Screw machine and precision turned parts shops

Screw machine shops turn bar stock into fittings, pins and bushings on cam-driven and computer-controlled automatic lathes, often unattended, and fastener makers cold-head and thread-roll wire into bolts, screws and rivets. Oil coats machines, floors and chips, and the parts disappear into brakes, aircraft, structures and medical devices made by others.

Manufacturing · NAICS 332721 · SIC 3451 · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Cutting-oil fires inside machine enclosures and mist collectors, often during unattended running

  2. 02

    Out-of-tolerance, mixed or wrong-grade parts that force customers to sort, rework or recall

  3. 03

    Soil and groundwater contamination from oils and degreasing solvents

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Low, 1 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Sliding-headstock CNC lathes with bar feeders and robots run lights-out for long stretches, so a machine fire can grow before anyone arrives.
  • Lead-free brass and tighter limits on leaded alloys change chip handling and tooling, and mixed alloy lots become a product risk.
  • Counterfeit and mis-graded fasteners in the market have buyers demanding lot traceability and test reports, raising the cost of missing records.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

High
Straight cutting oil under pressure, hot chips and oil mist ignite readily, and oil-saturated floors and machines carry the fire.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Lights-out running with no in-machine fire suppression
  • Titanium, magnesium or zirconium bar being turned
  • Oil-soaked timber floors in older mill buildings
Controls that matter
  • Automatic suppression in each enclosed machine using straight oil
  • Mist collectors and ducts cleaned and filters changed on schedule
  • Sprinklers throughout and chips removed from the building daily

Business interruption

Elevated
Shops run many similar machines, but multi-spindle automatics are slow to replace and customers schedule tightly.

How long and how costly a shutdown is.

Watch for
  • Older cam machines with no replacement available
  • One customer taking most of the output
Controls that matter
  • Programs, setup sheets and gauges backed up off site
  • Agreements with peer shops for emergency capacity

Premises liability

Low
A closed workshop with almost no visitors.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Carriers collecting from oily dock areas
Controls that matter
  • Clean, marked walkways at shipping and receiving

Products and completed work

High
Parts are made to others' drawings, yet a bad lot of turned parts or bolts in brakes, aircraft or structures brings costly claims.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Parts for vehicles, aircraft, medical implants or gas fittings
  • Wrong alloy or grade mixed into a job, or plated fasteners left brittle
  • Purchase orders imposing sorting, line-down and recall charges
Controls that matter
  • First-piece, in-process and final inspection records per lot
  • Bar stock certified and color-coded with lot traceability
  • Contract review to cap consequential damages

Workers’ injury

Elevated
Lacerations from chips and tooling, skin and breathing complaints from fluids, and strains from loading bar.

Injuries and illness to employees.

Watch for
  • Long bar stock whipping in open feed tubes
  • Operators clearing chips by hand from running machines
  • Cold headers and thread rollers run without hearing protection or guards
Controls that matter
  • Enclosed bar feeders and interlocked machine doors
  • Chip hooks, gloves suited to rotating work and eye protection
  • Fluid management with skin care and mist extraction

Commercial auto

Low
Parts ship by carrier or parcel; staff seldom drive for work.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Staff running parts to outside platers in personal cars
Controls that matter
  • Non-owned auto cover for occasional errands

Crime and theft

Moderate
Brass, copper and stainless bar and chips are worth stealing or skimming.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Brass chips sold for cash with no weight record
  • Bar stock racks beside an unsecured dock door
Controls that matter
  • Scrap weights reconciled to bar purchases
  • Alarm and cameras covering stock and scrap bins

Inland marine and equipment

Moderate
Parts travel to outside heat treaters and platers, and some customers supply their own material.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Whole lots held at outside processors
  • Customer-furnished bar or gauges with no agreed value
Controls that matter
  • Cover for goods in transit and at processors
  • Records of customer property received

Environmental

Elevated
Cutting oils, coolant and parts-cleaning solvents are used in volume, and many older sites carry solvent contamination.

Pollution on or from the site or the work.

Watch for
  • Current or past vapor degreasing with chlorinated solvents
  • Oil-saturated floors, pits and chip storage areas
  • Floor drains of unknown destination
Controls that matter
  • Aqueous or enclosed vacuum parts washers
  • Chip spinners with oil recovery and sealed chip storage
  • Baseline soil and groundwater testing on older sites

Cyber and data

Elevated
CNC lathe programs, lot inspection data and customers' drawings live on networked systems; an encrypted server halts production and certification.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Lathes and cold headers controlled from the office network with shared logins
  • Defense or aerospace drawings held without access controls
Controls that matter
  • Production network segmented, with offline backups of programs and lot records
  • Multi-factor login for file transfer and customer portals

Professional liability

Moderate
Most work is to print, but suggesting material, grade or design changes to cut cost puts the shop's judgment behind failures.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Engineering help converting machined parts to cold-headed designs
Controls that matter
  • Customer sign-off on every substitution or design change

Umbrella and excess

High
A failed brake fitting, aircraft fastener or structural bolt can cause deaths, and claims reach every unit built with the lot.

How likely one liability event is to exhaust primary limits.

Watch for
  • Aerospace, structural bolting or vehicle safety parts as a large share of sales
Controls that matter
  • Limits set by the most severe end use, with aircraft products cover checked
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Older multi-story mill buildings with timber floors in long-established shops, or single-story steel and masonry plants on slab for newer fastener and turning operations.
Occupancy
Rows of oil-cooled automatic lathes, cold headers and thread rollers, oily chips and drums of cutting oil, parts washers and often an oil-quench heat treat line.
Protection
Sprinklers throughout, in-machine suppression on oil-cooled machines run unattended, mist collection, daily chip removal, monitored alarms, and sealed floors where oil is used.
Exposure
Industrial parks and old mill complexes put the shop beside other metalworking tenants, and chip hoppers or oil drums against outside walls can feed a fire indoors.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: work and customers

On site: machines and fire protection

On site: people

On site: environment and records

Refer or decline if you find

  • Unattended oil-cooled machines with no fire suppression
  • Oil-soaked wood floors in an unsprinklered building
  • Chlorinated solvent degreaser history with no site testing
  • Reactive metal chips mixed with ordinary scrap
05 / Location

How UrbanStat data helps.

Flood water lifts oil from sumps, pits and chip bins and spreads it through the building and off site. Precision machines lose alignment in shaking, and older mill buildings have weak roofs.

FloodTornadoWindEarthquake
  • Flood scores at the address show whether water could reach oil sumps and chip storage, the point at which a flood claim also becomes a pollution claim.
  • Parcel and permit data give the construction date and permit history, flagging old mill-type buildings where timber floors and past solvent use deserve questions.
  • The risk analysis API returns tornado, wind and earthquake scores in seconds, so older mill-type shops full of precision lathes are screened inside the quoting workflow.
Flood · Tornado · Wind · Earthquake
06 / Public loss data

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

3.6 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Precision turned product manufacturing
3.6
All private industry
2.3

1.0 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Precision turned product manufacturing (NAICS 332721). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

5 fatal work injuries in 2024.

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Machine Shops; Turned Product; and Screw, Nut, and Bolt Manufacturing (NAICS 3327), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

166 citations from 45 inspections; 58% were classed serious, willful or repeat.

  • 1910.147 The control of hazardous energy (lockout/tagout)
    29
  • 1910.1200 Hazard communication
    13
  • 1910.134 Respiratory protection
    11
  • 1910.212 General requirements for all machines
    10
  • 1910.178 Powered industrial trucks
    10

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Precision Turned Product Manufacturing (NAICS 332721). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

96 facilities reported toxic chemical releases totaling 450,572 pounds on and off site.

  • Copper compounds
    394,321
  • Lead compounds
    18,975
  • Chromium compounds
    10,596

Chemicals released in the largest amounts, in pounds. 69 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Precision Turned Product Manufacturing (NAICS 332721). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Product recall
A mixed or mis-graded lot of bolts or fittings can force customers to stop lines and pull finished goods.
Aircraft products liability
Turned fittings and fasteners sold into aerospace fall outside many general liability forms unless aircraft products cover is added.
Equipment breakdown
Multi-spindle automatics and cold headers are old, specialized machines whose broken parts can take months to source.
Site pollution liability
Decades of cutting oil and past chlorinated degreasing often leave soil and groundwater contamination under older shops.
Classification
SystemCodeIndustry
NAICS 2022, primary332721Precision Turned Product Manufacturing
NAICS 2022332722Bolt, Nut, Screw, Rivet, and Washer Manufacturing
SIC 1987, primary3451Screw Machine Products
SIC 19873452Bolts, Nuts, Screws, Rivets, and Washers
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →