Dental laboratoriesNAICS 339116 · SIC 8072
Dental laboratories make crowns, bridges, dentures, implant parts and orthodontic appliances to dentists' prescriptions, using casting furnaces, porcelain ovens, acrylics and increasingly milling machines and 3D printers. Open flames and flammable monomer in small workshops cause fires, and dust and fumes harm technicians.
NAICS 339116 Dental LaboratoriesSIC 8072 Dental Laboratories
Where losses come from.
- 01
Bench fires from torches, burnout furnaces and flammable acrylic monomer
- 02
Technician illness from silica, metal and acrylic dust, and burns and cuts
- 03
Remakes and injury claims from ill-fitting or wrongly specified restorations
- PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: Moderate, 2 of 5; sector average 3.6; all business types 3.6.
- Intraoral scanning, milling and resin printing replace much hand work, cutting dust and burns but adding costly equipment, software dependence and resin chemical exposure.
- Dental groups and service organizations consolidate buying, so a lab often relies on fewer, larger clients and faces tighter contract and indemnity terms.
- Low-cost offshore and remote design competition pressures labs to outsource, which raises questions about material origin, disclosure and who answers for defects.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ElevatedGas torches, burnout and porcelain furnaces, alcohol lamps and methyl methacrylate monomer share small rooms with costly digital equipment.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Furnaces running overnight unattended on combustible benches
- Monomer and alcohol kept in open containers at benches
- Oxygen and fuel gas cylinders unsecured or stored together
- Furnaces on non-combustible surfaces with clearance and timers
- Flammable liquids limited to a day's supply outside a cabinet
- Fixed gas piping with shut-off valves and flashback arrestors
Business interruption
ModerateCases can be outsourced to another lab within days, though scanners and mills take time to replace.
How long and how costly a shutdown is.
- A few dental groups providing most of the work
- Design files backed up off site and a reciprocal lab agreement
Premises liability
LowA closed workshop fed by couriers and digital scans; the public has little reason to come in.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Denture fittings, relines or repairs done for walk-in patients
- Separate clean patient room away from the workshop
Products and completed work
ElevatedEvery appliance goes into a mouth: poor fit, fractures, undeclared alloys and allergic reactions bring remakes and occasional injury claims.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Work outsourced offshore without disclosing origin or materials to the dentist
- Nickel- or beryllium-containing alloys in crowns and frameworks
- Implant components milled in-house to fit other makers' systems
- Material and lot records kept for every case
- Written prescription from the dentist for each job
- Approved materials only, with documentation passed to the dentist
Workers’ injury
ElevatedGrinding and blasting release silica and metal dust; monomer vapors, hot metal, sharp tools and fine repetitive work add up.
Injuries and illness to employees.
- Sandblasting or grinding without local extraction
- Impressions handled without disinfection on arrival
- Technicians working for hours at benches with poor posture support
- Extraction at every bench, with filters changed on schedule
- Incoming cases disinfected before unpacking
- Eye protection and heat-resistant gloves at casting stations
Commercial auto
ModerateSmall labs rely on couriers and scan files; larger ones keep a driver or two on local rounds.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Part-time drivers using their own cars on tight schedules
- Driving record checks, or courier services in place of own drivers
Crime and theft
ModerateGold and other precious alloys, plus bench scrap, are compact and easy to remove.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- No weighing of alloy issued against metal returned
- Alloy locked in a safe and reconciled by weight
Inland marine and equipment
ModerateCases, models and impressions belonging to dentists move in and out by courier every day.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- High-value implant cases sent by uninsured post
- Transit cover for work in the lab's care and tracked delivery
Environmental
ModeratePlaster sludge, pickling acids, monomer, electrolytes and metal dust arise in small quantities.
Pollution on or from the site or the work.
- Sinks without plaster traps, or acids poured to drain
- Plaster traps cleaned regularly and chemical waste collected by a licensed hauler
Cyber and data
ElevatedIntraoral scans, design files and patient names arrive from dentists online, and a ransomware attack stops scanning, milling and printing at once.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Case management software and mills on one flat office network
- Patient scans exchanged with dentists by unencrypted email
- Offline backups of design files and case records, tested regularly
- Multi-factor sign-in for portals, email and remote design staff
Professional liability
ModerateWork follows the dentist's prescription and clinical judgment; design, shade and material advice and any patient contact add modest exposure.
Loss or injury caused by advice, design, testing, care or another professional service.
- Denturists or technicians fitting appliances directly to patients
- Remote design services sold to other labs and clinics
- Dentist approves the prescription and digital design before production
- Patient care only by staff licensed for it where the law allows
Umbrella and excess
ModerateHarm from a restoration is usually limited to one patient; a widespread alloy or material defect is the rare severe case.
How likely one liability event is to exhaust primary limits.
- One material lot used across many dentists' cases before a defect shows
- Material lot numbers recorded per case so affected patients can be traced
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Small units in older mixed-use or light industrial buildings, often upper floors or shared strips, with gas and compressed air piped to benches and frequent tenant alterations.
- Occupancy
- Gas torches, burnout and porcelain furnaces, acrylic monomer, alcohol lamps, resin printers and mills generating fine dust, with plaster and model stock throughout the workshop.
- Protection
- Monitored smoke detection, extinguishers at benches, furnaces on timers over non-combustible surfaces, flammable liquid cabinets, dust extraction, sprinklers where the building has them, and a safe for precious alloy.
- Exposure
- Shared walls and ceilings with restaurants, retailers and offices mean fire can travel both ways, and labs inside medical buildings depend on that building's protection.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: work performed
On site: premises and fire
On site: health and handling
On site: records and history
Refer or decline if you find
- Furnaces left running overnight on wooden benches
- Offshore outsourcing concealed from prescribing dentists
- Blasting or grinding with no dust extraction
- Beryllium alloys cast without specific controls
How UrbanStat data helps.
Labs often occupy older mixed-use buildings, where street-level units flood and benchtop furnaces, mills and gas lines shift in an earthquake. Precious alloy and compact digital equipment attract burglars.
- Crime scores at the address inform safe and alarm requirements for labs holding precious alloy and portable scanners.
- Parcel and permit data give the construction date and permit history of older mixed-use buildings, a check on whether a lab's gas and electrical work was permitted.
- The risk analysis API returns flood and earthquake scores in seconds, letting small-premium lab accounts be checked without slowing the quote.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
0.8 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.
0.2 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Dental laboratories (NAICS 339116). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
4 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Medical Equipment and Supplies Manufacturing (NAICS 33911), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
16 citations from 2 inspections; 75% were classed serious, willful or repeat.
- 1910.1030 Bloodborne pathogens11
- 1910.1200 Hazard communication3
- 1910.37 Maintenance, safeguards, and operational features for exit routes1
- 1910.132 General requirements (personal protective equipment)1
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Dental Laboratories (NAICS 339116). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
131 facilities reported toxic chemical releases totaling 3.4 million pounds on and off site.
- Ethylene glycol2.6M
- Methanol98,956
- N-methyl-2-pyrrolidone95,774
Chemicals released in the largest amounts, in pounds. 80 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: industry group 3391 (NAICS 3391), the closest published group. Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Equipment breakdown
- Mills, sintering furnaces and printers fail electrically or mechanically, stopping digital work while parts are shipped.
- Valuable papers and records
- Models, case records and design files belong to dentists and patients and are costly to recreate after a fire.
- Product recall
- A defective lot of zirconia, alloy or resin can force remakes across many dentists' cases.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.