Lithium-ion battery manufacturers and recyclers
Lithium-ion battery makers coat electrodes, assemble and charge cells, and build modules and packs; recyclers discharge, shred and refine spent batteries for their metals. Charged cells, flammable electrolyte and solvents share one building, so a single cell in thermal runaway can destroy the plant.
Where losses come from.
- 01
Thermal runaway in formation, aging or scrap storage that spreads cell to cell through the building
- 02
Fires and explosions when shredders or crushers puncture batteries that were not fully discharged
- 03
Cell defects that cause fires in vehicles, devices or energy storage systems after sale
- PropertyProperty: Severe, 5 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Elevated, 3 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Severe, 5 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: High, 4 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: Severe, 5 of 5; sector average 3.6; all business types 3.6.
- Lithium iron phosphate cells resist thermal runaway better than nickel-rich chemistries, lowering fire frequency, though the stored energy in each new plant keeps rising.
- Recycling volumes are climbing as early electric vehicle packs and consumer batteries reach end of life, putting more damaged, unpredictable batteries into shredders and yards.
- New plants ramp up fast with inexperienced staff and unproven lines, and start-up periods bring more scrap cells, small fires and quality escapes.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
SevereCharged cells can ignite without warning and spread through formation racks, scrap bins or shredder feed, beside flammable electrolyte and solvent.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Formation and aging rooms with dense racks of charging cells and no cutoff
- Reject cells or incoming spent batteries piled indoors in open bins
- Shredding lines fed with batteries not discharged or checked for damage
- Formation, aging and scrap areas fire-separated, sprinklered and fitted with gas detection
- Spent and reject batteries held outdoors or in rated containers, apart from buildings
- Shredding under inert gas or liquid, with discharge checks before feed
Business interruption
HighDry rooms, coating lines and formation equipment take many months to replace, and vehicle and device makers will not wait for requalification.
How long and how costly a shutdown is.
- A single dry room, coater or formation hall serving all output
- Supply contracts tied to vehicle launches with penalties for missed volumes
- Cathode materials, separators or electrolyte from one qualified supplier
- Fire walls splitting electrode, assembly, formation and warehouse areas
- Second qualified source for key materials and critical spares held on site
Premises liability
ElevatedFew visitors enter, but a battery fire sends toxic smoke over neighbors and can force evacuations, road closures and claims for lost trade.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Homes, schools or businesses close downwind of storage and recycling yards
- Public battery drop-off counters at a recycling site
- Emergency plan shared and rehearsed with the local fire service
- Air monitoring and neighbor notification arrangements ready before any incident
Products and completed work
SevereCells go by the thousand into vehicles, homes and devices; one contamination or design flaw can mean fires, injuries and a fleet-wide recall.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Packs built for e-bikes, scooters or tools sold without full abuse testing
- Cells sold loose to pack builders with no control of application
- Recovered or second-life cells resold for reuse without grading records
- In-line inspection for metal particles, misaligned electrodes and internal shorts
- Lot traceability from electrode batch to finished pack serial number
- Battery management design reviews and abuse testing for every pack model
Workers’ injury
ElevatedSolvent and metal powder exposure, high-voltage pack work and burns from cell fires are the main sources, in largely automated plants.
Injuries and illness to employees.
- Manual discharge, sorting or dismantling of damaged batteries at recyclers
- Open handling of nickel and cobalt powders or electrode solvent
- Staff told to fight cell fires rather than evacuate
- Closed powder and solvent handling with local exhaust and air sampling
- Insulated tools, arc-rated clothing and lockout for all pack and module work
- Gas monitoring for fluoride compounds and hydrogen near electrolyte and failed cells
Commercial auto
ModerateManufacturers ship through dangerous goods carriers, but many recyclers run their own trucks collecting used and damaged batteries.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Damaged or swollen batteries collected without fire-rated containers
- Drivers without dangerous goods training
- Approved packaging, state-of-charge limits and segregated loads on every collection run
- Driver files, telematics and dangerous goods training records
Crime and theft
ModerateCobalt and nickel materials, copper foil and black mass have scrap value, and finished cells resell easily on gray markets.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Rejected cells leaving site for scrap without destruction records
- Black mass and metal stock without weighed reconciliation
- Certified destruction of rejects and weighed reconciliation of high-value materials
- Camera coverage and controlled access at stores and loading docks
Inland marine and equipment
ElevatedCells and packs are regulated dangerous goods in transit; a damaged pallet can burn a trailer, container or customer's warehouse.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Cells shipped at high state of charge or in reused packaging
- Prototype or failed cells returned through ordinary couriers
- Certified packaging and charge limits on every outbound shipment
- Forwarders and carriers approved for lithium battery cargo
Environmental
HighElectrode solvent, nickel and cobalt dust, fluoride gases from electrolyte, acid leaching at recyclers and toxic firewater all reach air, soil and drains.
Pollution on or from the site or the work.
- Spent battery stockpiles on unpaved or undrained ground
- No firewater containment sized for a large battery fire
- Leaching or wastewater treatment discharging near operating permit limits
- Solvent recovery and dust collection with monitored emissions
- Paved, contained storage yards draining to treatment
- Firewater containment tanks or drain shut-offs tested on schedule
Cyber and data
ElevatedFormation chargers, dry-room controls and production execution systems are networked, and cell designs and process data are prized trade secrets.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Equipment vendors with standing remote access to production lines
- Plant controls on the same network as office systems
- Production networks segmented, with session-based vendor access
- Offline backups of recipes, quality records and traceability data
Professional liability
ModerateCustom pack design, application engineering and test reports that customers rely on can bring claims apart from a physical defect.
Loss or injury caused by advice, design, testing, care or another professional service.
- Engineering or testing services sold to other manufacturers
- Written scope and liability limits for design and testing work
Umbrella and excess
SevereA cell defect behind vehicle or home fires, or a plant fire that empties a neighborhood, can exhaust several layers of limits.
How likely one liability event is to exhaust primary limits.
- Cells supplied for vehicles, aircraft, medical devices or home storage
- Dense housing close to the plant or recycling yard
- Recall plan tested with customers, with traceability to each pack
- Contract indemnities and limits agreed with vehicle and device customers
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Large steel-framed plants with long-span roofs and insulated panel walls, dry rooms built from foam-cored panels, and older warehouses converted for pack assembly or recycling.
- Occupancy
- Graphite and cathode powder mixing, solvent-based electrode coating and drying ovens, electrolyte filling, racks of cells charging in formation, and at recyclers spent battery stockpiles feeding shredders and leaching tanks.
- Protection
- Fire separation between process areas, sprinklers and gas detection in formation and storage, thermal cameras over battery stockpiles and shredder feeds, explosion venting, and firewater containment for the whole site.
- Exposure
- New plants often sit in industrial parks near towns; outdoor battery yards, solvent tanks and substations add fire load, and smoke from a fire reaches homes and businesses downwind.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: process
On site: fire protection
On site: people and handling
On site: records and history
Refer or decline if you find
- Charged cells or scrap batteries stored in the main production hall
- Small cell fires treated as routine and not investigated
- Spent batteries shredded without confirmed discharge or inert atmosphere
- Formation area with no fire separation from warehouse or assembly
- Packs sold for e-bikes or scooters without abuse test records
How UrbanStat data helps.
Floodwater reaching charged cells or battery yards causes shorts and fires days later. Shaking topples racks of charging cells, roof damage lets rain into dry rooms, and grass fires can reach outdoor battery stockpiles.
- Flood scores at the address show whether formation halls and outdoor battery yards sit where water could short charged cells and start a delayed fire.
- Street-by-street exposure views show how much insured value sits around a battery plant, including neighboring warehouses on the book, with alerts when a set threshold is passed.
- Building-permit history flags older warehouses converted to pack assembly or battery recycling, a prompt to check whether fire protection was upgraded for the new use.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
2.7 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.
1.0 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Battery manufacturing (NAICS 33591), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
5 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Electrical Equipment, Appliance, and Component Manufacturing (NAICS 335), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
230 citations from 57 inspections; 66% were classed serious, willful or repeat.
- 1910.147 The control of hazardous energy (lockout/tagout)24
- 1910.28 Duty to have fall protection and falling object protection19
- 1910.1200 Hazard communication14
- 1910.178 Powered industrial trucks12
- 1910.22 General requirements (walking-working surfaces)9
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Materials Recovery Facilities (NAICS 562920). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
76 facilities reported toxic chemical releases totaling 8.1 million pounds on and off site.
- N-methyl-2-pyrrolidone1.9M
- Cobalt and cobalt compounds1.1M
- Nickel and nickel compounds985,106
Chemicals released in the largest amounts, in pounds. 38 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Battery Manufacturing (NAICS 335910). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Product recall
- Vehicle and device makers pass back the cost of replacing packs across a whole production run.
- Equipment breakdown
- Dry-room dehumidifiers, coaters and formation chargers fail without fire and stop output, sometimes scrapping cells in process.
- Contingent business interruption
- A fire at a sole supplier of cathode material, separator or electrolyte halts cell production for months.
- Builders risk
- Plants expand in phases, commissioning new lines beside running ones, and fires during start-up are common.
- Debris removal limits
- Clearing burned cells and contaminated wreckage as hazardous waste often costs far more than standard debris sublimits.
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 335910 | Battery Manufacturing |
| NAICS 2022 | 562920 | Materials Recovery Facilities |
| NAICS 2022 | 423930 | Recyclable Material Merchant Wholesalers |
| NAICS 2022 | 331492 | Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum) |
| SIC 1987, primary | 3691 | Storage Batteries |
| SIC 1987 | 4953 | Refuse Systems |
| SIC 1987 | 5093 | Scrap and Waste Materials |
| SIC 1987 | 3341 | Secondary Smelting and Refining of Nonferrous Metals |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.