Riggers and machinery moversNAICS 238290 · SIC 1796
Riggers move heavy or awkward loads such as presses, transformers, chillers and process vessels using slings, jacks, skates and gantries, often alongside a hired crane or a heavy hauler. They take charge of other people's high-value property at the moment it is most likely to be dropped.
NAICS 238290 Other Building Equipment ContractorsSIC 1796 Installation or Erection of Building Equipment, NECNAICS 238990 All Other Specialty Trade Contractors+1 more code
Where losses come from.
- 01
Loads dropped, tipped or struck during lifting, jacking and skating
- 02
Crush injuries to riggers caught between the load and structure
- 03
Damage to customers' floors, buildings and neighboring machinery during moves
- PropertyProperty: Moderate, 2 of 5; sector average 2.2; all business types 2.9.
- Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 1.8; all business types 2.7.
- Premises liabilityPremises liability: High, 4 of 5; sector average 3.5; all business types 2.7.
- Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 3.8; all business types 2.6.
- Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.8; all business types 3.0.
- Commercial autoCommercial auto: Elevated, 3 of 5; sector average 3.1; all business types 2.5.
- Crime and theftCrime and theft: Low, 1 of 5; sector average 1.7; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Severe, 5 of 5; sector average 3.2; all business types 2.6.
- EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.5; all business types 2.3.
- Cyber and dataCyber and data: Low, 1 of 5; sector average 2.0; all business types 2.7.
- Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 2.3; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 4.0; all business types 3.6.
- Data centers, battery plants and hospital imaging rooms bring frequent moves of very high-value, sensitive equipment, raising the value of a single dropped load.
- Hydraulic gantries, remote-controlled skates and load-monitoring shackles cut hands-on exposure, but crews must be trained on each new system.
- Customers push more consequential-loss and downtime liability onto riggers in contracts, while larger verdicts make each bystander injury costlier.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ModerateA shop and yard store slings, gantries, forklifts and sometimes customers' machinery between moves.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Customers' machines stored in the rigger's building for weeks
- Fuel and oxy-fuel cutting gear kept among stored equipment
- Stored customer property logged with values and agreed terms
- Cylinders and fuel segregated from storage areas
Business interruption
ModerateGantries, jacks and forklifts are specialized but rentable; experienced crews are the scarce resource.
How long and how costly a shutdown is.
- A handful of senior riggers holding all the planning knowledge
- Cross-trained foremen and equipment rental relationships
Premises liability
HighHeavy loads are moved inside working plants and over public areas, where a slip damages buildings and injures bystanders.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Moves inside occupied factories, hospitals or data centers
- Rooftop lifts over streets and neighboring buildings
- Floors and mezzanines of unknown load capacity
- Written rigging plan with weights, center of gravity and travel path
- Floor loading confirmed by the owner's engineer
- Barricaded exclusion zones and a single signal person
Products and completed work
ElevatedMachinery set out of level, poorly anchored or secured wrongly for transport fails after the rigger has left.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Loads blocked and chained for road transport by the rigger
- Installation and alignment offered as part of the move
- Sign-off with the owner or millwright after setting
- Securement to the carrier's written requirements, with photos
Workers’ injury
HighHands, feet and bodies are close to shifting loads of many tons, often at height or in cramped plant rooms.
Injuries and illness to employees.
- Riggers riding or steadying loads by hand
- Jacking and cribbing on uneven or soft surfaces
- Temporary crews brought in for big jobs
- Tag lines and push sticks so no one touches a suspended load
- Qualified riggers and signal persons on every lift
- Pre-lift briefing with stop authority for all crew
Commercial auto
ElevatedTrucks carry rigging gear, forklifts and gantries to sites; some firms also haul the loads themselves.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Oversize hauling done in-house without a specialized carrier
- Forklifts and gantries moved on undersized trailers
- Permits and route surveys for heavy moves
- Driver qualification and tie-down training
Crime and theft
LowNo cash or resale stock; rigging hardware, batteries and forklifts in the yard are the only draw.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Rigging gear and scrap stored in open yards
- Locked containers and a fenced, lit yard
Inland marine and equipment
SevereThe customer's machine on the hook or skates may be worth a fortune and take a year to replace.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Load values above the riggers' liability limit
- Contracts accepting consequential loss for the customer's downtime
- One-off or prototype machinery with no replacement
- Declared value obtained in writing before each job
- Contract terms limiting liability to an agreed amount
- Slings, shackles and hoists inspected, tagged and retired on schedule
Environmental
ModerateMachines moved often hold oil, coolant or refrigerant that spills when lines are cut or a unit tips.
Pollution on or from the site or the work.
- Transformers and old capacitors with contaminated oil
- Machines moved without draining fluids
- Fluids drained and lines capped by the owner before the move
- Spill kits and drip trays carried on every job
Cyber and data
LowRecords are mostly payroll, invoices and lift plans; an outage delays planning but rarely stops crews already on site.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Customer facility drawings for data centers or hospitals held insecurely
- Customer drawings stored on a managed system with limited access
Professional liability
ModerateRigging plans, load calculations and floor capacity checks are relied on by customers; errors show up as dropped or damaged loads.
Loss or injury caused by advice, design, testing, care or another professional service.
- Engineered lift or jacking plans prepared in-house without a licensed engineer
- Plant relocation planning or project management sold as a service
- Engineer review of critical lift, jacking and floor-load plans
- Scope of planning responsibility set out in each contract
Umbrella and excess
HighA load or hired crane falling into a street, an occupied floor or a neighbor's building can kill bystanders.
How likely one liability event is to exhaust primary limits.
- Rooftop picks over public streets in dense city blocks
- Moves inside hospitals, data centers or occupied offices
- Street closures and exclusion zones agreed with the local authority
- Limits matched to the most valuable building or load worked near
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- A high-bay steel or masonry warehouse with a fenced yard, sized to store gantries, forklifts, skates and customers' machinery between moves.
- Occupancy
- Storage of rigging gear and crated machinery, forklift fueling and charging, and oxy-fuel cutting for crating and repairs; little process fire load otherwise.
- Protection
- Sprinklers or monitored detection where customers' machinery is stored, separated cylinder and fuel storage, a lit and fenced yard and an intrusion alarm.
- Exposure
- The shop adds little; the exposure is at job sites, where loads cross busy streets, fragile floors and neighboring buildings.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: work performed
On site: planning
On site: gear and people
On site: contracts and history
Refer or decline if you find
- Load values routinely unknown before the lift
- Contracts accepting unlimited or consequential liability
- No inspection tags or records on slings and hardware
- Critical lifts without a written plan
- Customers' machinery stored long-term with no agreed terms
How UrbanStat data helps.
Outdoor and rooftop lifts are stopped or upset by wind. Customers' machinery staged in the rigger's yard or at a job site awaiting installation is exposed to flood, earthquake and theft while in the rigger's care.
- Wind scores at the lift address show how exposed a rooftop or open-yard lift is before the job is accepted.
- Flood and earthquake scores at the storage yard show what customers' machinery faces while it waits in the rigger's care.
- Street-by-street exposure views show insured value clustered around a customer plant where a move is planned, with alerts above a set threshold.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
1.4 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.
0.8 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Other building equipment contractors (NAICS 23829), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
6 fatal work injuries in 2024, most often from contact with objects and equipment (3).
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Other Building Equipment Contractors (NAICS 23829), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
172 citations from 59 inspections; 55% were classed serious, willful or repeat.
- 1926.451 General requirements (scaffolds)8
- 1910.134 Respiratory protection8
- 1910.178 Powered industrial trucks7
- 1910.95 Occupational noise exposure7
- 1910.1200 Hazard communication7
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Other Building Equipment Contractors (NAICS 238290). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Riggers' liability
- Damage to the customer's machine while it is being lifted or moved is excluded from general liability.
- Warehouse legal liability
- Customers' machinery stored in the rigger's building between moves needs its own cover and agreed terms.
- Motor truck cargo
- Loads the firm hauls on its own trailers are cargo, not rigging, once the truck leaves the site.
- Contractors' pollution liability
- Transformers and machines tipped or cut free during moves leak oil, coolant and refrigerant into floors and drains.
NAICS and SIC codes for riggers and machinery movers
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.