Aircraft and aerospace parts manufacturers
Aerospace manufacturers machine, form, bond and assemble airframe structures, engine parts, landing gear, avionics and space hardware to exacting specifications and certification rules. A part that fails in flight can bring down an aircraft, so products liability severity, traceability and long qualification cycles shape the account.
Where losses come from.
- 01
Parts failing in flight, causing crashes with many deaths and long, costly litigation
- 02
Fires and explosions from titanium and magnesium fines, composite autoclaves, solvents and rocket propellants
- 03
Damage to high-value parts, customer tooling and test articles in the plant or in transit
- PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Severe, 5 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: High, 4 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: Severe, 5 of 5; sector average 3.6; all business types 3.6.
- Drone, air taxi and commercial space programs bring new entrants with short track records, unproven designs and battery-powered propulsion into the supplier base.
- Additive manufacturing of titanium and nickel parts adds metal powder fire and explosion hazards and new questions about the fatigue life of printed parts.
- Larger jury awards and very long tails, with aircraft flying for decades, keep products limits and contract indemnities under steady pressure.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
HighTitanium and magnesium chips burn fiercely, autoclaves cure composites under heat and pressure, and high-value parts concentrate in a few buildings.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Titanium or magnesium machining with chips held in open bins
- Autoclaves and curing ovens without current pressure vessel inspections
- Solid rocket propellant or other energetic materials handled on site
- Class D agent at the machines and chips kept in covered steel containers
- Autoclave overpressure relief, temperature interlocks and scheduled inspection
- Separation distances and barricades for any energetic materials
Business interruption
HighLarge five-axis machines, autoclaves and test rigs are built to order, and customer approvals tie each part to this site.
How long and how costly a shutdown is.
- Sole-source parts on programs with no qualified second supplier
- Special processes approved only at this site
- Castings, forgings or chips from a small pool of suppliers
- Backup capacity agreed and qualified at a sister plant or partner
- Critical spares and service contracts for autoclaves and large machines
- Digital machine programs and tooling designs stored off site
Premises liability
ModerateVisitors are customer inspectors and pilots, while field teams work on aircraft at airports and customers' hangars near fuel and moving aircraft.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Field service teams working on aircraft at customers' sites
- Customer pilots, delivery crews and inspectors on the flight line
- Escorted visitor routes away from test cells and hazardous processes
- Written terms and airside training for every field service job
Products and completed work
SevereA cracked fitting, a mis-machined blade or faulty avionics can bring down an aircraft, killing passengers and people on the ground.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Flight-critical parts: rotating engine parts, landing gear, flight controls, fuel systems
- Parts sold into general aviation, helicopters or drones
- Repairs, overhauls and modifications returned to service under the insured's approval
- Traceability from material heat lot to serial number and installation
- First-article inspection and nondestructive testing on every critical feature
- Counterfeit-part controls and purchasing only from approved sources
Workers’ injury
ElevatedMachinists, laminators and assemblers face cuts, strains, riveting vibration, resin dermatitis and chromate primer exposure while working on and inside airframes.
Injuries and illness to employees.
- Work on wings and fuselages from stands without guardrails
- Sanding composites or chromate primers without extraction or respirators
- Confined fuel tank entry for sealing and inspection
- Fall protection on every work platform around airframes
- Local exhaust and air monitoring for composite dust and chromates
- Permit system and gas testing for fuel tank entry
Commercial auto
ModerateMost parts ship by carrier; large structures move with contracted heavy haulers, and staff drive between plants and airports.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Owned trucks moving oversize wing or fuselage sections
- Staff hand-carrying urgent parts to aircraft grounded at airports
- Contracted haulers with permits, escorts and their own cargo cover
- Driver record checks for anyone driving on company business
Crime and theft
ModerateAvionics, titanium and nickel alloy scrap and precision tooling have resale value, and fake parts can enter through purchasing fraud.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- High-value alloy scrap sold without weighing or reconciliation
- Supplier bank detail changes accepted by email
- Caged storage and inventory counts for avionics and alloy scrap
- Call-back checks before changing any supplier payment details
Inland marine and equipment
ElevatedEngines, assemblies and customer tooling worth a great deal travel to outside processors and customers, and test articles sit in the insured's care.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Single shipments of engines or assemblies with very high values
- Parts held at outside heat treaters, platers and testing labs
- Transit cover with per-shipment limits matched to actual values
- Register of customer tooling and parts held by outside processors
Environmental
ElevatedChromate primers, cadmium and chrome plating, chemical milling, legacy degreasing solvents and propellant residues are regulated and persistent.
Pollution on or from the site or the work.
- Plating or chemical milling lines with older tanks and floors
- Propellant or perchlorate handling with no groundwater history
- Diked tank lines with leak detection and licensed waste disposal
- Baseline soil and groundwater testing recorded for the site
Cyber and data
HighExport-controlled drawings, defense contract data and networked machine programs draw espionage and ransomware, and breaches bring contract penalties.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Controlled technical data on shared drives without access controls
- Machine programs loaded from removable media or open remote access
- Separate enclave for controlled data with multifactor authentication
- Segmented plant network and tested offline backups of programs
Professional liability
ModerateDesign-approval holders and repair stations certify parts as fit to fly, though injury claims from that work arrive as products.
Loss or injury caused by advice, design, testing, care or another professional service.
- Engineering, analysis or testing services sold to other manufacturers
- Documented design reviews and sign-off by authorized engineers
Umbrella and excess
SevereOne crash traced to a part can bring wrongful death claims from every passenger and people on the ground.
How likely one liability event is to exhaust primary limits.
- Parts on commercial passenger aircraft or rotorcraft
- Contracts accepting indemnity for the customer's own negligence
- Limits sized to a full passenger aircraft loss, not to sales
- Contract review that caps indemnity and requires customers' own cover
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Large high-bay noncombustible assembly halls and hangars with wide clear spans, plus older machining plants, clean rooms and test cells added over decades.
- Occupancy
- Five-axis machining of titanium and aluminum, chemical milling and plating, composite layup and autoclave curing, paint hangars, and engine or propulsion test cells using fuel.
- Protection
- Sprinklers throughout with foam or deluge in hangars and paint areas, special suppression for test cells and dust collectors, guarded access, and an on-site emergency team.
- Exposure
- Plants often sit at or beside airports and flight test ranges, where fuel farms, aircraft movements and neighbors' hangars add fire and impact exposure.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: production
On site: fire and process hazards
On site: people and security
On site: records
Refer or decline if you find
- Flight-critical parts made with incomplete traceability or missing inspection records
- Raw material or electronics bought from unapproved brokers
- Titanium or magnesium fines left in open bins or wet sludge piles
- Propellant or energetic material handled without separation distances
- Parts released on concession with no engineering sign-off
How UrbanStat data helps.
High-bay halls and hangars with wide roof spans take hail, tornado and wind damage, coastal assembly and launch sites face hurricanes, and some supplier clusters sit near active faults.
- Earthquake and hurricane scores at each plant address inform property and interruption terms for sites holding autoclaves and long-lead machines.
- Live hurricane tracks show which insured coastal assembly plants, hangars and launch-area sites sit in the path, so storm plans for aircraft and parts can be checked early.
- A risk analysis API returns location results in seconds, so peril checks on each new plant or outside processor run inside the quoting workflow.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
2.1 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.
0.7 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Other aircraft parts and auxiliary equipment manufacturing (NAICS 336413). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
4 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Other Aircraft Parts and Auxiliary Equipment Manufacturing (NAICS 336413). Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
160 citations from 38 inspections; 58% were classed serious, willful or repeat.
- 1910.1200 Hazard communication17
- 1910.147 The control of hazardous energy (lockout/tagout)15
- 1910.305 Wiring methods, components, and equipment for general use10
- 1910.212 General requirements for all machines9
- 1910.1026 Chromium (VI)7
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Other Aircraft Parts and Auxiliary Equipment Manufacturing (NAICS 336413). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
107 facilities reported toxic chemical releases totaling 803,246 pounds on and off site.
- Nitrate compounds200,652
- 1-bromopropane115,997
- Chromium compounds99,918
Chemicals released in the largest amounts, in pounds. 59 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Other Aircraft Parts and Auxiliary Equipment Manufacturing (NAICS 336413). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Aircraft products and grounding
- Standard liability forms exclude aircraft products, and grounding a fleet over a suspect part brings large loss-of-use claims.
- Product recall
- Inspecting and replacing suspect parts on aircraft in service costs far more than the parts themselves.
- Equipment breakdown
- Autoclaves, large machining centers and test rigs fail mechanically and stop production for long periods.
- Aircraft hull for flight test
- Builders and modifiers that fly prototypes or test aircraft need hull and liability cover written for flight testing.
- Hangarkeepers liability
- Customers' aircraft held for modification, completion or overhaul are excluded from general liability and need their own cover.
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 336413 | Other Aircraft Parts and Auxiliary Equipment Manufacturing |
| NAICS 2022 | 336411 | Aircraft Manufacturing |
| NAICS 2022 | 336412 | Aircraft Engine and Engine Parts Manufacturing |
| NAICS 2022 | 336414 | Guided Missile and Space Vehicle Manufacturing |
| NAICS 2022 | 336415 | Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing |
| NAICS 2022 | 336419 | Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing |
| NAICS 2022 | 334511 | Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing |
| SIC 1987, primary | 3728 | Aircraft Parts and Auxiliary Equipment, NEC |
| SIC 1987 | 3724 | Aircraft Engines and Engine Parts |
| SIC 1987 | 3721 | Aircraft |
| SIC 1987 | 3812 | Search, Detection, Navigation, Guidance, Aeronautical, and Nautical Systems and Instruments |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.