MillwrightsNAICS 238290 · SIC 1796
Millwrights dismantle, move, install, align and maintain production machinery, conveyors, turbines and pumps inside other companies' plants. They lift and skate multi-ton equipment through working factories, cut and weld in place, and hand back machines whose guards, anchors and alignment decide whether they run safely.
NAICS 238290 Other Building Equipment ContractorsSIC 1796 Installation or Erection of Building Equipment, NECNAICS 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance+1 more code
Where losses come from.
- 01
Crush and struck-by injuries while jacking, skating and lifting heavy machinery
- 02
Customer machinery dropped, tipped or damaged while in the millwright's hands
- 03
Hot work fires and production stoppages inside customers' plants
- PropertyProperty: Moderate, 2 of 5; sector average 2.2; all business types 2.9.
- Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 1.8; all business types 2.7.
- Premises liabilityPremises liability: High, 4 of 5; sector average 3.5; all business types 2.7.
- Products and completed workProducts and completed work: High, 4 of 5; sector average 3.8; all business types 2.6.
- Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.8; all business types 3.0.
- Commercial autoCommercial auto: Elevated, 3 of 5; sector average 3.1; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.7; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: High, 4 of 5; sector average 3.2; all business types 2.6.
- EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.5; all business types 2.3.
- Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.0; all business types 2.7.
- Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 2.3; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 4.0; all business types 3.6.
- Factory automation and robot cells bring more relocation and integration work, with tighter tolerances and guarding that must be proven at handover.
- Plants now schedule shorter, denser shutdowns, so crews work long shifts beside other contractors, which raises fatigue injuries and hot-work fire risk.
- Laser trackers and vibration sensors give documented alignment and condition records, which strengthen the defense when a machine fails after handover.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ModerateThe shop holds rigging gear, forklifts, welders and some fabrication; steel-heavy contents and a modest fire load.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Welding and cutting in the shop beside paint, oils or crated customer equipment
- Customer machinery stored at the shop between jobs
- Marked hot-work area kept clear of combustibles
- Values of customer equipment on the premises reported and insured
Business interruption
ModerateIncome is earned at customers' sites, but a shop loss can strand specialized rigging gear needed for scheduled shutdowns.
How long and how costly a shutdown is.
- Shutdown and turnaround contracts with penalties for late completion
- One gantry or heavy forklift that every large job depends on
- Rental sources lined up for lifts, gantries and skates
- Contracts that limit delay damages
Premises liability
HighCrews cut, weld and move heavy loads inside live plants, where a dropped machine or a fire stops the customer's whole line.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Hot work near dust collectors, oil mist, plastics or insulated panels
- Lifts made over running production lines or occupied areas
- Contracts accepting the customer's loss of production
- Hot-work permits with fire watch, issued jointly with the plant
- Written lift plans for critical picks, with floor loading checked
- Hold-harmless and consequential-loss wording reviewed before signing
Products and completed work
HighA machine left misaligned, badly anchored or without guards and interlocks injures operators or wrecks itself after start-up.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Guards, light curtains or interlocks removed for installation and not refitted
- Conveyors or platforms designed and fabricated in-house
- Used machinery relocated and recommissioned without the maker's documentation
- Commissioning checklist signed by the customer, covering guards and emergency stops
- Laser alignment and anchor torque records kept for each machine
- Engineer-stamped drawings for structural or conveyor design
Workers’ injury
HighWorkers handle multi-ton loads in tight spaces, weld, climb and enter machinery, often on long shutdown shifts in unfamiliar plants.
Injuries and illness to employees.
- Jacking and skating loads with improvised blocking
- Work on equipment not fully isolated from power, air or stored energy
- Long shutdown shifts with fatigue and temporary hires
- Lockout verified by the millwright's own lock on each energy source
- Qualified riggers and signalers; rated slings inspected before use
- Confined space and fall protection procedures agreed with the host plant
Commercial auto
ElevatedService trucks, flatbeds and trailers haul rigging gear and sometimes the customer's machinery between plants.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Oversize or top-heavy machinery hauled on the firm's own trailers
- Long drives home after extended shutdown shifts
- Load securement training and permits for oversize moves
- Heavy hauls given to specialized carriers
Crime and theft
ModerateTools, alignment instruments and rigging are valuable and portable, but little cash is handled.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Laser alignment kits and welders left in trucks at hotels during travel jobs
- Serial-numbered tool inventory and locked storage on trucks and at sites
Inland marine and equipment
HighThe firm takes custody of customers' machinery while moving it, and its own gantries, forklifts and jacks live on job sites.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Single machines worth more than the riggers' liability limit
- New equipment received and stored on site before installation
- Borrowed or rented cranes and lifts operated by the firm's crew
- Value of each item moved declared before the job and limits adjusted
- Installation and riggers' liability cover written for the largest lift
- Rented equipment insured as the rental contract requires
Environmental
ModerateDraining hydraulic oil, coolant and lubricants from old machines causes spills, usually small and inside the plant.
Pollution on or from the site or the work.
- Decommissioning of old transformers, presses or tanks with unknown fluids
- Cutting or grinding surfaces coated in lead paint
- Fluids drained into containers and handed to the customer's waste system
- Spill kits on every truck
Cyber and data
ModerateCrews plug laptops into customers' machine controls during commissioning, and the firm holds drawings and plant layouts customers treat as confidential.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Technicians' laptops connected to plant control networks without checks
- Customer drawings shared through personal email or messaging apps
- Dedicated, patched commissioning laptops scanned before connecting to customer systems
- Project files kept on a managed system with access by job
Professional liability
ModerateMost work follows the owner's or maker's design, but lift plans, foundation advice and alignment reports are relied on by customers.
Loss or injury caused by advice, design, testing, care or another professional service.
- Conveyors, platforms or machine bases designed in-house without an engineer
- Line layout or relocation planning sold as a consulting service
- Licensed engineer's stamp on structural, foundation and conveyor designs
- Design scope and responsibilities stated in writing for each job
Umbrella and excess
HighA hot-work fire that burns a customer's plant or a machine failure that kills operators can far exceed primary limits.
How likely one liability event is to exhaust primary limits.
- Work in food, chemical or paper plants with high fire loads
- Contracts requiring high limits and waiver of the customer's own insurance
- Limits matched to the largest plant value worked in
- Hot-work and lift rules enforced the same way on every shutdown
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- A steel or masonry shop with high bays, overhead cranes and a fenced yard, often in an older industrial district near the plants it serves.
- Occupancy
- Welding, cutting and machining of bases and guards, forklift charging and storage of rigging gear and customers' machinery; most hours are worked inside customers' plants.
- Protection
- A marked hot-work area, fire extinguishers at each welding station, separated battery charging, monitored alarms and sprinklers where stored machinery or crating adds combustibles.
- Exposure
- The shop's neighbors matter less than the customers' plants, where crews work beside dust collectors, oil mist, process heat and running lines.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: work performed
On site: job sites
On site: equipment and vehicles
On site: records and history
Refer or decline if you find
- Contracts accepting unlimited liability for the customer's downtime
- Critical lifts made without a written plan or qualified rigger
- Hot work in customers' plants with no permit or fire watch
- Machines handed back with guards or interlocks missing
- Values handled far above the riggers' liability limit
How UrbanStat data helps.
The shop matters less than where customers' plants are. Machinery awaiting installation sits on job sites exposed to flood, wind and earthquake, and service trucks loaded with instruments are targets wherever crews stay overnight.
- Flood and earthquake scores at each customer plant show the exposure to machinery in the firm's care during installation, before the installation limit is agreed.
- Street-by-street exposure views show whether several insured projects and plants cluster in one industrial area, with alerts when the total passes a set threshold.
- Crime scores at the shop address inform theft terms for rigging gear, welders and alignment instruments.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
1.4 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.
0.8 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Other building equipment contractors (NAICS 23829), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
6 fatal work injuries in 2024, most often from contact with objects and equipment (3).
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Other Building Equipment Contractors (NAICS 23829), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
172 citations from 59 inspections; 55% were classed serious, willful or repeat.
- 1926.451 General requirements (scaffolds)8
- 1910.134 Respiratory protection8
- 1910.178 Powered industrial trucks7
- 1910.95 Occupational noise exposure7
- 1910.1200 Hazard communication7
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Other Building Equipment Contractors (NAICS 238290). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
10 facilities reported toxic chemical releases totaling 9,986 pounds on and off site.
- Certain glycol ethers4,020
- Nitrate compounds3,716
- Manganese869
Chemicals released in the largest amounts, in pounds. 2 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance (NAICS 811310). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Riggers' liability
- Customers' machinery being lifted or moved is in the firm's care, where general liability excludes the damage.
- Installation floater
- New machinery received and stored on site before commissioning is at risk until the customer accepts it.
- Contractors' pollution liability
- Hydraulic oil, coolant and unknown fluids drained from old machines can spill into plant drains and soil.
- Rented equipment
- Cranes, aerial lifts and gantries rented for shutdowns must be insured as the rental contract requires.
NAICS and SIC codes for millwrights
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 238290 | Other Building Equipment Contractors |
| NAICS 2022 | 811310 | Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance |
| SIC 1987, primary | 1796 | Installation or Erection of Building Equipment, NEC |
| SIC 1987 | 7699 | Repair Shops and Related Services, NEC |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.