Dry cell battery manufacturers
Dry cell makers press zinc, manganese dioxide and carbon powders into cans, add caustic or organic electrolyte, seal and age alkaline, zinc-carbon, lithium primary and button cells. Alkaline lines are fairly benign; lithium metal lines add a water-reactive metal, flammable or toxic electrolytes and cells that ignite in storage or use.
Where losses come from.
- 01
Fires from lithium metal, shorted cells and reject bins in assembly, aging and finished storage
- 02
Cells that overheat, leak or are swallowed after sale, leading to recalls
- 03
Worker exposure to metal powders, caustic electrolyte and solvents
- PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Low, 1 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
- Rechargeable packs displace alkaline cells in many devices, so primary plants lean on lithium coin and specialty cells with a higher fire load.
- Tighter rules on coin cell packaging and warnings follow child ingestion injuries, raising product liability exposure for any maker that falls short.
- Battery fires in waste trucks and recycling plants push makers to fund take-back schemes and design cells that fail more safely.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
HighLithium metal reacts violently with water, and shorted cells ignite and spread cell to cell through dense racks of finished stock.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Lithium metal foil or powder outside dry, protected storage
- Finished cells stored loose or in bulk where terminals can touch
- Scrap and rejected cells collected in open bins indoors
- Lithium handling cut off in dry rooms with Class D agent on hand
- Electrolyte storage and filling in ventilated, electrically classified rooms
- Reject cells taped and held outdoors in steel drums of dry sand
Business interruption
HighHigh-speed assembly lines are custom built and slow to replace, and smoke or moisture through dry rooms scraps lithium cell stock.
How long and how costly a shutdown is.
- One high-speed line or dry room serving a whole product family
- Battery-grade zinc, manganese dioxide or lithium foil from one supplier
- Private-label retail contracts with fill-rate penalties
- Fire separation between powder, assembly, lithium and warehouse areas
- Qualified alternative sources for active materials and separators
Premises liability
LowThe public does not enter; the off-site concern is smoke from a battery fire.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Homes or sensitive neighbors downwind of cell storage
- Emergency plan covering toxic smoke and firewater
Products and completed work
HighSwallowed lithium coin cells burn a child's throat within hours, and shorted or leaking cells injure users and damage devices.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Cells sold loose to pack builders with no application control
- Coin cells in packaging a child can open
- Metal particle contamination found in past production lots
- In-line detection of contamination, shorts and electrode misalignment
- Abuse and transport safety testing for each cell design
- Lot traceability down to the electrode batch for targeted recalls
Workers’ injury
ElevatedManganese and zinc dust, caustic potash electrolyte and, on lithium lines, toxic or flammable electrolytes make exposure control the main task.
Injuries and illness to employees.
- Powder mixing and transfer with visible dust
- Electrolyte filling without enclosure or acid-gas monitoring
- Closed powder handling with local exhaust and air sampling
- Emergency showers, burn treatment gel and trained responders near filling
Commercial auto
LowCells ship by specialist carriers under dangerous goods rules; staff driving is incidental.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Samples or prototype cells carried in employees' cars
- No cells moved by road outside approved packaging and carriers
Crime and theft
ModerateSilver for button cells and lithium foil have value, and branded finished cells resell easily in bulk.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Silver, lithium foil and branded finished cells held without stock control
- Weighed issue and reconciliation of high-value raw materials
Inland marine and equipment
ElevatedLithium cells are regulated dangerous goods; a damaged pallet can burn a trailer, container or warehouse.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Lithium metal cells shipped without dangerous goods packaging and marks
- Prototype or defective cells returned through ordinary couriers
- Certified dangerous goods packaging with every terminal protected from shorting
- Carriers and forwarders approved for dangerous goods
Environmental
ElevatedHeavy-metal powders, solvent recovery, caustic electrolyte and firewater from a battery fire are the pathways to soil and drains.
Pollution on or from the site or the work.
