Car and truck assembly plants
Assembly plants stamp and weld vehicle bodies, paint them and fit engines or battery packs, interiors and electronics on paced lines, with parts arriving from many suppliers just in time. Values under one roof are enormous, a stoppage idles the whole supply chain, and every vehicle carries crash and recall exposure for years.
Where losses come from.
- 01
Paint shop and battery fires, and tornado or hail damage to plants and finished vehicle lots
- 02
Shutdowns from a supplier fire, chip shortage or ransomware that idle the whole line
- 03
Vehicle defects that cause crashes, fires or injuries and force large recalls
- PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: Severe, 5 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Severe, 5 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Elevated, 3 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Elevated, 3 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: High, 4 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: Severe, 5 of 5; sector average 3.6; all business types 3.6.
- Electric vehicle lines add battery pack storage, high-voltage work and thermal runaway risk to plants built for engines and fuel.
- Software-defined vehicles take over-the-air updates, so a coding error or cyberattack can affect a whole fleet at once, and suits over driver-assistance features draw larger verdicts.
- Large single-piece aluminum castings are replacing welded body sections, bringing molten metal and giant die-casting presses into the plant as new fire and bottleneck risks.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
HighPaint shops with solvents, ovens and booths, plastics storage and charged battery packs sit inside some of the largest values under one roof.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Solvent-borne paint, sealer and purge solvent systems in the paint shop
- Damaged or recalled battery packs stored indoors without quarantine
- Finished vehicles parked in open lots exposed to hail
- Booth and oven suppression, solvent detection and duct cleaning on schedule
- Outdoor quarantine area with spacing and monitoring for damaged packs
- Hail netting or covered parking for finished vehicle storage
Business interruption
SevereThe paint shop is a single bottleneck, and just-in-time supply means one missing part or supplier fire stops the whole line.
How long and how costly a shutdown is.
- Sole-source suppliers for seats, chips, battery cells or wiring harnesses
- Only one paint shop or body shop for a vehicle program
- Supplier plants clustered in one area exposed to the same storm
- Supplier risk mapping with dual sourcing for critical parts
- Buffer stock for parts with long lead times
- Business continuity plans tested with key suppliers
Premises liability
ModeratePlant tours, dealer events, test tracks and many contractors on site bring visitors, but the public is kept away from the line.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Public test drives, ride-alongs or delivery centers at the plant
- Outside contractors working around robots and conveyors
- Contractor safety program with permits and certificates of insurance
- Escorted tours on marked walkways away from moving equipment
Products and completed work
SevereComplete vehicles carry people at speed, so defects in brakes, airbags, steering, batteries or driver-assistance software cause fatal crashes and fires.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Driver-assistance or automated driving features marketed beyond what they do
- New battery chemistries or cell suppliers with little field history
- Off-road, recreational or specialty vehicles with rollover exposure
- Field data monitoring that triggers early engineering investigation
- Traceability of safety-critical parts by vehicle identification number
- Documented validation of software updates before release
Workers’ injury
ElevatedAutomation handles heavy lifting, but paced lines cause repetitive strain, and robots, conveyors and presses cause crush and amputation injuries.
Injuries and illness to employees.
- Workers entering robot cells without lockout
- Overtime and line speed increases during model launches
- High-voltage battery work without trained and equipped staff
- Interlocked robot cell guarding and lockout audited each shift
- Job rotation and lift assists at high-strain stations
- Electrical safety training and insulated tools for battery work
Commercial auto
ElevatedTest, engineering and media loan vehicles run on public roads, staff drive company cars, and yard drivers move finished vehicles.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Prototype or automated vehicles tested on public roads
- Employee lease and loan car programs
- Trained, licensed test drivers with route plans and data logging
- Driving record checks for anyone driving company vehicles
Crime and theft
ElevatedFinished vehicles, catalytic converters, battery modules and electronics are stolen, and many suppliers invite invoice and payment fraud.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Keyless vehicles parked in lots with weak perimeter control
- Supplier bank detail changes accepted by email
- Fenced, lit and camera-covered lots with key control
- Call-back verification for any change to supplier payment details
Inland marine and equipment
ElevatedFinished vehicles move by truck, rail and ship and sit massed at ports and staging lots, often at the maker's risk until delivery.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Large numbers of vehicles parked at ports or rail yards
- Customer- or supplier-owned tooling held at the plant
- Transit cover with accumulation limits for ports and staging lots
- Tooling register stating ownership and replacement values
Environmental
ElevatedPaint shop emissions, pretreatment sludge, wastewater, bulk fuels and fluids for filling make a large, permitted and closely watched site.
Pollution on or from the site or the work.
- Older plants with solvent, oil or heavy-metal contamination in soil
- Bulk fuel, coolant and brake fluid tanks without secondary containment
- Diked bulk fluid storage with leak detection
- Wastewater pretreatment with monitored discharge and licensed sludge disposal
Cyber and data
HighHighly networked lines stop within hours of a ransomware attack, and connected vehicles send location and driver data back to the maker.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Production systems linked to suppliers' and dealers' networks
- Vehicle apps, telematics and over-the-air updates run in-house
- Segmented plant networks with tested offline recovery of line control
- Signed vehicle software and a security team that monitors threats
Professional liability
LowEngineering is built into the product; design errors fall under products liability rather than separate advice.
Loss or injury caused by advice, design, testing, care or another professional service.
- Engineering or contract assembly services sold to other brands
- Contracts allocating design responsibility for contract-built vehicles
Umbrella and excess
SevereA defect shared across many vehicles brings fatal crashes, class actions and very large verdicts far beyond primary limits.
How likely one liability event is to exhaust primary limits.
- Safety-critical parts shared across several models and model years
- Fleet, bus or armored vehicles carrying many occupants
- Early warning reporting and a recall committee with authority to act
- Design reviews focused on occupant protection and fire safety
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Very large single-story steel-frame buildings with metal deck roofs, often joined by conveyors and tunnels into one fire area, plus multi-level paint shops and outdoor vehicle lots.
- Occupancy
- Stamping, robotic welding, pretreatment and electrocoat, solvent or waterborne painting with curing ovens, plastics and parts storage, fluid filling, battery pack handling and end-of-line testing.
- Protection
- Full sprinklers with special protection in paint booths and ovens, fire walls between body, paint and assembly, a plant fire brigade, monitored detection and controlled gates.
- Exposure
- Supplier parks, rail yards and vehicle lots crowd around the plant, so one storm hits the plant, its suppliers and finished stock together.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: body and paint
On site: assembly and batteries
On site: storage and yards
On site: systems and records
Refer or decline if you find
- Damaged battery packs stored indoors with no quarantine or monitoring
- Paint shop with overdue duct cleaning or impaired booth suppression
- Critical parts from one supplier with no continuity plan
- Production network directly reachable from supplier or office networks
- Open engineering recommendations on sprinklers or fire walls
How UrbanStat data helps.
Huge metal roofs and open lots of finished vehicles make tornado and hail the main threats. Flooding of substations, pits and paint shop basements stops the line, and nearby suppliers share the same storm.
- Hail and tornado scores at the address show how exposed open lots of finished vehicles are, before stock limits and deductibles are set.
- Street-by-street exposure views show the plant, its supplier park and vehicle lots as one accumulation under a single storm, with alerts past a set threshold.
- Live hurricane and storm surge overlays show which ports and staging lots holding finished vehicles sit in a storm's path during an event.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
5.8 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.
1.5 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Automobile and light duty motor vehicle manufacturing (NAICS 33611), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
4 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Automobile and Light Duty Motor Vehicle Manufacturing (NAICS 33611), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
52 citations from 16 inspections; 73% were classed serious, willful or repeat.
- 1910.134 Respiratory protection6
- 1910.107 Spray finishing using flammable and combustible materials5
- 1910.178 Powered industrial trucks3
- 1910.252 General requirements (welding, cutting and brazing)3
- 1910.23 Ladders3
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Heavy Duty Truck Manufacturing (NAICS 336120). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
49 facilities reported toxic chemical releases totaling 12.2 million pounds on and off site.
- Certain glycol ethers2.8M
- N-butyl alcohol1.8M
- 1,2,4-trimethylbenzene1.6M
Chemicals released in the largest amounts, in pounds. 42 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Automobile and Light Duty Motor Vehicle Manufacturing (NAICS 336110). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Product recall
- Vehicle recalls cost notification, parts, dealer labor and logistics, and general liability excludes these costs.
- Contingent business interruption
- A fire or storm at a key supplier stops assembly as fully as damage at the plant itself.
- Equipment breakdown
- Presses, paint ovens, robots and electrical substations fail without fire and stop paced lines.
- Employment practices
- A large workforce with shift work, overtime and layoffs brings discrimination, harassment and wrongful dismissal claims.
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 336110 | Automobile and Light Duty Motor Vehicle Manufacturing |
| NAICS 2022 | 336120 | Heavy Duty Truck Manufacturing |
| NAICS 2022 | 336992 | Military Armored Vehicle, Tank, and Tank Component Manufacturing |
| NAICS 2022 | 336999 | All Other Transportation Equipment Manufacturing |
| SIC 1987, primary | 3711 | Motor Vehicles and Passenger Car Bodies |
| SIC 1987 | 3799 | Transportation Equipment, NEC |
| SIC 1987 | 3795 | Tanks and Tank Components |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.