIC 1987, primary | 3714 | Motor Vehicle Parts and Accessories |
| SIC 1987 | 3694 | Electrical Equipment for Internal Combustion Engines |
| SIC 1987 | 3592 | Carburetors, Pistons, Piston Rings, and Valves |
| SIC 1987 | 2396 | Automotive Trimmings, Apparel Findings, and Related Products |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.