- Legacy mercury or cadmium cell production on the site
- No containment for firewater from cell storage areas
- Solvent recovery and dust collection with monitored emissions
- Firewater containment sized for the warehouse sprinkler discharge
Cyber and data
ElevatedHigh-speed assembly and test lines run on networked controls and lot data, so ransomware stops production and traceability together.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Line controls and cell testers reachable from the office network
- Equipment makers with standing remote access
- Segmented production network with monitored vendor access
- Offline backups of recipes, machine programs and traceability data
Professional liability
LowCells are sold as products; application advice to device makers is incidental and falls mainly under products.
Loss or injury caused by advice, design, testing, care or another professional service.
- Custom cell or pack design work sold to device makers
- Written design terms with the customer's approval of final specifications
Umbrella and excess
HighSwallowed coin cells, cells failing in medical or safety devices and toxic smoke from a plant fire can each produce severe claims.
How likely one liability event is to exhaust primary limits.
- Coin cells sold loose or in packs children can open
- Cells supplied for implants, defibrillators, smoke alarms or emergency beacons
- Child-resistant packaging and ingestion warnings on every coin cell pack
- Contracts capping liability and limiting cells to approved applications
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Large single-story steel plants with dry rooms and clean areas built inside, often of insulated panels, mezzanines for powder mixing and adjoining high-bay warehouses for finished cells.
- Occupancy
- Mixing of zinc, manganese dioxide and carbon powders, caustic and organic electrolyte filling, lithium metal handling, and dense racks of finished cells in aging and storage.
- Protection
- Cut-off aging and finished cell storage with sprinklers and heat detection, dry lithium rooms with Class D agents, ventilated electrolyte rooms and outdoor reject quarantine.
- Exposure
- Downwind homes and neighboring plants face toxic smoke in a fire, and firewater can reach drains and streams; warehouses of finished lithium cells set the size of the loss.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: chemistry and products
On site: fire protection
On site: process and continuity
On site: health and environment
Refer or decline if you find
- Finished lithium cells stored in bulk in the main production hall
- Reject cells accumulating in open indoor bins
- Lithium handling area with no fire separation from the warehouse
- Button cells sold in packaging without child resistance
- Unexplained small fires in recent history
How UrbanStat data helps.
Water reaching lithium cells or lithium metal causes short circuits and fires rather than putting them out. Flood, surge and roof loss in wind are therefore fire perils here, and earthquake topples racked cells.
- Flood and storm surge scores at the address show whether finished lithium cell storage could be inundated, a route to fire as well as water damage.
- Street-by-street exposure views show insured values in buildings beside a cell plant, with alerts when the accumulation around it passes a set threshold.
- Live event overlays during a hurricane show which battery plants and cell warehouses lie in the track and the surge zone.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
2.7 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.
1.0 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Battery manufacturing (NAICS 33591), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
5 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Electrical Equipment, Appliance, and Component Manufacturing (NAICS 335), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
239 citations from 73 inspections; 55% were classed serious, willful or repeat.
- 1910.1025 Lead25
- 1910.1200 Hazard communication24
- 1910.134 Respiratory protection22
- 1910.147 The control of hazardous energy (lockout/tagout)21
- 1910.212 General requirements for all machines20
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Other Electrical Equipment and Component Manufacturing (NAICS 3359), the closest published group. Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
76 facilities reported toxic chemical releases totaling 8.1 million pounds on and off site.
- N-methyl-2-pyrrolidone1.9M
- Cobalt and cobalt compounds1.1M
- Nickel and nickel compounds985,106
Chemicals released in the largest amounts, in pounds. 38 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Battery Manufacturing (NAICS 335910). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Product recall
- A contaminated electrode batch can force recall of the cells and of the devices built around them.
- Equipment breakdown
- High-speed assembly lines, dry-room dehumidifiers and cell testers fail without fire and stop output for weeks.
- Pollution legal liability
- Firewater, electrolyte spills and heavy-metal dust are excluded from general liability and costly to clean up.
- Contingent business interruption
- Battery-grade zinc, manganese dioxide and lithium foil often come from one supplier, and a fire there stops production.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.