Engine and turbine manufacturers
Engine and turbine manufacturers machine, assemble and test diesel, gas and marine engines, outboard motors, and steam, gas, water and wind turbines. Every unit runs on fuel or under load before it ships, key parts are costly and slow to replace, and a failure in service can stop a power plant, ship or locomotive.
Where losses come from.
- 01
Fires and explosions in fuel-fed test cells, oil-flooded machining and composite blade molding
- 02
Long shutdowns when unique machine tools, test cells or sole-source castings and forgings are lost
- 03
Engine and turbine failures that disable ships, power plants or generators, with large consequential claims
- PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
- Engines are being built for natural gas, hydrogen blends and hybrid drives, bringing new fuels into test cells with different leak and explosion hazards.
- Wind turbines keep growing taller with longer blades, which makes transport harder and spreads any design defect across larger, costlier fleets.
- Demand for backup power at data centers and hospitals fills order books, adding tight delivery penalties and failure-to-start claims to contracts.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
HighTest cells burn diesel and gas beside hot exhausts, superalloy grinding throws metal fines, and blade molds use large volumes of resin.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Test cells with fuel lines near exhausts and no automatic fuel shut-off
- Titanium or nickel alloy fines gathered in dry dust collectors
- Blade molding halls storing resin, balsa and foam cores in bulk
- Fixed suppression and gas detection in test cells, interlocked with fuel supply
- Wet collectors and housekeeping routines for combustible metal dust
- Sprinklers and separated storage for resins, cores and finished blades
Business interruption
HighLarge boring mills, balancing machines, test cells and blade molds take a year or more to replace, and castings come from few sources.
How long and how costly a shutdown is.
- Single-crystal castings or large forgings from one qualified supplier
- One test cell or balancing machine that every unit must pass through
- Delivery contracts with liquidated damages for late units
- Qualified second sources and safety stock for long-lead castings and forgings
- Recovery plan naming outside test facilities and machining partners
Premises liability
ModerateThe plant sees few visitors, but field crews overhaul engines and turbines inside customers' power plants, ships and wind farms.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Field crews lifting rotors or nacelle parts over customers' equipment
- Customer witness tests with visitors inside test areas
- Written lift plans and permits for every field overhaul
- Witness viewing behind barriers outside the test cell
Products and completed work
HighEngines and turbines drive ships, locomotives, standby generators and power plants, so one failure brings collisions, blackouts, injuries and large consequential losses.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Marine propulsion or standby power for hospitals and data centers
- Serial defects in blades, bearings or fuel systems across a fleet
- Uncapped performance or availability guarantees in sale contracts
- Critical parts traced to material lot, process and inspection records
- Fleet monitoring data reviewed for early signs of serial defects
- Contract caps on consequential loss and liquidated damages
Workers’ injury
ElevatedHeavy blocks, rotors and nacelles are lifted and rigged daily, with noise, fuel and resin exposures in test and molding areas.
Injuries and illness to employees.
- Tandem crane lifts of rotors and casings with informal rigging
- Workers inside large blade molds handling resin and glass fiber
- Test cell staff exposed to noise, exhaust and hot surfaces
- Certified crane operators and engineered lift plans for heavy components
- Respiratory protection and skin care where resins and fibers are handled
- Interlocked test cell and spin pit doors, and hearing conservation for test staff
Commercial auto
ModerateSpecialist haulers move most units; the insured runs field service trucks, parts vans and sales vehicles.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Own staff hauling oversized engines or blades under permit
- Contract heavy haulers with route surveys, escorts and proof of insurance
Crime and theft
ModerateNickel, cobalt and titanium alloy scrap is worth stealing, and spare parts resell easily through informal service and repair channels.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Superalloy scrap sold without weight and grade reconciliation
- Spare parts and returned cores shipped without serial number checks
- Segregated, weighed scrap sales paid to the company account
- Serialized spares stock with counts reconciled to orders and returns
Inland marine and equipment
ElevatedEach unit or blade in transit or overhaul is worth a great deal, though sale terms often pass transit risk to buyers.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Customers' engines and turbines held in the shop for overhaul
- Oversized blades and rotors moved by road, rail and sea
- Units stored at project sites before installation and acceptance
- Bailee and transit limits matched to the largest unit handled
- Engineered cradles, lashing plans and shock recorders on major shipments
Environmental
ElevatedFuel and lubricating oil tanks, test cell exhaust, coolants, resin waste and coating powders create spills, emissions and hazardous waste.
Pollution on or from the site or the work.
- Underground or undiked fuel tanks feeding test cells
- Styrene or epoxy waste from blade molding stored outdoors
- Diked fuel storage with leak detection and overfill alarms
- Licensed disposal of resin, coolant and oily waste
Cyber and data
ElevatedEngine controls and remote fleet monitoring connect to customers' assets, and export-controlled designs and networked machining draw ransomware.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Remote access into customers' turbines or engine control systems
- Design and machining data on networks shared with offices
- Segmented monitoring platforms with multi-factor access for staff and customers
- Offline backups of design, machining and test data
Professional liability
ModerateApplication engineering, generator sizing and monitoring-based maintenance advice cause outages when wrong, though most liability runs through product contracts.
Loss or injury caused by advice, design, testing, care or another professional service.
- Long-term service agreements with availability guarantees
- Written scope and liability caps on advisory and monitoring services
Umbrella and excess
HighA propulsion failure, turbine blade release or standby power failure during an emergency can cause deaths and losses beyond primary limits.
How likely one liability event is to exhaust primary limits.
- Engines for passenger vessels, ferries or locomotives
- Wind turbines installed near roads, homes or public areas
- Long-established makers facing legacy asbestos gasket or insulation claims
- Design reviews for overspeed, containment and fail-safe shutdown
- Field bulletins tracked to each serial number and current operator
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- High-bay steel-frame halls with heavy cranes, deep machine foundations and pits, test cells built as separate concrete enclosures, and long-span halls for blades.
- Occupancy
- Oil-flooded machining, superalloy grinding, heat treatment and coating, fuel-fed engine and turbine testing, and resin infusion of composite blades.
- Protection
- Sprinklers throughout, fixed suppression and gas detection in test cells, automatic fuel shut-off, combustible metal dust controls, and monitored alarms and security.
- Exposure
- Bulk fuel tanks and outdoor storage of blades, nacelles and crated units fill the yard, often near ports or rail sidings shared with other heavy industry.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: products and contracts
On site: test cells and processes
On site: lifting and people
On site: site and shipping
Refer or decline if you find
- Test cells with no fixed suppression or automatic fuel shut-off
- Combustible metal fines collected in dry, unprotected collectors
- Uncapped consequential loss or availability guarantees in sale contracts
- No serial traceability for blades, rotors or crankshafts
- Repeated fleet failures with no root cause analysis or bulletin
How UrbanStat data helps.
Plants that build large units sit near ports and rivers for shipping, exposing pits, test cells and yard-stored blades to flood and surge. Earthquake misaligns heavy machine tools, and tornado damages long-span halls.
- Flood and storm surge scores at the address show whether machine pits, test cells and yard-stored blades at port-side plants lie in water's path.
- Live hurricane tracks and surge overlays show which plants, yards and staged units sit in the path while a storm approaches.
- Parcel and permit data give construction dates and permit history, a quick check on when test cells or blade halls were built or extended.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
1.9 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.
0.3 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Other engine equipment manufacturing (NAICS 333618). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
3 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Engine, Turbine, and Power Transmission Equipment Manufacturing (NAICS 33361), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
18 citations from 9 inspections; 61% were classed serious, willful or repeat.
- 1910.147 The control of hazardous energy (lockout/tagout)5
- 1910.212 General requirements for all machines3
- 1910.37 Maintenance, safeguards, and operational features for exit routes2
- 1910.95 Occupational noise exposure1
- 1910.178 Powered industrial trucks1
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Other Engine Equipment Manufacturing (NAICS 333618). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
35 facilities reported toxic chemical releases totaling 346,397 pounds on and off site.
- Nitrate compounds233,609
- Manganese22,957
- Chromium22,609
Chemicals released in the largest amounts, in pounds. 18 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Other Engine Equipment Manufacturing (NAICS 333618). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Equipment breakdown
- Test cell dynamometers, large machining centers and balancing machines fail mechanically and take months to replace.
- Product recall
- Fleet-wide retrofits of blades, bearings or fuel systems are costly even when nobody is hurt.
- Contingent business interruption
- A fire at a casting or forging supplier stops engine and turbine assembly for months.
- Ocean cargo
- Large units and blades move by sea to export customers and project sites under varied sale terms.
- Ship repairer's liability
- Field crews servicing engines aboard vessels need cover for the vessel in their care.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.