Construction, mining and lifting equipment manufacturers

These manufacturers fabricate, machine, paint and assemble excavators, loaders, cranes, hoists, aerial lifts, forklifts, mining machines and drilling rigs. Each machine is heavy, powerful and costly, so one tip-over, boom failure or runaway at a job site, mine or warehouse, or one damaged unit in transit, makes a large claim.

Manufacturing · NAICS 333120 · SIC 3531 · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Operators and bystanders crushed, struck or dropped when machines tip, fail or move unexpectedly

  2. 02

    Welding, crane and press injuries while handling very heavy fabrications

  3. 03

    Supply chain or paint line stoppages that halt assembly of high-value machines

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Battery-electric excavators, loaders and forklifts bring lithium-ion packs into assembly halls and test areas, adding thermal runaway risk to fire and storage planning.
  • Remote-control and autonomous machines in mines, warehouses and job sites shift product claims toward software, sensors and the maker's own updates.
  • Rental fleets own a growing share of machines, so makers face more indemnity demands and claims from users with little training on a given model.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Elevated
Robotic welding, thermal cutting, hydraulic oil under pressure and paint booths operate in large, mostly noncombustible assembly halls.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Hydraulic test benches near welding or grinding sparks
  • Paint booths sized for whole machines with solvent-based coatings
  • Diesel filling and engine run-up inside the building
Controls that matter
  • Sprinklers throughout, including paint booths and oil storage rooms
  • Automatic shut-off on hydraulic test rigs when pressure drops
  • Hot work permits outside fixed weld cells

Business interruption

High
Large machining centers, weld robots and the paint line take many months to replace, and engines and hydraulics come from few suppliers.

How long and how costly a shutdown is.

Watch for
  • Single-source engines, pumps, axles or control electronics
  • One boring mill or paint line that all frames pass through
  • Customers with penalty clauses for late delivery
Controls that matter
  • Dual sourcing or safety stock for critical components
  • Mapped alternatives for machining and coating at sister or contract plants

Premises liability

Moderate
Proving grounds, dealer training and customer demonstrations put visitors near moving machines weighing many tons.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Customers operating machines on the demonstration ground
  • Trade show stands with raised booms and buckets
Controls that matter
  • Fenced proving ground with spotters and exclusion zones
  • Company operators only, unless visitors are qualified and briefed

Products and completed work

High
Rollovers, boom and outrigger failures, blind-spot run-overs and unintended movement cause fatal injuries, and machines work for decades under many owners.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Cranes, hoists, aerial lifts and forklifts, where a structural failure drops loads or people
  • Remote-control or autonomous operation added to existing models
  • Attachments and quick couplers from other makers fitted to the machines
Controls that matter
  • Rollover and falling-object cabs, cameras and alarms fitted as standard
  • Weld procedures qualified and structural welds tested on load-bearing parts
  • Service bulletins tracked to each serial number and current owner

Workers’ injury

High
Heavy plate, large weldments and suspended loads cause crush injuries, strains, burns and falls from machines during assembly.

Injuries and illness to employees.

Watch for
  • Work at height on booms and cabs without platforms
  • Tandem crane lifts of frames with informal rigging
  • Welders working inside enclosed frames and tanks
Controls that matter
  • Fixed access platforms and fall protection at assembly stations
  • Certified crane operators and planned lifts for heavy components
  • Fume extraction and confined-space procedures for welding

Commercial auto

Moderate
Contract heavy haulers move most machines; the company runs service trucks, parts vans and sales cars.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Own lowboys carrying overweight or over-width loads
  • Field technicians driving crane-equipped service trucks
Controls that matter
  • Qualified heavy-haul drivers with route permits and escorts
  • Telematics and inspection routines for service trucks

Crime and theft

Moderate
Whole machines are occasionally stolen from yards, and engines, electronic controllers and copper are targeted more often.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Finished machines parked with common keys left in cabs
  • Scrap metal sales with no truck scale reconciliation
Controls that matter
  • Immobilizers and tracking units activated before machines leave assembly
  • Fenced yard, gate control and camera coverage

Inland marine and equipment

Elevated
Finished machines travel by road, rail and ship and stand at shows and demonstration sites, though haulers and buyers often carry the transit risk.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Loading and unloading done by the insured's own staff
  • Machines on consignment or rental trial before title passes
  • Export shipments with unclear terms on who bears transit risk
Controls that matter
  • Transit and off-site limits matched to the largest shipment
  • Written lashing and loading procedures for each model
  • Sale terms that state exactly where risk transfers

Environmental

Elevated
Paint solvents, pretreatment chemicals, hydraulic oil, diesel and coolants are stored in bulk, and proving grounds see leaks and spills.

Pollution on or from the site or the work.

Watch for
  • Underground fuel tanks and old oil-water separators
  • Unpaved test areas with stained soil
Controls that matter
  • Diked bulk oil and fuel storage with overfill alarms
  • Spill kits and drip trays at test and filling points

Cyber and data

Elevated
Telematics, remote diagnostics and remote or autonomous control link machines in the field to the maker's network, alongside robotic production.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Fleet telematics platforms holding customer and machine location data
  • Remote-control or autonomous haulage accepting commands over the air
  • Weld robots and machining centers on the office network
Controls that matter
  • Signed firmware and security testing of machine control units
  • Production controls segmented from business systems, with offline backups
  • Multi-factor access for dealers and service staff to diagnostic tools

Professional liability

Moderate
Application engineering, load charts and custom designs for mines or rigs can be wrong, though most resulting claims arrive as products.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Custom-engineered mining or drilling systems with performance guarantees
  • Lift planning software or site surveys supplied to customers
Controls that matter
  • Engineering checked and signed off by a second qualified engineer
  • Contract limits on consequential loss and performance shortfalls

Umbrella and excess

High
A crane collapse, aerial lift tip-over, haul truck run-over or failed wellhead can kill several people, with verdicts far above primary limits.

How likely one liability event is to exhaust primary limits.

Watch for
  • Cranes working over public streets and occupied buildings
  • Large mining machines and forklifts working among people on foot
  • Wellhead, blowout-prevention or drilling equipment, where failure releases oil and gas
Controls that matter
  • Load-moment limiters, tilt alarms and proximity detection fitted as standard
  • Layered limits sized to units in service and their worst use
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Very large steel-frame assembly halls with wide-span metal roofs, crane runways, floor pits for machining and testing, and paved yards for finished machines.
Occupancy
Thermal cutting, robotic welding, heavy machining, paint booths sized for whole machines, hydraulic test rigs, diesel filling and engine run-up.
Protection
Sprinklers throughout including booths and oil rooms, shut-offs on hydraulic test rigs, hot work permits, diked fuel storage, and fenced, lit yards with gate control and cameras.
Exposure
Usually large industrial sites near highways or rail, with suppliers' plants nearby; outdoor stock and proving grounds add wind, hail and grass fire exposure.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: products and design

On site: plant and protection

On site: supply, transit and yard

On site: quality and environment

Refer or decline if you find

  • Lifting machines sold without load-moment or overload protection
  • No system to trace machines to current owners
  • Structural welding with no procedure qualification or testing records
  • Unsprinklered paint booth large enough for whole machines
05 / Location

How UrbanStat data helps.

High values concentrate in one assembly hall and the yard beside it. Tornado or wind damage to a wide-span roof stops production for months, hail marks finished cabs and paint, and flood ruins machining centers set in floor pits.

TornadoHailWindFloodEarthquake
  • Tornado, wind and hail scores at the address inform roof and yard terms for an assembly hall with finished machines parked outside.
  • Street-by-street exposure views show how much insured value sits in the plant, its yard and nearby suppliers, with alerts when the total passes a set limit.
  • Flood scores for the site show whether pit-mounted machining centers and paint line equipment are exposed, before interruption cover is priced.
Tornado · Hail · Wind · Flood
06 / Public loss data

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

2.8 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Construction machinery manufacturing
2.8
All private industry
2.3

0.8 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Construction machinery manufacturing (NAICS 33312), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

4 fatal work injuries in 2024.

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Agriculture, Construction, and Mining Machinery Manufacturing (NAICS 3331), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

132 citations from 44 inspections; 76% were classed serious, willful or repeat.

  • 1910.134 Respiratory protection
    12
  • 1910.212 General requirements for all machines
    10
  • 1910.147 The control of hazardous energy (lockout/tagout)
    10
  • 1910.107 Spray finishing using flammable and combustible materials
    7
  • 1910.1200 Hazard communication
    6

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Construction Machinery Manufacturing (NAICS 333120). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

65 facilities reported toxic chemical releases totaling 1.1 million pounds on and off site.

  • Manganese
    490,124
  • Chromium
    311,689
  • Nickel
    163,169

Chemicals released in the largest amounts, in pounds. 32 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Construction Machinery Manufacturing (NAICS 333120). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Product recall
Retrofitting booms, brakes or control software on machines spread across many owners and regions is slow and costly.
Contingent business interruption
A fire or flood at the engine, hydraulics or electronics supplier halts assembly of every model.
Equipment breakdown
Large boring mills, weld robots and paint ovens fail mechanically and take months to replace.
Ocean cargo
Machines shipped for export often travel as deck cargo, where weather and handling damage are common.
Classification
SystemCodeIndustry
NAICS 2022, primary333120Construction Machinery Manufacturing
NAICS 2022333131Mining Machinery and Equipment Manufacturing
NAICS 2022333923Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
NAICS 2022333924Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing
NAICS 2022333132Oil and Gas Field Machinery and Equipment Manufacturing
SIC 1987, primary3531Construction Machinery and Equipment
SIC 19873532Mining Machinery and Equipment, Except Oil and Gas Field Machinery and Equipment
SIC 19873536Overhead Traveling Cranes, Hoists, and Monorail Systems
SIC 19873537Industrial Trucks, Tractors, Trailers, and Stackers
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →