Ornamental and architectural metal shopsNAICS 332323 · SIC 3446

Ornamental and architectural metal shops forge, weld and finish custom railings, gates, stairs, balconies and grilles, and some build metal doors, frames and window systems, then install them at homes and commercial buildings. Small crews work with fire, grinding and heavy pieces, and the finished work must hold people back from a fall.

NAICS 332323 Ornamental and Architectural Metal Work ManufacturingSIC 3446 Architectural and Ornamental Metal WorkNAICS 332321 Metal Window and Door Manufacturing+1 more code

Manufacturing · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Railings, balconies, stairs or gates that fail and injure occupants years later

  2. 02

    Burns, eye injuries, strains and falls in the shop and during installation

  3. 03

    Fires from forges, welding and spray finishing in small workshops

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Elevated, 3 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Elevated, 3 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Elevated, 3 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • CNC plasma and laser tables let small shops cut intricate patterns quickly, shifting effort from hand forging to design and installation.
  • Automated gates with remote and app control are now common on homes and estates, raising entrapment and crush exposure from completed work.
  • Glass and cable railing systems and aluminum storefronts draw shops into specification work they once left to glaziers and engineers.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Elevated
Forge, welding, grinding and spray painting share one small building, often with paints, gas cylinders and timber stock close by.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Spray painting in the open shop with no booth
  • Coal or gas forge beneath a combustible roof
  • Acetylene, propane and oxygen cylinders stored loose
Controls that matter
  • Enclosed, ventilated finishing area separated from hot work
  • Flammable liquids kept in a rated cabinet
  • Cylinders chained, capped and separated by gas type

Business interruption

Moderate
Tools are basic and commissions can be delayed or finished elsewhere.

How long and how costly a shutdown is.

Watch for
  • Reputation resting on one master smith
Controls that matter
  • Templates, drawings and client files backed up off site

Premises liability

Elevated
Installation means welding, drilling and hoisting heavy pieces inside finished homes and over public sidewalks.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Site welding near furnishings, insulation or dry vegetation
  • Core drilling into balconies and slabs with hidden services
  • Temporary removal of existing guards during replacement
Controls that matter
  • Fire blankets, extinguisher and fire watch for all site welding
  • Temporary barriers wherever a guard is removed
  • Scanning for services and reinforcement before drilling

Products and completed work

High
Guards, handrails, balconies, stairs and heavy gates are life-safety items; a failed anchor or weld means a fall or a crushing.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Automated driveway gates and their operators
  • Balconies, stairs and fire escapes built without engineered design
  • Fire-rated doors and frames whose rating depends on how they are assembled
Controls that matter
  • Engineered load calculations for guards, stairs and balconies
  • Certified welders and documented anchor selection and installation
  • Entrapment protection and fall-over stops on every gate

Workers’ injury

High
Hot metal, power hammers, grinders and welding in the shop, then lifting heavy assemblies up stairs and onto balconies.

Injuries and illness to employees.

Watch for
  • Grinding and welding without eye protection or screens
  • Two-person crews manhandling long railings at height
  • Painted or galvanized steel welded without extraction
Controls that matter
  • Welding helmets, face shields and fume extraction in use
  • Hoists, carts and site lifting plans for heavy pieces
  • Fall protection for balcony and stair installation

Commercial auto

Elevated
Pickups, flatbeds and trailers haul long, heavy fabrications to sites most days.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Gates and railings overhanging trailers
  • Portable welders and cylinders carried in enclosed vans
Controls that matter
  • Load securing with flagged overhangs and trailer checks
  • Cylinders carried upright in ventilated vehicles

Crime and theft

Moderate
Welders, hand tools and bronze, brass or copper stock are worth stealing; cash is minor.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Tools and welders left in trucks overnight
  • Deposits on commissions handled by one person
Controls that matter
  • Locked tool storage and marked equipment
  • Deposits banked to the business account with job records

Inland marine and equipment

Elevated
Weeks of labor sit in a single gate or stair while it travels, waits on site and is fitted.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • High-value commissions for estates or public buildings
  • Antique ironwork taken in for restoration
Controls that matter
  • Installation floater with limits matched to the largest commission
  • Condition reports and agreed values for customers' pieces

Environmental

Moderate
Paints, thinners, patina acids and blasting dust are present in workshop quantities.

Pollution on or from the site or the work.

Watch for
  • Lead paint removed from old ironwork
  • Patina and pickling acids rinsed to drain
Controls that matter
  • Lead-safe stripping methods with waste collected
  • Licensed disposal of spent solvents and acids

Cyber and data

Moderate
Drawings, client files and deposits move by email; spoofed payment instructions and ransomware on design files are the realistic losses.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Customer deposits paid on emailed bank details
  • CNC plasma and laser tables on the office computer network
Controls that matter
  • Call-back check on any change to payment details
  • Offline backups of drawings and cutting programs

Professional liability

Elevated
Many shops design stairs, balconies and guards themselves, so a wrong load assumption or anchor detail is their professional error.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Design-build stairs and balconies with no outside engineer
  • Glass or cable railing systems detailed by shop staff
Controls that matter
  • Licensed engineer calculations and stamped drawings for structural items
  • Written scope stating who is responsible for design

Umbrella and excess

High
A balcony or stair that collapses under a crowd, or a gate that crushes a child, can exceed primary limits.

How likely one liability event is to exhaust primary limits.

Watch for
  • Balconies and stairs for apartments, venues or public buildings
Controls that matter
  • Limits set by the largest occupied structure the shop has worked on
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Small single-story steel sheds, converted barns or garages and older masonry workshops, often with timber roof framing and an outdoor yard for steel stock and finished pieces.
Occupancy
Coal or gas forging, welding, plasma cutting, grinding and spray finishing in one open space, with fuel gases, paints and thinners close to hot work.
Protection
A finishing room or booth separated from hot work, cylinders chained by gas type, flammables in rated cabinets, extinguishers at each station and a monitored alarm.
Exposure
Rural and edge-of-town shops sit near dry vegetation with long fire service response; urban shops share walls with other trades in older industrial rows.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: work performed

On site: shop

On site: installation

Refer or decline if you find

  • Balconies or stairs built with no engineer's input
  • Automated gates installed without entrapment protection
  • Spray finishing next to welding and grinding
  • Window bars fitted to bedrooms without quick release
05 / Location

How UrbanStat data helps.

Welders, tools and nonferrous stock draw thieves to lightly secured sheds. Many shops are rural or edge-of-town, where sparks meet dry vegetation and help is distant, and yards of stored steel and finished work flood.

CrimeWildfireFloodWind
  • Crime scores at the address inform theft terms for welders, tools and bronze or copper stock in lightly secured workshops.
  • Wildfire scores at the address show whether a shop that forges, grinds and welds stands among vegetation that could carry fire to or from the building.
  • Parcel and permit data give the building's age and permit history, a prompt to ask whether a converted barn or garage was altered for forge and welding use.
Crime · Wildfire · Flood · Wind
06 / Public loss data · NAICS 332323

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

4.0 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Ornamental and architectural metal work manufacturing
4.0
All private industry
2.3

1.4 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Ornamental and architectural metal work manufacturing (NAICS 332323). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

8 fatal work injuries in 2024, most often from contact with objects and equipment (3).

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Ornamental and Architectural Metal Products Manufacturing (NAICS 33232), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

334 citations from 75 inspections; 58% were classed serious, willful or repeat.

  • 1910.134 Respiratory protection
    40
  • 1910.212 General requirements for all machines
    22
  • 1910.147 The control of hazardous energy (lockout/tagout)
    21
  • 1910.178 Powered industrial trucks
    18
  • 1910.1200 Hazard communication
    18

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Ornamental and Architectural Metal Work Manufacturing (NAICS 332323). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

22 facilities reported toxic chemical releases totaling 123,445 pounds on and off site.

  • Aluminum
    33,562
  • Diisocyanates
    31,977
  • Copper
    20,020

Chemicals released in the largest amounts, in pounds. 14 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Ornamental and Architectural Metal Work Manufacturing (NAICS 332323). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Customers' property in care
Antique gates and ironwork taken in for restoration are often irreplaceable and worth far more than the repair fee.
Contractors pollution
Stripping lead paint from old ironwork on site can contaminate soil and homes, which general liability often excludes.

NAICS and SIC codes for ornamental and architectural metal shops

SystemCodeIndustry
NAICS 2022, primary332323Ornamental and Architectural Metal Work Manufacturing
NAICS 2022332321Metal Window and Door Manufacturing
SIC 1987, primary3446Architectural and Ornamental Metal Work
SIC 19873442Metal Doors, Sash, Frames, Molding, and Trim
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →