3D printing service bureausNAICS 326199 · SIC 3089
Service bureaus print prototypes and end-use parts to customers' files using polymer powder, resin, filament and metal powder machines, then depowder, cure, machine and finish them. Fine reactive metal powders and combustible polymer dust can ignite or explode, and printed parts increasingly go into products where a failure injures someone.
NAICS 326199 All Other Plastics Product ManufacturingSIC 3089 Plastics Products, NECNAICS 332710 Machine ShopsNAICS 332117 Powder Metallurgy Part Manufacturing+4 more codes
Where losses come from.
- 01
Fires and dust explosions from aluminum, titanium and polymer powders during depowdering, sieving and collection
- 02
Printed parts that fail in service after going into vehicles, aircraft, medical devices or machinery
- 03
Fires in print farms where dozens of heated printers run unattended overnight among plastic stock
- PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Low, 1 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Elevated, 3 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.
- Additive work is shifting from prototypes to certified production parts for aviation, medical and vehicle makers, raising product liability and recall severity.
- Cheaper metal printers and farms of desktop machines spread powder and unattended-fire hazards into small flex units with little protection.
- Recycled powders, new alloys and photopolymer resins arrive faster than test methods for them, leaving more judgment and liability with the bureau.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
HighAluminum and titanium powders ignite easily and react with water, and costly printers sit near combustible powder, resin and filament.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Metal powder handled in open air without inert gas or grounding
- Wet separators and filter cartridges left holding reactive sludge
- Print farms running dozens of desktop printers overnight unattended
- Dedicated metal powder room with inerting, grounding and class D extinguishers
- Filters and separator sludge passivated and removed on a schedule
- Smoke detection and automatic power cut-off over printer banks
Business interruption
ElevatedMetal printers have long lead times, and parts qualified for aerospace or medical use are tied to specific machines.
How long and how costly a shutdown is.
- Qualified production parts locked to one machine and parameter set
- Revenue concentrated in one or two industrial customers
- Overflow agreements with other bureaus running the same machines
- Offline backups of build files and machine parameters
Premises liability
LowCustomers mostly upload files online; visitors are few and the shop does no work at customers' premises.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Walk-in counters, classes or open maker sessions on site
- Visitors kept out of powder and post-processing areas
Products and completed work
HighHidden porosity, weak layer bonding or the wrong material in printed end-use parts causes failures in vehicles, devices and machinery.
Harm caused by what the business sells, serves, makes, installs or repairs.
- End-use parts for aircraft, vehicles, medical devices, firearms or safety equipment
- Bureau choosing orientation, supports and settings without customer sign-off
- Recycled powder blended beyond the material maker's reuse limits
- Contracts placing design and fitness for use on the customer
- Test coupons, density checks and build logs kept for every production lot
- Powder lot and reuse count recorded for each build
Workers’ injury
ElevatedStaff breathe fine metal and polymer powders, get dermatitis from uncured resin, and cut or burn themselves in finishing.
Injuries and illness to employees.
- Depowdering by hand with brushes and compressed air
- Uncured resin parts washed in open solvent baths without gloves
- Argon or nitrogen piped to printers in rooms with no oxygen monitor
- Enclosed depowdering stations with extraction and respirators
- Nitrile gloves, eye protection and closed wash stations for resin work
- Oxygen monitors with alarms wherever inert gas feeds the printers
Commercial auto
LowParts ship by parcel carrier; vehicle use is limited to occasional deliveries and errands.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Staff delivering urgent parts in their own cars
- Hired and non-owned auto cover for staff who drive
Crime and theft
ModerateTitanium and nickel alloy powders and compact printers have resale value, and invoice fraud targets large powder purchases.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Unsecured powder stock and desktop printers near loading doors
- Locked powder store with weighed issue to each build
Inland marine and equipment
ModerateCustomer parts, prototypes and demonstration printers travel to trade shows and clients, and printed parts ship daily.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Printers taken to trade shows or placed at customer sites
- Equipment floater listing printers that leave the premises
Environmental
ModerateUncured resin, wash solvents, spent powder and filter sludge are hazardous wastes produced in small volumes.
Pollution on or from the site or the work.
- Resin wash solvent poured to drains or into general waste
- Licensed collection of resin, solvent and powder waste
Cyber and data
ElevatedCustomers upload confidential designs through online portals, and networked printers depend on files and licenses that ransomware locks.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Defense or export-controlled designs held without access controls
- Printers connected to the internet for remote monitoring by their makers
- Encrypted file portal with access logs and deletion after each job
- Production network separated from office and guest networks
Professional liability
ElevatedBureaus redesign parts for printing, recommend materials and settings, and reverse-engineer spares, so engineering errors become their liability.
Loss or injury caused by advice, design, testing, care or another professional service.
- Design, topology optimization or reverse engineering sold as a service
- Reverse-engineered replacement parts for machinery or vehicles
- Design changes reviewed and signed off by a qualified engineer
- Written scope stating who approves design changes and material choices
Umbrella and excess
ElevatedA printed part failing in an aircraft, vehicle or implant, or a powder explosion in a shared building, can exceed primary limits.
How likely one liability event is to exhaust primary limits.
- Production parts for aviation, medical or vehicle safety uses
- Metal powder rooms in multi-tenant buildings
- Acceptance testing and traceable certificates passed to the customer
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Usually leased light-industrial or flex units, often multi-tenant, with offices, drop ceilings and added rooms; metal printing needs a separate powder room and inert gas storage.
- Occupancy
- Laser and binder printing of metal and polymer powders, resin printing and curing, filament print farms, sintering furnaces, some under hydrogen, and machining, blasting and finishing of parts.
- Protection
- Sprinklers with a reviewed plan for water near reactive powders, detection and power cut-off over printer banks, class D extinguishers, inerted collectors and grounding.
- Exposure
- Shared walls and roofs with unrelated tenants in flex buildings; a powder deflagration or print farm fire reaches neighbors quickly, and their fires reach costly printers.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: printing and powders
On site: post-processing
On site: quality and customers
On site: premises and data
Refer or decline if you find
- Metal powder handled without inerting, grounding or class D extinguishers
- Reactive filter sludge or wet separator waste stored indoors
- Print farm running unattended in a combustible room with no detection
- Flight, implant or vehicle safety parts printed without lot testing
- Contracts accepting design responsibility and unlimited consequential damages
How UrbanStat data helps.
Water reaching stored aluminum or titanium powder creates a reactive hazard, so floor-level flooding matters. Earthquake shaking knocks precision printers out of calibration, and wind-damaged roofs let rain onto costly machines.
- Flood scores at the address show whether stored metal powders and floor-mounted printers sit in water's path, before setting property terms.
- Parcel and permit data give the building's construction date and permit history, a check on whether powder rooms and gas storage were permitted.
- Street-by-street exposure views show when insured bureaus and neighboring tenants build up value in one flex building, with alerts at a set threshold.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
2.8 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.
0.9 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: All other plastics product manufacturing (NAICS 326199). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
13 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Other Plastics Product Manufacturing (NAICS 32619), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
1,008 citations from 312 inspections; 69% were classed serious, willful or repeat.
- 1910.147 The control of hazardous energy (lockout/tagout)174
- 1910.212 General requirements for all machines76
- 1910.134 Respiratory protection58
- 1910.1200 Hazard communication55
- 1910.178 Powered industrial trucks47
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: All Other Plastics Product Manufacturing (NAICS 326199). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
443 facilities reported toxic chemical releases totaling 10.5 million pounds on and off site.
- Styrene8.7M
- Methyl methacrylate268,278
- Toluene201,989
Chemicals released in the largest amounts, in pounds. 314 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: All Other Plastics Product Manufacturing (NAICS 326199). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Equipment breakdown
- Lasers, optics, chillers and controls on metal printers fail without fire and cost a great deal to repair.
- Product recall
- A powder lot or parameter error can mean recalling printed parts already built into customers' products.
- Aircraft products liability
- Parts supplied into aviation are excluded on many general liability forms and need specific cover.
- Customers' goods in care
- Customer parts, fixtures and prototypes sent for printing or finishing sit on site and may be insured by no one.
NAICS and SIC codes for 3d printing service bureaus
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 326199 | All Other Plastics Product Manufacturing |
| NAICS 2022 | 332710 | Machine Shops |
| NAICS 2022 | 332117 | Powder Metallurgy Part Manufacturing |
| NAICS 2022 | 332999 | All Other Miscellaneous Fabricated Metal Product Manufacturing |
| NAICS 2022 | 541420 | Industrial Design Services |
| SIC 1987, primary | 3089 | Plastics Products, NEC |
| SIC 1987 | 3599 | Industrial and Commercial Machinery and Equipment, NEC |
| SIC 1987 | 3499 | Fabricated Metal Products, NEC |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.