Industrial building contractorsNAICS 236210 · SIC 1541
Industrial building contractors build, expand and retrofit factories, process plants, power plants and water treatment plants, coordinating trade subcontractors and often self-performing concrete, steel or mechanical work. Much of it happens inside live plants beside hazardous processes and costly machinery, and owners' contracts load indemnity, delay penalties and lost production onto the contractor.
NAICS 236210 Industrial Building ConstructionSIC 1541 General Contractors Industrial Buildings and WarehousesNAICS 237120 Oil and Gas Pipeline and Related Structures ConstructionNAICS 237130 Power and Communication Line and Related Structures Construction+2 more codes
Where losses come from.
- 01
Hot work, rigging and heavy lifts inside running plants that ignite processes or wreck owners' equipment
- 02
Falls, crush injuries and process exposures among own and subcontracted crews on congested sites
- 03
Foundation, structural or process defects that halt the owner's production after handover
- PropertyProperty: Moderate, 2 of 5; sector average 2.2; all business types 2.9.
- Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 1.8; all business types 2.7.
- Premises liabilityPremises liability: High, 4 of 5; sector average 3.5; all business types 2.7.
- Products and completed workProducts and completed work: High, 4 of 5; sector average 3.8; all business types 2.6.
- Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.8; all business types 3.0.
- Commercial autoCommercial auto: Elevated, 3 of 5; sector average 3.1; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.7; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: High, 4 of 5; sector average 3.2; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.5; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.0; all business types 2.7.
- Professional liabilityProfessional liability: Elevated, 3 of 5; sector average 2.3; all business types 2.0.
- Umbrella and excessUmbrella and excess: Severe, 5 of 5; sector average 4.0; all business types 3.6.
- Battery, semiconductor and pharmaceutical plants bring clean rooms, toxic process gases and dense electrical work, raising installation values and the cost of any fire or contamination.
- Owners push design-build and fixed-price contracts with heavier delay damages, shifting design, schedule and lost production risk onto the contractor.
- Craft labor shortages fill plant shutdowns with traveling and temporary crews unfamiliar with each plant's permits, lockout and emergency procedures, raising injury and fire risk.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ModerateOwn premises are an office, yard and fabrication shop; the plants under construction are insured as builder's risk or installation.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Fabrication shop with welding and painting beside stored gas cylinders
- Fuel, formwork lumber and cable reels stacked in an open yard
- Hot work bay separated from paint, fuel and combustible storage
- Cylinders stored upright, chained and separated by gas type
Business interruption
ModerateRevenue follows project milestones, so a site loss or an owner shutdown delays billing while labor and equipment stand idle.
How long and how costly a shutdown is.
- A single plant contract carrying most of the annual revenue
- Liquidated damages tied to the owner's production start date
- Delay damages capped and excused for weather and owner-caused delay
- A spread of projects and owners across several industries
Premises liability
HighSparks, dropped loads and broken process lines inside operating plants damage the owner's equipment, injure plant staff and stop production.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Cutting and welding beside dust collectors, solvent tanks or foam-core panels
- Picks over pipe racks, running production lines or staffed areas
- Owner contracts making the contractor answer for lost production
- Hot work permits issued jointly with the plant, with extended fire watch
- Written lift plans for critical picks, with the area below barricaded
- Contract review that strikes broad-form indemnity and consequential loss
Products and completed work
HighSettling slabs under heavy machinery, failed process piping or a collapsing mezzanine stop the owner's output, and claims include lost production.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Design-build work where the firm answers for the whole plant
- Heavy-press, crane-rail or vibrating-machinery foundations
- Dust collection, ammonia refrigeration or process piping installed by own crews
- Independent testing of concrete, welds, bolting and pressure systems
- Commissioning records signed by the owner for each system handed over
- Engineer-stamped drawings for foundations, structure and process supports
Workers’ injury
HighCrews pour concrete, erect steel and work at height and in confined spaces beside live process lines and energized equipment.
Injuries and illness to employees.
- Entry into pits, tanks, vessels and other confined spaces
- Isolation of process lines and energy left to the host plant
- Night and shutdown shifts staffed with temporary craft labor
- Joint lockout with the contractor's own locks and verified zero energy
- Confined space permits, gas testing and a standby attendant
- Guardrails or tie-off at every elevated edge and floor opening
Commercial auto
ElevatedPickups, crew trucks and flatbeds run between yard and sites daily, and lowboys move cranes and lifts to remote plants.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Crews driving long distances home after extended shutdown shifts
- Lowboy moves of cranes and lifts without permits or escorts
- Driver qualification files and periodic driving record checks
- Oversize moves given to specialized carriers, permitted and escorted
Crime and theft
ModerateCopper, cable, tools and fuel leave open sites, and large progress payments and subcontractor invoices invite payment fraud.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Supplier or subcontractor bank details changed by email
- Copper and cable reels left on unfenced sites
- Call-back to a known number before any bank detail change
- Locked containers, site cameras and serial-numbered tool inventories
Inland marine and equipment
HighCranes, lifts and welders work on site, and installed process equipment stays at the contractor's risk until the owner accepts it.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Owner-supplied machinery received and stored in the contractor's care
- Owned cranes and lifts working near capacity on unproven ground
- Project values above the installation or builder's risk limit
- Limits set to the largest project, including owner-supplied equipment
- Crane inspections, lift plans and ground-bearing checks documented
- Equipment schedule kept current, including rented machines
Environmental
ElevatedOlder plants hide asbestos, lead and contaminated soil, and excavation, spills and process residues lead to cleanup claims.
Pollution on or from the site or the work.
- Renovation or demolition in older plants without a hazardous materials survey
- Excavation on former industrial land with unknown fill
- Process lines opened before draining and purging are confirmed
- Pre-construction surveys for asbestos, lead and soil contamination
- Line-break permits with draining and purging confirmed by the owner
- Contained fueling, spill kits and a stormwater plan on every site
Cyber and data
ElevatedRansomware on project and payroll systems stalls billing, and commissioning connects crews' laptops to owners' plant control networks.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Owners' plant drawings and control settings held on shared drives
- Field laptops plugged into plant control systems during start-up
- Multi-factor login and offline backups for project and payroll systems
- Dedicated, scanned laptops for commissioning on owners' networks
Professional liability
ElevatedDesign-build and fee-based construction management make the firm answer for design, coordination and schedule errors, not just workmanship.
Loss or injury caused by advice, design, testing, care or another professional service.
- Design done by in-house staff rather than outside engineers
- Construction management with cost or schedule guarantees
- Design subcontracted to engineers carrying their own professional cover
- Design liability capped in the owner contract
Umbrella and excess
SevereA fire, explosion or collapse inside an operating plant can kill plant staff and other trades and stop production for months.
How likely one liability event is to exhaust primary limits.
- Work in chemical, refinery, food or energy plants with hazardous processes
- Owner contracts demanding high limits and broad indemnity
- Project-specific limits or a wrap-up program on the largest jobs
- Hazard review with the owner before any work near live processes
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- The contractor's own site is an office with a steel or masonry shop and yard; the plants it builds range from tilt-up and steel frame to open process structures.
- Occupancy
- Welding, cutting and painting in the shop, with fuel, gas cylinders, formwork and cable reels in the yard; on site, hot work beside live processes.
- Protection
- A well-run shop separates hot work from paint and fuel, with extinguishers, monitored alarms, and a fenced, lit yard with cameras over equipment and copper.
- Exposure
- Yards sit in industrial districts beside other plants and contractors; job sites add the owner's flammable stock, live process units and neighbors within reach of sparks.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: work performed
On site: job sites
On site: shop, yard and equipment
On site: subcontractors and records
Refer or decline if you find
- Hot work inside operating plants without permits or post-work fire watch
- Owner contracts accepting the owner's own negligence or lost production
- Critical lifts over live process equipment with no written plan
- Subcontractors mobilized without certificates or safety prequalification
- Any prior fire, explosion or collapse on a project
How UrbanStat data helps.
Each project carries its own exposure. Open steel and roof decks fail in high wind before they are braced, plant sites beside rivers and ports flood, and seismic areas raise foundation and bracing demands.
- Wind, hurricane and flood scores at each plant address show how exposed open steel, roof decks and stored equipment are before builder's risk terms are set.
- Portfolio exposure seen street by street shows when several insured projects and owner plants cluster in one industrial corridor, with alerts once accumulated values pass a set threshold.
- Parcel and permit data give an existing plant's construction date and permit history, a quick screen for asbestos and past alterations before renovation work is priced.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
1.9 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.
0.8 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Nonresidential building construction (NAICS 2362), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
14 fatal work injuries in 2024, most often from transportation incidents (6).
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Industrial Building Construction (NAICS 23621), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
346 citations from 146 inspections; 65% were classed serious, willful or repeat.
- 1926.501 Duty to have fall protection26
- 1926.451 General requirements (scaffolds)13
- 1926.453 Aerial lifts12
- 1910.1200 Hazard communication12
- 1926.503 Training requirements (fall protection)12
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Industrial Building Construction (NAICS 236210). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
2 facilities reported toxic chemical releases totaling 108 pounds on and off site.
- Chromium and chromium compounds47
- Nickel and nickel compounds38
- Manganese and manganese compounds21
Chemicals released in the largest amounts, in pounds. 2 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Oil and Gas Pipeline and Related Structures Construction (NAICS 237120). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Builder's risk and installation
- Plant under construction and owner-supplied machinery stay at risk from fire, wind and testing failures until the owner accepts them.
- Contractors' pollution liability
- Disturbed asbestos, spilled process residues and contaminated soil on plant sites fall under general liability pollution exclusions.
- Riggers' liability
- Lifting and setting owners' machinery puts high-value property in the contractor's care, which general liability excludes.
- Contract surety bonds
- Owners require performance and payment bonds, and bonding capacity limits how much work the contractor can take on.
NAICS and SIC codes for industrial building contractors
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 236210 | Industrial Building Construction |
| NAICS 2022 | 237120 | Oil and Gas Pipeline and Related Structures Construction |
| NAICS 2022 | 237130 | Power and Communication Line and Related Structures Construction |
| NAICS 2022 | 237110 | Water and Sewer Line and Related Structures Construction |
| SIC 1987, primary | 1541 | General Contractors Industrial Buildings and Warehouses |
| SIC 1987 | 1629 | Heavy Construction, NEC |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.