Electroplating and metal finishing shops

Plating shops clean customers' metal parts and coat them in tanks of acids, cyanides and metal salts, using rectifiers, heaters and exhaust scrubbers. Corrosive air attacks wiring and steel, heated plastic tanks catch fire, and every spill or rinse carries heavy metals toward the drain.

Manufacturing · NAICS 332813 · SIC 3471 · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Soil and groundwater contamination from tank leaks, floor trenches and decades of rinse water

  2. 02

    Fires started by immersion heaters in plastic tanks or by corroded electrical gear

  3. 03

    Chemical burns, toxic fume exposure and slips among line operators

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: High, 4 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Hexavalent chromium and other legacy chemistries are being phased down, and switching to trivalent or alternative processes brings new baths, controls and quality risks during the changeover.
  • Tighter discharge limits and restrictions on persistent fume suppressants put older wastewater systems out of compliance and raise the cost of cleaning up a contaminated site.
  • Electric vehicle, battery and electronics work brings new finishes and automated high-volume lines, while automated hoists cut operator contact with open tanks.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

High
Immersion heaters, plastic tanks and plastic exhaust ducts sit in an atmosphere that corrodes wiring, sprinklers and structural steel.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Heaters with no low-liquid cutoff, or left energized overnight
  • Plastic fume ducts and scrubbers with no sprinklers inside
  • Nitric or chromic acid stored beside solvents, lacquers or other organics
Controls that matter
  • Low-level and over-temperature cutoffs on every heated tank
  • Corrosion-resistant sprinklers and wiring, inspected and replaced on schedule
  • Acids, cyanides and oxidizers in separate, curbed storage rooms

Business interruption

Elevated
A tank line fire or a suspended discharge permit stops all work, and customers move parts to another finisher quickly.

How long and how costly a shutdown is.

Watch for
  • One rectifier, scrubber or wastewater unit serving every line
  • Aerospace or medical approvals tied to this specific site
Controls that matter
  • Spare rectifiers, pumps and heaters held on site
  • Standing arrangement with another approved finisher for overflow work

Premises liability

Moderate
Few visitors, but a fume release or chemical reaction can reach neighboring units and passers-by.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Shared multi-tenant building with common walls or ventilation
  • Bulk chemical deliveries pumped in from the street side
Controls that matter
  • Labeled fill connections and supervised bulk deliveries
  • Emergency plan agreed with neighbors and the fire service

Products and completed work

Elevated
A coating that flakes, corrodes early or embrittles a high-strength part can fail in a vehicle, aircraft or machine.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • High-strength fasteners or springs plated without a baking step
  • Aerospace, automotive safety or medical parts in the work mix
Controls that matter
  • Embrittlement relief bake logged for every hardened steel lot
  • Thickness, adhesion and salt-spray tests recorded against each job
  • Customer specifications reviewed and signed off before processing

Workers’ injury

High
Operators work over hot acids, caustics, cyanide and chromium solutions on wet floors, lifting racks and barrels by hand.

Injuries and illness to employees.

Watch for
  • Hand-carried racks over open tanks instead of hoists
  • Hexavalent chromium or cadmium lines with weak local exhaust
  • No eyewash or shower within seconds of the tanks
Controls that matter
  • Local exhaust on every fuming tank, with airflow measured regularly
  • Face shields, aprons and gloves matched to each chemical
  • Air and medical monitoring for chromium, cadmium, nickel and cyanide

Commercial auto

Moderate
Light trucks collect and return customers' parts, and some shops haul chemicals or waste.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Drivers carrying drums of chemicals or sludge in open trucks
  • Daily pickup routes across a wide radius
Controls that matter
  • Driving record checks and secured, labeled loads
  • Licensed haulers used for all hazardous waste

Crime and theft

Moderate
Gold, silver, palladium and rhodium salts and anodes are compact, valuable and easy to carry out.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Precious metal plating with no usage reconciliation
  • Copper and nickel anodes stored in an unlocked yard
Controls that matter
  • Precious metals in a safe, issued and weighed by two people
  • Monitored alarm and cameras covering chemical and anode stores

Inland marine and equipment

Elevated
Everything on the line belongs to customers, and a bad bath or fire can ruin a whole batch of machined parts.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • High-value aerospace or tooling components held for days
  • No stated limit of liability on work orders
Controls that matter
  • Bailee cover sized to peak values of customers' parts
  • Incoming count and condition recorded for every lot

Environmental

High
Cyanide, hexavalent chromium, cadmium, nickel and acids pass through floor trenches, sumps and wastewater treatment every working day.

Pollution on or from the site or the work.

Watch for
  • Cracked or uncoated concrete under tanks and in trenches
  • Older site with past degreasing using chlorinated solvents
  • Sludge drums accumulating beyond permitted storage time
Controls that matter
  • Sealed, bermed containment under every tank with leak detection
  • Treatment plant with continuous pH and metals monitoring before discharge
  • Baseline soil and groundwater study before binding

Cyber and data

Moderate
Job travelers, customer drawings and rectifier controls sit on a small network; ransomware delays work but little personal data is held.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Aerospace or defense customers requiring controlled handling of technical data
  • Line controllers and wastewater monitoring reachable over the internet
Controls that matter
  • Offline backups of job records, specifications and certifications
  • Process controllers on a separate network with no direct remote access

Professional liability

Moderate
Shops issue certificates of conformance and test results that customers rely on to release parts without inspecting them again.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Certificates signed before thickness or adhesion tests are complete
  • In-house lab testing parts for other shops as a paid service
Controls that matter
  • Certificates generated only from recorded test data and checked by a second person
  • Test equipment calibrated on schedule with records kept

Umbrella and excess

Elevated
A cyanide or acid gas release reaching neighbors, or embrittled fasteners failing in aircraft or vehicles, can exceed primary limits.

How likely one liability event is to exhaust primary limits.

Watch for
  • Cyanide lines in dense mixed-use or residential surroundings
  • Plating of flight-critical or automotive safety fasteners
Controls that matter
  • Acids kept physically apart from cyanide baths and their drains
  • Contract terms limiting liability to rework or replacement of parts
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Older single-story masonry or steel buildings, often with roof decks and steel corroded by acid fumes, plastic ductwork overhead and process pits cut into the floor.
Occupancy
Rows of heated plastic tanks holding acids, caustics, cyanide and metal salts, high-current rectifiers, buffing dust, solvent degreasing and a wastewater treatment room.
Protection
Sprinklers inside plastic ducts and scrubbers as well as over the lines, low-level heater cutoffs, curbed and segregated chemical rooms, and monitored alarms for unattended hours.
Exposure
Often in older industrial districts beside homes or other small shops, where a fume release, fire runoff or spill reaches neighbors, storm drains and the sewer quickly.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: processes and chemicals

On site: building and protection

On site: containment and waste

On site: line operators

Refer or decline if you find

  • Immersion heaters in plastic tanks with no low-level cutoff
  • Stained, cracked floors or trenches with no containment beneath tanks
  • Cyanide and acid containers stored together
  • Repeated wastewater discharge violations or an open cleanup order
  • Heavily corroded sprinkler piping and electrical panels above the lines
05 / Location

How UrbanStat data helps.

Floodwater that overtops open tanks carries cyanide and metals off site, turning a property loss into a pollution claim. Earthquake sloshes and cracks tanks. Wind damage to roofs and scrubber stacks lets rain into the baths.

FloodEarthquakeHurricaneWind
  • Flood scores at the address show whether open process tanks and chemical stores sit where rising water would carry their contents off site.
  • Parcel and permit data give the construction date and permit history, a quick check on the building's age and on when process lines or ventilation were altered.
  • Earthquake scores for the site inform terms where rows of liquid-filled tanks and overhead plastic ductwork would spill or collapse in strong shaking.
Flood · Earthquake · Hurricane · Wind
06 / Public loss data

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

4.1 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Electroplating, plating, polishing, anodizing, and coloring
4.1
All private industry
2.3

1.3 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Electroplating, plating, polishing, anodizing, and coloring (NAICS 332813). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

7 fatal work injuries in 2024.

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Coating, Engraving, Heat Treating, and Allied Activities (NAICS 33281), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

304 citations from 78 inspections; 71% were classed serious, willful or repeat.

  • 1910.134 Respiratory protection
    37
  • 1910.1200 Hazard communication
    23
  • 1910.305 Wiring methods, components, and equipment for general use
    19
  • 1910.1026 Chromium (VI)
    18
  • 1910.132 General requirements (personal protective equipment)
    16

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Electroplating, Plating, Polishing, Anodizing, and Coloring (NAICS 332813). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

434 facilities reported toxic chemical releases totaling 9.3 million pounds on and off site.

  • Zinc compounds
    3.6M
  • Nitrate compounds
    1.5M
  • Chromium and chromium compounds
    778,336

Chemicals released in the largest amounts, in pounds. 198 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Electroplating, Plating, Polishing, Anodizing, and Coloring (NAICS 332813). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Pollution legal liability
General liability pollution exclusions leave gradual soil and groundwater contamination under tanks and trenches uninsured.
Equipment breakdown
Rectifiers, scrubber fans and treatment pumps fail electrically and stop every line without any fire.
Transportation pollution
Spent baths and sludge carried on the shop's own trucks can spill on public roads, outside site pollution cover.
Rework and recall expense
Faulty plating found after assembly forces customers to strip, replate or replace parts, and they bill the shop.
Classification
SystemCodeIndustry
NAICS 2022, primary332813Electroplating, Plating, Polishing, Anodizing, and Coloring
SIC 1987, primary3471Electroplating, Plating, Polishing, Anodizing, and Coloring
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →