Tool, die, mold and machine tool makers

Tool and die shops machine hardened steel into stamping dies, injection molds, cutting tools, jigs and fixtures, and some build presses and machine tools. A handful of costly mills, grinders and discharge machines, run by skilled people, produce one-off work, and customers' own dies sit in the shop for repair.

Manufacturing · NAICS 333514 · SIC 3544 · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Fires at oil-filled discharge machines left running unattended overnight

  2. 02

    Damage to customers' dies and molds held for repair or modification

  3. 03

    Long shutdowns after loss of a key machine, with customers' launches waiting

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Elevated, 3 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Five-axis machining, high-speed milling and lights-out running put more value and more unattended hours into each machine, raising fire and breakdown stakes.
  • Metal additive printing of mold inserts with conformal cooling brings fine metal powders, inert gas systems and new quality questions into tool shops.
  • Retiring toolmakers and few apprentices leave shops thin on skill, so losing one key person can delay work as badly as losing a machine.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Elevated
Sinker discharge machines spark inside tanks of combustible oil, and machining centers worth more than the building stand close together.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Lights-out machining with no detection or suppression at the machines
  • Oil mist residue on roof steel, lights and ducts
  • Magnesium or titanium work mixed with steel swarf
Controls that matter
  • Fixed extinguishing units and level and temperature cutoffs on discharge machines
  • Mist collectors on enclosed machines, with ducts cleaned
  • Sprinklers and a monitored alarm for unattended running

Business interruption

High
Five-axis mills, jig grinders and discharge machines have long lead times, and skilled toolmakers leave if the shop sits idle.

How long and how costly a shutdown is.

Watch for
  • One large machine that sets the maximum die size
  • Most revenue from one automotive or appliance customer
  • Design files and programs kept only on local servers
Controls that matter
  • Reciprocal capacity agreements with other shops
  • Off-site and offline backups of designs and machine programs
  • Service contracts with guaranteed response on key machines

Premises liability

Low
Customers' engineers visit for tryouts and approvals, but the public has no reason to enter.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Visitors on the floor during die tryouts in presses
Controls that matter
  • Escorted visits with eye protection and marked walkways

Products and completed work

Elevated
A die or mold that cracks or runs out of tolerance stops a customer's line, and a broken die can injure a press operator.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Contracts accepting consequential losses or production guarantees
  • Tooling for safety-critical or medical parts
  • Presses or machine tools built and sold under the insured's own name
Controls that matter
  • First-article inspection reports signed off by the customer
  • Contract terms limiting liability to repair or replacement
  • Material certificates and heat treatment records kept for each tool

Workers’ injury

Elevated
Cuts, eye injuries and crushed hands from machines and heavy die sections, plus skin and lung effects from coolants and carbide dust.

Injuries and illness to employees.

Watch for
  • Die halves turned or stacked with improvised rigging
  • Dry grinding of carbide without dust capture
Controls that matter
  • Rated lifting points, die carts and trained crane users
  • Interlocked machine enclosures left working, not bypassed
  • Coolant quality managed and wet or extracted grinding

Commercial auto

Moderate
A pickup or flatbed delivers finished tooling and collects repairs, usually within the region.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Heavy dies on light trucks with weak load restraint
Controls that matter
  • Loads blocked and chained, with weight checked against vehicle rating

Crime and theft

Moderate
Carbide inserts, copper and graphite electrodes and tool steel have scrap value, and design files are worth stealing.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Carbide tooling and scrap bins accessible after hours
  • Customer design data on unprotected networks
Controls that matter
  • Locked tool cribs with usage tracked by job
  • Access controls and offline backups for design data

Inland marine and equipment

Elevated
Customers' dies and molds, often worth more than any machine, sit in the shop and travel on the insured's truck.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • No record of the value of customers' tooling on site
  • Rigging and loading of heavy tools done by shop staff
Controls that matter
  • Bailee and transit limits set to the most valuable tool handled
  • Condition photographed and agreed when tooling arrives

Environmental

Moderate
Coolants, discharge machine oil, way lubricants and oily swarf are the wastes; volumes are modest and well understood.

Pollution on or from the site or the work.

Watch for
  • Swarf bins draining oil onto unsealed ground outdoors
  • Old degreasing tanks that used chlorinated solvents
Controls that matter
  • Covered, contained swarf storage with oil recovery
  • Licensed collection of spent coolant and oils

Cyber and data

Elevated
Customer part models, tooling designs and machine programs live on networked workstations and controls; ransomware or theft stops work and exposes customers' secrets.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Large design files exchanged through personal email or open file shares
  • Machine controls left open to builders' remote service access
  • Defense or automotive customers imposing data security terms
Controls that matter
  • Offline, tested backups of designs and machine programs
  • Vendor remote access enabled only on request and logged

Professional liability

Elevated
Shops design tooling to make customers' parts; a design error delays a product launch and brings large financial claims without any injury.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Full design responsibility for tooling, including changes to the part design
  • Mold-flow simulation or process engineering sold as separate services
  • Fixed delivery dates tied to a customer's launch, with penalties
Controls that matter
  • Design reviews signed off by the customer before steel is cut
  • Contract limits on consequential loss and late-delivery penalties

Umbrella and excess

Elevated
A die that shatters in a press, or a press sold with weak guarding, can cause amputations and long-tail suits that exceed primary limits.

How likely one liability event is to exhaust primary limits.

Watch for
  • Presses or forming machines in service for decades under many owners
  • Heavy die sets delivered and set by shop staff at customers' plants
Controls that matter
  • Guarding and safety controls designed in on every machine sold
  • Written handover and setup procedures for dies at customers' plants
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Small to mid-size single-story steel or masonry buildings in industrial parks, with reinforced floors for heavy machines, overhead cranes and an office mezzanine.
Occupancy
Oil-filled discharge machines, coolant-flooded mills and grinders running lights-out, graphite electrode cutting, die tryout presses and stored customers' molds and dies.
Protection
Sprinklers with monitored alarms, fixed extinguishing and level cutoffs on discharge machines, mist collection, and secured storage for customers' tooling and design data.
Exposure
Shops often cluster with machine shops and molders in the same park, so one fire or flood there can reach several insured shops and their customers' tooling.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: work and customers

On site: machines and fire protection

On site: continuity

On site: people and handling

Refer or decline if you find

  • Sinker discharge machines running overnight with no fire detection or suppression
  • Unsprinklered shop with oil residue coating the roof structure
  • Contracts accepting unlimited consequential damages for late or defective tooling
  • Customers' molds on site with no bailee cover
05 / Location

How UrbanStat data helps.

Precision machines sit on ground-floor foundations and are written off by a few inches of water. Earthquake knocks machines out of alignment, and a wind-damaged roof lets rain onto spindles, controls and customers' tooling.

FloodTornadoWindEarthquake
  • Flood scores at the address show whether ground-floor machining centers and customers' dies would be reached by shallow flooding.
  • Street-by-street exposure views reveal how many insured shops and their customers' tooling cluster in one industrial park, with alerts at a set threshold.
  • Earthquake and wind scores for the site inform terms for precision machines that lose alignment or suffer water damage long before the building fails.
Flood · Tornado · Wind · Earthquake
06 / Public loss data

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

2.8 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Special die and tool, die set, jig, and fixture manufacturing
2.8
All private industry
2.3

1.2 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Special die and tool, die set, jig, and fixture manufacturing (NAICS 333514). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

21 fatal work injuries in 2024, most often from contact with objects and equipment (7).

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Machinery Manufacturing (NAICS 333), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

169 citations from 37 inspections; 61% were classed serious, willful or repeat.

  • 1910.147 The control of hazardous energy (lockout/tagout)
    21
  • 1910.1200 Hazard communication
    14
  • 1910.212 General requirements for all machines
    7
  • 1910.134 Respiratory protection
    6
  • 1910.303 General (electrical)
    6

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Special Die and Tool, Die Set, Jig, and Fixture Manufacturing (NAICS 333514). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

22 facilities reported toxic chemical releases totaling 32,255 pounds on and off site.

  • Ammonia
    14,760
  • Toluene
    6,237
  • Chromium
    3,958

Chemicals released in the largest amounts, in pounds. 12 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Special Die and Tool, Die Set, Jig, and Fixture Manufacturing (NAICS 333514). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Equipment breakdown
Spindle crashes, control failures and power surges disable costly machines without any fire.
Product recall
Presses and machine tools sold under the shop's name need guarding or control retrofits at every buyer's plant if a defect emerges.
Contingent business interruption
A fire at the main automotive or appliance customer's plant stops new orders for months.
Employment practices
Shops competing for scarce skilled toolmakers face wage, non-compete and discrimination disputes.
Classification
SystemCodeIndustry
NAICS 2022, primary333514Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
NAICS 2022333511Industrial Mold Manufacturing
NAICS 2022333515Cutting Tool and Machine Tool Accessory Manufacturing
NAICS 2022333517Machine Tool Manufacturing
NAICS 2022333519Rolling Mill and Other Metalworking Machinery Manufacturing
SIC 1987, primary3544Special Dies and Tools, Die Sets, Jigs and Fixtures, and Industrial Molds
SIC 19873545Cutting Tools, Machine Tool Accessories, and Machinist Precision Measuring Devices
SIC 19873541Machine Tools, Metal Cutting Types
SIC 19873542Machine Tools, Metal Forming Type
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →