---
title: "Engine and turbine manufacturers: Industry Risk Guide"
description: "Engine and turbine manufacturers machine, assemble and test diesel, gas and marine engines, outboard motors, and steam, gas, water and wind turbines. Every…"
url: https://www.urbanstat.com/industry-risk-guides/engine-and-turbine-manufacturers/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Engine and turbine manufacturers

Engine and turbine manufacturers machine, assemble and test diesel, gas and marine engines, outboard motors, and steam, gas, water and wind turbines. Every unit runs on fuel or under load before it ships, key parts are costly and slow to replace, and a failure in service can stop a power plant, ship or locomotive.

Manufacturing · NAICS 333618 · SIC 3519 · Updated November 2026

Risk profile

1. [Property High](#line-property)
2. [Business interruption High](#line-bi)
3. [Premises liability Moderate](#line-gl)
4. [Products and completed work High](#line-products)
5. [Workers’ injury Elevated](#line-wc)
6. [Commercial auto Moderate](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental Elevated](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Moderate](#line-prof)
12. [Umbrella and excess High](#line-umbrella)

**Property.** Test cells burn diesel and gas beside hot exhausts, superalloy grinding throws metal fines, and blade molds use large volumes of resin.

Loss drivers

## Where losses come from.

1. Fires and explosions in fuel-fed test cells, oil-flooded machining and composite blade molding
2. Long shutdowns when unique machine tools, test cells or sole-source castings and forgings are lost
3. Engine and turbine failures that disable ships, power plants or generators, with large consequential claims

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Engine and turbine manufacturers
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: High, 4 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Engines are being built for natural gas, hydrogen blends and hybrid drives, bringing new fuels into test cells with different leak and explosion hazards.
- Wind turbines keep growing taller with longer blades, which makes transport harder and spreads any design defect across larger, costlier fleets.
- Demand for backup power at data centers and hospitals fills order books, adding tight delivery penalties and failure-to-start claims to contracts.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: High (4 of 5)

Test cells burn diesel and gas beside hot exhausts, superalloy grinding throws metal fines, and blade molds use large volumes of resin.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Test cells with fuel lines near exhausts and no automatic fuel shut-off
- Titanium or nickel alloy fines gathered in dry dust collectors
- Blade molding halls storing resin, balsa and foam cores in bulk

**Controls that matter**

- Fixed suppression and gas detection in test cells, interlocked with fuel supply
- Wet collectors and housekeeping routines for combustible metal dust
- Sprinklers and separated storage for resins, cores and finished blades

### Business interruption: High (4 of 5)

Large boring mills, balancing machines, test cells and blade molds take a year or more to replace, and castings come from few sources.

Covers: How long and how costly a shutdown is.

**Watch for**

- Single-crystal castings or large forgings from one qualified supplier
- One test cell or balancing machine that every unit must pass through
- Delivery contracts with liquidated damages for late units

**Controls that matter**

- Qualified second sources and safety stock for long-lead castings and forgings
- Recovery plan naming outside test facilities and machining partners

### Premises liability: Moderate (2 of 5)

The plant sees few visitors, but field crews overhaul engines and turbines inside customers' power plants, ships and wind farms.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Field crews lifting rotors or nacelle parts over customers' equipment
- Customer witness tests with visitors inside test areas

**Controls that matter**

- Written lift plans and permits for every field overhaul
- Witness viewing behind barriers outside the test cell

### Products and completed work: High (4 of 5)

Engines and turbines drive ships, locomotives, standby generators and power plants, so one failure brings collisions, blackouts, injuries and large consequential losses.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Marine propulsion or standby power for hospitals and data centers
- Serial defects in blades, bearings or fuel systems across a fleet
- Uncapped performance or availability guarantees in sale contracts

**Controls that matter**

- Critical parts traced to material lot, process and inspection records
- Fleet monitoring data reviewed for early signs of serial defects
- Contract caps on consequential loss and liquidated damages

### Workers’ injury: Elevated (3 of 5)

Heavy blocks, rotors and nacelles are lifted and rigged daily, with noise, fuel and resin exposures in test and molding areas.

Covers: Injuries and illness to employees.

**Watch for**

- Tandem crane lifts of rotors and casings with informal rigging
- Workers inside large blade molds handling resin and glass fiber
- Test cell staff exposed to noise, exhaust and hot surfaces

**Controls that matter**

- Certified crane operators and engineered lift plans for heavy components
- Respiratory protection and skin care where resins and fibers are handled
- Interlocked test cell and spin pit doors, and hearing conservation for test staff

### Commercial auto: Moderate (2 of 5)

Specialist haulers move most units; the insured runs field service trucks, parts vans and sales vehicles.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Own staff hauling oversized engines or blades under permit

**Controls that matter**

- Contract heavy haulers with route surveys, escorts and proof of insurance

### Crime and theft: Moderate (2 of 5)

Nickel, cobalt and titanium alloy scrap is worth stealing, and spare parts resell easily through informal service and repair channels.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Superalloy scrap sold without weight and grade reconciliation
- Spare parts and returned cores shipped without serial number checks

**Controls that matter**

- Segregated, weighed scrap sales paid to the company account
- Serialized spares stock with counts reconciled to orders and returns

### Inland marine and equipment: Elevated (3 of 5)

Each unit or blade in transit or overhaul is worth a great deal, though sale terms often pass transit risk to buyers.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Customers' engines and turbines held in the shop for overhaul
- Oversized blades and rotors moved by road, rail and sea
- Units stored at project sites before installation and acceptance

**Controls that matter**

- Bailee and transit limits matched to the largest unit handled
- Engineered cradles, lashing plans and shock recorders on major shipments

### Environmental: Elevated (3 of 5)

Fuel and lubricating oil tanks, test cell exhaust, coolants, resin waste and coating powders create spills, emissions and hazardous waste.

Covers: Pollution on or from the site or the work.

**Watch for**

- Underground or undiked fuel tanks feeding test cells
- Styrene or epoxy waste from blade molding stored outdoors

**Controls that matter**

- Diked fuel storage with leak detection and overfill alarms
- Licensed disposal of resin, coolant and oily waste

### Cyber and data: Elevated (3 of 5)

Engine controls and remote fleet monitoring connect to customers' assets, and export-controlled designs and networked machining draw ransomware.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Remote access into customers' turbines or engine control systems
- Design and machining data on networks shared with offices

**Controls that matter**

- Segmented monitoring platforms with multi-factor access for staff and customers
- Offline backups of design, machining and test data

### Professional liability: Moderate (2 of 5)

Application engineering, generator sizing and monitoring-based maintenance advice cause outages when wrong, though most liability runs through product contracts.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Long-term service agreements with availability guarantees

**Controls that matter**

- Written scope and liability caps on advisory and monitoring services

### Umbrella and excess: High (4 of 5)

A propulsion failure, turbine blade release or standby power failure during an emergency can cause deaths and losses beyond primary limits.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Engines for passenger vessels, ferries or locomotives
- Wind turbines installed near roads, homes or public areas
- Long-established makers facing legacy asbestos gasket or insulation claims

**Controls that matter**

- Design reviews for overspeed, containment and fail-safe shutdown
- Field bulletins tracked to each serial number and current operator

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: High-bay steel-frame halls with heavy cranes, deep machine foundations and pits, test cells built as separate concrete enclosures, and long-span halls for blades.
- **Occupancy**: Oil-flooded machining, superalloy grinding, heat treatment and coating, fuel-fed engine and turbine testing, and resin infusion of composite blades.
- **Protection**: Sprinklers throughout, fixed suppression and gas detection in test cells, automatic fuel shut-off, combustible metal dust controls, and monitored alarms and security.
- **Exposure**: Bulk fuel tanks and outdoor storage of blades, nacelles and crated units fill the yard, often near ports or rail sidings shared with other heavy industry.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- Which products are made: diesel, gas or marine engines, outboard motors, or steam, gas, water or wind turbines?
- What are the main end uses, and what share goes to marine, rail, standby power or utilities?
- Does the insured overhaul customers' units or sell field service and long-term service agreements?
- Which castings, forgings and controls are sole-sourced, and what are their lead times?
- What fleet-wide failures, recalls or warranty campaigns have occurred, and how were they settled?

### Documents to request

- Loss runs including product and warranty claims history
- Test cell fire protection and gas detection service reports
- Standard sale terms and service agreement liability clauses
- Supplier list showing sole-source castings, forgings and controls

### On site: products and contracts

- Which units are assembled here, and which are only tested or packaged?
- How are critical parts traced from material lot to a shipped serial number?
- How are field failures reviewed, and who decides on service bulletins?

### On site: test cells and processes

- How are test cells fueled, ventilated and protected, and what shuts the fuel off?
- Where are titanium and nickel alloy fines collected, and how are collectors protected?
- How are resins, cores and finished blades stored and separated?
- How are spin pits and balancing bunkers built to contain a rotor burst?
- Which machine, cell or mold would halt output longest if lost?

### On site: lifting and people

- How are rotors, blocks and casings lifted, and who plans the lifts?
- Which noise, exhaust and resin exposures are monitored, and how?

### On site: site and shipping

- How are oversized units and blades loaded, secured and stored outdoors?
- What does the loss history show for test cell fires and transit damage?

### Refer or decline if you find

- Test cells with no fixed suppression or automatic fuel shut-off
- Combustible metal fines collected in dry, unprotected collectors
- Uncapped consequential loss or availability guarantees in sale contracts
- No serial traceability for blades, rotors or crankshafts
- Repeated fleet failures with no root cause analysis or bulletin

Location

## How UrbanStat data helps.

Plants that build large units sit near ports and rivers for shipping, exposing pits, test cells and yard-stored blades to flood and surge. Earthquake misaligns heavy machine tools, and tornado damages long-span halls.

Flood · Hurricane · Storm surge · Earthquake · Tornado

- Flood and storm surge scores at the address show whether machine pits, test cells and yard-stored blades at port-side plants lie in water's path.
- Live hurricane tracks and surge overlays show which plants, yards and staged units sit in the path while a storm approaches.
- Parcel and permit data give construction dates and permit history, a quick check on when test cells or blade halls were built or extended.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Hurricane · Storm surge · Earthquake

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**1.9** recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Other engine equipment manufacturing

**1.9**

All private industry

**2.3**

0.3 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Other engine equipment manufacturing (NAICS 333618). Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**3** fatal work injuries in 2024.

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Engine, Turbine, and Power Transmission Equipment Manufacturing (NAICS 33361), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**18** citations from 9 inspections; 61% were classed serious, willful or repeat.

- 1910.147 The control of hazardous energy (lockout/tagout) **5**
- 1910.212 General requirements for all machines **3**
- 1910.37 Maintenance, safeguards, and operational features for exit routes **2**
- 1910.95 Occupational noise exposure **1**
- 1910.178 Powered industrial trucks **1**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Other Engine Equipment Manufacturing (NAICS 333618). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**35** facilities reported toxic chemical releases totaling **346,397 pounds** on and off site.

- Nitrate compounds **233,609**
- Manganese **22,957**
- Chromium **22,609**

Chemicals released in the largest amounts, in pounds. 18 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Other Engine Equipment Manufacturing (NAICS 333618). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Equipment breakdown**: Test cell dynamometers, large machining centers and balancing machines fail mechanically and take months to replace.
- **Product recall**: Fleet-wide retrofits of blades, bearings or fuel systems are costly even when nobody is hurt.
- **Contingent business interruption**: A fire at a casting or forging supplier stops engine and turbine assembly for months.
- **Ocean cargo**: Large units and blades move by sea to export customers and project sites under varied sale terms.
- **Ship repairer's liability**: Field crews servicing engines aboard vessels need cover for the vessel in their care.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [333618](https://www.urbanstat.com/industry-risk-guides/naics/?q=333618) | Other Engine Equipment Manufacturing |
| NAICS 2022 | [333611](https://www.urbanstat.com/industry-risk-guides/naics/?q=333611) | Turbine and Turbine Generator Set Units Manufacturing |
| SIC 1987, primary | [3519](https://www.urbanstat.com/industry-risk-guides/sic/?q=3519) | Internal Combustion Engines, NEC |
| SIC 1987 | [3511](https://www.urbanstat.com/industry-risk-guides/sic/?q=3511) | Steam, Gas, and Hydraulic Turbines, and Turbine Generator Set Units |

**Related business types**

- [Gear, bearing and power transmission manufacturers](https://www.urbanstat.com/industry-risk-guides/gear-bearing-and-power-transmission-manufacturers/)
- [Aircraft and aerospace parts manufacturers](https://www.urbanstat.com/industry-risk-guides/aircraft-and-aerospace-parts-manufacturers/)
- [Construction, mining and lifting equipment manufacturers](https://www.urbanstat.com/industry-risk-guides/construction-mining-and-lifting-equipment-manufacturers/)
- [Foundries](https://www.urbanstat.com/industry-risk-guides/foundries/)
- [Wind farms](https://www.urbanstat.com/industry-risk-guides/wind-farms/)
- [Compare Engine and turbine manufacturers with Gear, bearing and power transmission manufacturers](https://www.urbanstat.com/industry-risk-guides/compare/?a=engine-and-turbine-manufacturers&b=gear-bearing-and-power-transmission-manufacturers)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/engine-and-turbine-manufacturers/

- Page: Engine and turbine manufacturers: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/engine-and-turbine-manufacturers/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
