Welding and metal cutting shopsNAICS 811310 · SIC 7692

Welding shops join, repair, cut and fabricate metal for industry, farms, builders and vehicle owners, from structural pieces to carports, in their own workshops and from mobile rigs at customers' sites. Sparks and molten slag travel far and smolder for hours, and a failed weld on a trailer, tank or lifting device hurts people later.

NAICS 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceSIC 7692 Welding RepairNAICS 332312 Fabricated Structural Metal ManufacturingNAICS 238190 Other Foundation, Structure, and Building Exterior Contractors+3 more codes

Other Services (except Public Administration) · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Fires started by sparks and slag at customers' premises, often discovered after the welder leaves

  2. 02

    Failure of welded or repaired items such as hitches, tanks, frames and lifting gear

  3. 03

    Burns, eye injuries and fume exposure among welders

How it comparesEach line’s rating against the average for its NAICS sector, Other Services (except Public Administration) (40 business types), and for all 747.
  1. PropertyProperty: Elevated, 3 of 5; sector average 2.5; all business types 2.9.
  2. Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
  3. Premises liabilityPremises liability: High, 4 of 5; sector average 2.9; all business types 2.7.
  4. Products and completed workProducts and completed work: High, 4 of 5; sector average 2.5; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 2.5; all business types 3.0.
  6. Commercial autoCommercial auto: Elevated, 3 of 5; sector average 2.1; all business types 2.5.
  7. Crime and theftCrime and theft: Moderate, 2 of 5; sector average 2.1; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.1; all business types 2.6.
  9. EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 1.8; all business types 2.3.
  10. Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.2; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 2.2; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.1; all business types 3.6.
What’s changing
  • Fiber laser and high-definition plasma tables replace torches in many shops, cutting faster but adding costly, networked machinery with long replacement lead times.
  • Tighter exposure limits for stainless and manganese fumes push shops toward extraction and powered respirators, while occupational disease claims become more common.
  • Mobile welders increasingly find work through apps and online listings, often at unfamiliar sites with no hot work permit system of their own.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Elevated
The shop is usually noncombustible, but oxygen and fuel gas cylinders, paint, oily parts and constant sparks make fires and cylinder explosions credible.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Welding near stored paint, solvents or cardboard
  • Cylinders unsecured, uncapped or stored with oxygen beside fuel gas
  • Wood-frame or shared-tenancy buildings
Controls that matter
  • Designated welding bays with noncombustible floors and screens
  • Cylinder storage separated, chained and ventilated
  • End-of-day fire check after the last hot work

Business interruption

Moderate
Welding machines are easily replaced; custom jobs in progress and a few large cutting tables are the bottlenecks.

How long and how costly a shutdown is.

Watch for
  • Laser or plasma cutting table with long replacement lead time
Controls that matter
  • Arrangements with nearby shops to finish urgent jobs

Premises liability

High
Mobile welders bring ignition into barns, plants, tanks and buildings under repair, and fires break out after they have gone.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Hot work on or near tanks and drums that held flammables
  • Work inside grain, wood, paper or plastics facilities
  • No fire watch once the job is finished
Controls that matter
  • Written hot work permit agreed with the site owner
  • Combustibles moved or covered and a fire watch kept afterward
  • Gas-free certification before welding on any container

Products and completed work

High
Welds carry loads: a cracked hitch, trailer frame, pressure part or lifting lug fails in use and injures someone.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Repairs to pressure vessels, tanks, cranes or lifting attachments
  • Vehicle frame, steering or suspension welding
  • Fabrication to the shop's own design
Controls that matter
  • Welders qualified to written procedures for each material
  • Weld inspection or testing on load-bearing work
  • Refusal or referral of coded pressure and lifting work

Workers’ injury

Elevated
Burns, arc flash to the eyes, cuts and strains are routine; fumes from stainless, galvanized and coated metal cause lasting harm.

Injuries and illness to employees.

Watch for
  • Welding in tanks and confined spaces
  • Stainless or galvanized work without local exhaust
  • Heavy plate handled without cranes or hoists
Controls that matter
  • Fume extraction at source and respirators where needed
  • Helmets, gloves and flame-resistant clothing worn consistently
  • Confined-space entry procedure with attendant and ventilation

Commercial auto

Elevated
Mobile rigs carry engine-driven welders and compressed gas cylinders to farms, plants and construction sites.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Cylinders carried loose or inside closed vans
  • Rush call-outs to breakdowns at night
Controls that matter
  • Cylinders upright, capped and secured in ventilated racks
  • Driving records checked for mobile welders

Crime and theft

Moderate
Welders, leads, torches and nonferrous stock are attractive to thieves; cash handling is light.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Mobile rigs parked outside overnight with equipment aboard
Controls that matter
  • Locked compound and marked, inventoried equipment

Inland marine and equipment

Elevated
Mobile welding rigs and tools work off premises, and customers' machinery, trailers and parts wait in the shop for repair.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • High-value customer equipment in the shop for extended periods
  • Fabricated railings, stairs or carports awaiting installation at sites
Controls that matter
  • Tool and equipment schedule plus cover for customers' property

Environmental

Moderate
Fumes, spent abrasives, cutting fluids, paint and metal dust are generated in small quantities.

Pollution on or from the site or the work.

Watch for
  • Pickling acids or degreasing solvents used for finishing
  • Paint spraying without a booth
Controls that matter
  • Waste fluids and dust collected by a licensed handler

Cyber and data

Moderate
Cutting files, quotes and invoices sit on a few computers; ransomware stops laser and plasma tables that load jobs from the network.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Cutting tables connected for remote support by the machine supplier
  • Invoices and payment changes handled by email only
Controls that matter
  • Offline backups of cutting programs and job files
  • Call-back check on any change to payment details

Professional liability

Moderate
Shops that design trailers, racks, platforms and brackets make engineering choices that no weld inspection can correct.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Load-bearing items built to the shop's own drawings
  • Weld procedures written without a qualified reviewer
Controls that matter
  • Engineer review and stamp for structural and lifting designs
  • Drawings and load ratings kept with each job

Umbrella and excess

High
A site fire can destroy a customer's plant or barn, and a failed hitch or lifting lug can kill.

How likely one liability event is to exhaust primary limits.

Watch for
  • Hot work in grain, wood, plastics or fuel facilities
  • Trailer, hitch, lifting or structural work sold to the public
Controls that matter
  • Hot work permit and fire watch on every outside job
  • Coded lifting and pressure work refused without certification
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Steel or masonry shop buildings with high bays and overhead cranes in larger shops; small shops often in older metal sheds or farm buildings, some wood-framed.
Occupancy
Arc welding, oxy-fuel cutting, plasma and laser tables and grinding throw sparks and slag beside oxygen and fuel gas cylinders, paint, oily parts and customers' equipment.
Protection
Noncombustible floors and screens at welding bays, segregated and chained cylinder storage, fume extraction, extinguishers within reach, monitored alarms and a closing fire check.
Exposure
Sparks carry through open doors to yards, grass and neighboring buildings, and rural shops and job sites sit beside dry vegetation, barns, grain and timber.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: work performed

On site: shop

On site: site work

On site: people and records

Refer or decline if you find

  • Site welding with no hot work permit or fire watch
  • Welding on containers without cleaning and gas testing
  • Repairs to pressure vessels or lifting gear without certification
  • Cylinders stored loose beside welding bays
  • Welding bays in a wood-frame building with no screens or sprinklers
05 / Location

How UrbanStat data helps.

Mobile welding in dry rural country starts grass and brush fires, so wildfire conditions at job sites matter as much as at the shop. Yards with cylinders, rigs and metal stock draw theft.

WildfireCrime
  • Wildfire scores for the shop and for rural job addresses show where sparks from mobile welding land beside dry vegetation.
  • Parcel and permit data give the shop building's construction date and permit history, a first check on combustible construction and electrical upgrades.
  • Crime scores at the address inform security conditions for welding rigs, cylinders and metal stock kept in the yard.
Wildfire · Crime
06 / Public loss data · NAICS 811310

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

2.4 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Commercial and industrial machinery and equipment (except automotive and electronic) repair and maintenance
2.4
All private industry
2.3

1.0 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Commercial and industrial machinery and equipment (except automotive and electronic) repair and maintenance (NAICS 8113), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

30 fatal work injuries in 2024, most often from contact with objects and equipment (10).

Other services
3.3
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance (NAICS 81131), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

372 citations from 125 inspections; 57% were classed serious, willful or repeat.

  • 1910.134 Respiratory protection
    37
  • 1910.147 The control of hazardous energy (lockout/tagout)
    34
  • 1910.1200 Hazard communication
    21
  • 1910.178 Powered industrial trucks
    18
  • 1910.212 General requirements for all machines
    17

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance (NAICS 811310). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

10 facilities reported toxic chemical releases totaling 9,986 pounds on and off site.

  • Certain glycol ethers
    4,020
  • Nitrate compounds
    3,716
  • Manganese
    869

Chemicals released in the largest amounts, in pounds. 2 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance (NAICS 811310). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Bailee customers' goods
Customers' machinery, trailers and parts wait in the shop for repair and fall outside ordinary contents cover.
Installation floater
Fabricated stairs, railings and carports being installed at customers' sites stay at the shop's risk until accepted.
Equipment breakdown
Laser and plasma tables, compressors and large welding power sources fail electrically and halt cutting work.
Contractors pollution liability
Field welding on tanks, drums and pipework can release their contents or fumes at a customer's site.

NAICS and SIC codes for welding and metal cutting shops

SystemCodeIndustry
NAICS 2022, primary811310Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
NAICS 2022332312Fabricated Structural Metal Manufacturing
NAICS 2022238190Other Foundation, Structure, and Building Exterior Contractors
NAICS 2022332311Prefabricated Metal Building and Component Manufacturing
SIC 1987, primary7692Welding Repair
SIC 19873441Fabricated Structural Metal
SIC 19871799Special Trade Contractors, NEC
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →