Iron and steel erection contractorsNAICS 238120 · SIC 1791

Steel erectors hoist, set, bolt and weld the frames of buildings, bridges and plants, and many also place rebar, set precast concrete or install stairs, rails and decking. Work at height on a frame not yet stable makes falls, dropped loads and collapse the defining exposures, on site and after completion.

NAICS 238120 Structural Steel and Precast Concrete ContractorsSIC 1791 Structural Steel ErectionNAICS 238190 Other Foundation, Structure, and Building Exterior Contractors

Construction · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Falls from beams, decking and columns before the frame is fully connected

  2. 02

    Partial collapse during erection from missing bracing, guying or anchor bolts

  3. 03

    Connection or weld failures discovered after the structure is loaded

How it comparesEach line’s rating against the average for its NAICS sector, Construction (49 business types), and for all 747.
  1. PropertyProperty: Moderate, 2 of 5; sector average 2.2; all business types 2.9.
  2. Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 1.8; all business types 2.7.
  3. Premises liabilityPremises liability: High, 4 of 5; sector average 3.5; all business types 2.7.
  4. Products and completed workProducts and completed work: Severe, 5 of 5; sector average 3.8; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Severe, 5 of 5; sector average 3.8; all business types 3.0.
  6. Commercial autoCommercial auto: Elevated, 3 of 5; sector average 3.1; all business types 2.5.
  7. Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.7; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: High, 4 of 5; sector average 3.2; all business types 2.6.
  9. EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.5; all business types 2.3.
  10. Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.0; all business types 2.7.
  11. Professional liabilityProfessional liability: Elevated, 3 of 5; sector average 2.3; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Severe, 5 of 5; sector average 4.0; all business types 3.6.
What’s changing
  • Larger modular units, longer spans and taller frames mean heavier picks and tighter sequencing, raising the cost of any dropped load or collapse.
  • Delegated connection design and fast-track schedules shift more engineering onto erectors, widening completed-work and design claims when a connection fails.
  • Self-retracting lifelines, remote-release rigging, drones and site cameras cut fall exposure and improve records, though a shortage of experienced connectors raises turnover.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Moderate
Own premises are usually a yard and small shop of noncombustible steel; the fire load is cutting gases, fuel and paint.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Shop fabrication with painting or coating on site
  • Oxygen and fuel gas cylinders stored together or unsecured
Controls that matter
  • Cylinders chained, capped and separated by gas type
  • Hot work kept clear of paint and fuel storage

Business interruption

Moderate
Revenue depends on cranes and key crews, not on a building; a crane loss or site shutdown delays contracts.

How long and how costly a shutdown is.

Watch for
  • One crane or one foreman carrying most of the workload
  • Contracts with liquidated damages for late completion
Controls that matter
  • Rental agreements in place for replacement cranes
  • Schedules with float agreed with the general contractor

Premises liability

High
Loads swing over other trades and the public, and sparks from welding and cutting start fires in buildings under construction.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Lifts over occupied buildings, streets or active rail
  • Renovation work inside operating plants or occupied structures
  • Contracts that take on the general contractor's liability
Controls that matter
  • Engineered lift plans with exclusion zones under every pick
  • Hot work permits with fire watch after welding stops
  • Contract review to strike broad indemnity clauses

Products and completed work

Severe
A frame that fails after handover can bring down a building; connection errors are hidden once fireproofing and cladding go on.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Field modifications made without the engineer's written approval
  • Rebar and precast connections buried in concrete before anyone rechecks them
  • Bridges, stadiums, mezzanines and other assembly structures
Controls that matter
  • Bolt tensioning and weld inspection by an independent testing firm
  • Welders certified for each process and position used
  • Records kept of every field change and its approval

Workers’ injury

Severe
Connectors and deckers work at height on narrow steel, with falls, struck-by and crushing injuries that are often fatal or disabling.

Injuries and illness to employees.

Watch for
  • Leading-edge decking work without fall arrest
  • High turnover of connectors hired job to job
  • Erection continuing in wind, rain or ice
Controls that matter
  • Full-time tie-off with engineered anchor points and perimeter cables
  • Site-specific erection plan with sequence and temporary bracing
  • Qualified riggers and signal persons on every lift

Commercial auto

Elevated
Tractor-trailers haul long, heavy members to site, and crews drive service trucks with welders and gas cylinders.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Oversize loads moved without permits or escorts
  • Crew trucks towing welders long distances to remote jobs
Controls that matter
  • Load securement checks before every departure
  • Driver qualification files and periodic record reviews

Crime and theft

Moderate
Welding leads, copper cable, tools and fuel disappear from open job sites; little cash is handled.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Gang boxes and welders left on unfenced sites
Controls that matter
  • Locked containers and equipment marked and inventoried per job

Inland marine and equipment

High
Cranes, welding machines and rigging are high-value mobile equipment, and steel is at risk until bolted, plumbed and accepted.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Owned cranes operated near capacity or on unverified ground
  • Fabricated steel stored on site before erection
Controls that matter
  • Annual crane inspection and daily operator checks, documented
  • Installation cover for steel in transit and awaiting erection

Environmental

Moderate
Diesel, hydraulic oil and paint are the usual pollutants; retrofit work can disturb lead paint on old steel.

Pollution on or from the site or the work.

Watch for
  • Cutting or welding on structures coated with lead-based paint
  • Fuel tanks for cranes kept on site without containment
Controls that matter
  • Coating tests before hot work on existing steel
  • Spill kits and drip trays with every fueled machine

Cyber and data

Moderate
Detailing models, shop drawings and payroll run on networked systems; ransomware or a fake supplier invoice delays steel and payments.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Detailing and fabrication files held on one office server
  • Supplier bank details changed on email instructions
Controls that matter
  • Offline backups of models and drawings, tested by restoring them
  • Callback checks before changing any supplier bank details

Professional liability

Elevated
Delegated connection design, detailing and erection engineering make the firm answer for calculations, not just workmanship.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Connection design or detailing done by in-house staff
  • Temporary bracing and erection sequence engineered in-house
Controls that matter
  • Delegated design done by licensed engineers carrying their own cover
  • Shop drawings approved by the engineer of record before fabrication

Umbrella and excess

Severe
A collapse during erection or a dropped load over a street can kill several people, and a failed frame threatens a whole building.

How likely one liability event is to exhaust primary limits.

Watch for
  • High-rise, stadium, bridge and other public assembly work
  • Lifts over occupied buildings, traffic or rail lines
Controls that matter
  • Project-specific excess limits or wrap-up programs on the largest jobs
  • Independent review of erection plans for complex or heavy lifts
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Usually a steel shop in a pre-engineered metal building with overhead cranes, and an open yard for members, decking, rebar and precast awaiting delivery.
Occupancy
Cutting, welding, drilling and painting of steel, with oxygen and fuel gas cylinders, diesel for cranes and coatings stored around the shop.
Protection
Cylinders caged and separated by gas type, paint kept apart from hot work, extinguishers at each station, and a fenced, lit yard with cameras.
Exposure
Yards sit in industrial areas; job sites are the real exposure, with loads swung over other trades, streets, rail lines and occupied buildings.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: work performed

On site: job sites

On site: cranes and vehicles

On site: records

Refer or decline if you find

  • No site-specific erection plan or temporary bracing design
  • Connectors working untied at height
  • Crane operators or riggers without documented qualification
  • Field cuts and weld changes made without engineer approval
  • Any prior collapse during erection
05 / Location

How UrbanStat data helps.

The yard matters less than the job sites. Partly erected frames are vulnerable to wind until braced, coastal and seismic sites raise design demands, and open sites in high-theft areas lose tools, leads and fuel.

WindTornadoHurricaneEarthquakeCrime
  • Wind and hurricane scores for a project address show how exposed a partly braced frame will be before installation cover is priced.
  • The risk analysis API returns wind and earthquake scores for a job-site address in seconds, so each new project is checked as it joins the installation schedule.
  • Crime scores at the yard and at job sites inform security conditions for cranes, welders and stored steel.
Wind · Tornado · Hurricane · Earthquake
06 / Public loss data · NAICS 238120

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

2.8 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Structural steel and precast concrete contractors
2.8
All private industry
2.3

0.8 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Structural steel and precast concrete contractors (NAICS 23812), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

19 fatal work injuries in 2024, most often from transportation incidents (5).

Construction
9.2
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Structural Steel and Precast Concrete Contractors (NAICS 23812), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

655 citations from 272 inspections; 71% were classed serious, willful or repeat.

  • 1926.453 Aerial lifts
    66
  • 1926.760 Fall protection
    55
  • 1926.501 Duty to have fall protection
    47
  • 1926.451 General requirements (scaffolds)
    46
  • 1926.1053 Ladders
    23

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Structural Steel and Precast Concrete Contractors (NAICS 238120). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Riggers' liability
Lifting and setting other parties' steel or equipment puts property in the erector's care, which general liability excludes.
Installation floater
Delivered and partly erected steel stays at the erector's risk from wind, theft and collapse until accepted.
Contractors' pollution liability
Cutting lead-coated steel and fuel spills from cranes fall under general liability pollution exclusions.
Contract surety bonds
General contractors and public owners require performance bonds, and bonding capacity caps the work the firm can take.
Wrap-up program enrollment
Big jobs often enroll erectors in owner or contractor programs; the firm's own policy excludes them, so short completed-work terms leave gaps.

NAICS and SIC codes for iron and steel erection contractors

SystemCodeIndustry
NAICS 2022, primary238120Structural Steel and Precast Concrete Contractors
NAICS 2022238190Other Foundation, Structure, and Building Exterior Contractors
SIC 1987, primary1791Structural Steel Erection
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →