Jewelry manufacturersNAICS 339910 · SIC 3911

Jewelry manufacturers cast, stamp, solder, set, polish and plate rings, chains and other pieces in precious or base metals, from benchtop workshops to casting houses. Gold, platinum and loose stones are present at every bench and in every shipment, so theft and unexplained loss dominate the account.

NAICS 339910 Jewelry and Silverware ManufacturingSIC 3911 Jewelry, Precious Metal+2 more codes

Manufacturing · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Burglary, robbery and employee theft of metal, stones and finished pieces

  2. 02

    Loss of goods in transit, with sales staff or out on memo

  3. 03

    Torch, furnace and polishing-dust fires in small multi-tenant workshops

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: Moderate, 2 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Moderate, 2 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Low, 1 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: High, 4 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: High, 4 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Moderate, 2 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Computer design and printed wax or resin models replace much hand carving, adding resin chemicals and digital files while speeding custom orders.
  • Laboratory-grown diamonds and recycled metals are now mainstream, raising disclosure and labeling disputes when stones or alloys are misdescribed to retailers or consumers.
  • High metal prices make workshops richer targets and raise stock values sharply, so limits set at renewal can fall short within months.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Elevated
Casting furnaces, burnout kilns, oxygen and fuel gas torches, polishing lint and plating chemicals crowd small workshops.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Burnout kilns running overnight in multi-tenant upper floors
  • Polishing dust collectors and ducts not cleaned out
  • Gas cylinders unsecured beside benches
Controls that matter
  • Kilns and furnaces on non-combustible bases with timers
  • Dust collectors emptied on schedule, with sweeps refined
  • Piped gas with shut-offs and flashback arrestors

Business interruption

Elevated
Master models, molds and skilled bench workers are hard to replace, and orders peak before holidays.

How long and how costly a shutdown is.

Watch for
  • Molds and design files kept only on the premises
  • Most revenue earned in one pre-holiday season
Controls that matter
  • Digital design files and master molds duplicated off site
  • Trade casting or finishing contractors identified as backup

Premises liability

Low
Workshops are locked, trade-only premises with almost no public access.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Showroom or classes bringing the public into the workshop
Controls that matter
  • Visitors confined to a separate reception area

Products and completed work

Moderate
Finished pieces rarely injure, but nickel allergy and lead or cadmium in low-cost children's jewelry bring recalls.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Costume or children's jewelry made with imported base-metal components
  • Metal purity or stone treatments misdescribed on invoices
Controls that matter
  • Assay and heavy-metal testing of alloys and components
  • Hallmarking and written disclosure of treatments

Workers’ injury

Moderate
Bench work brings burns, cuts, eye injuries and strain; plating adds chemical fumes, and casting investment releases silica dust.

Injuries and illness to employees.

Watch for
  • Cyanide plating baths or acid pickles without extraction
  • Polishing lathes run with loose sleeves or hair
  • Investment powder mixed and flasks broken out without dust extraction
Controls that matter
  • Local exhaust at plating, casting and soldering stations
  • Eye protection and guarded polishing motors

Commercial auto

Low
No delivery fleet; the concern is who drives with goods, not the driving.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Sales staff driving alone with sample lines
Controls that matter
  • Non-owned auto cover and travel security rules

Crime and theft

High
Gold grain, platinum, loose diamonds and finished pieces are compact, untraceable once melted, and handled by every employee.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • No daily weighing of metal issued to and returned from benches
  • Stock left on benches overnight instead of in the safe
  • Keys and safe combinations held by many employees
Controls that matter
  • Rated safe or vault with monitored alarm and line security
  • Metal and stone reconciliation by weight and count, job by job
  • Background checks and dual control when opening and closing

Inland marine and equipment

High
Goods travel constantly: to setters, platers and customers, with salespeople, at trade shows and on memo.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Shipments by ordinary post above the carrier's declared limit
  • Customers' stones and pieces held for setting or repair
  • Trade show travel with a full sample line
Controls that matter
  • Jewelers block cover with limits per shipment, traveler and show
  • Signed receipts for every piece of customers' property
  • Registered or armored carriage for higher-value sends

Environmental

Elevated
Cyanide and acid plating baths, pickling solutions, investment waste and refining residues are hazardous even in bench-scale volumes.

Pollution on or from the site or the work.

Watch for
  • Spent plating solution or rinse water sent to the drain
  • In-house refining with nitric acid
Controls that matter
  • Licensed collection of spent baths with records
  • Closed-loop rinsing and secondary containment under tanks

Cyber and data

Moderate
Design files and order systems run the workshop, and makers selling direct online hold customer and payment data.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Own online store storing card details or custom order data
  • Design files and printers reachable from the internet for remote work
Controls that matter
  • Hosted checkout so card numbers never touch the maker's systems
  • Off-site backups of design files and order history

Professional liability

Low
Products, not advice, are sold; custom design disputes are product and contract matters rather than professional errors.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Appraisals or valuation certificates issued with finished pieces
Controls that matter
  • Valuations left to independent appraisers or laboratories

Umbrella and excess

Moderate
Liability exposures are small, but lead or cadmium in children's pieces and a fire spreading through a shared building can still escalate.

How likely one liability event is to exhaust primary limits.

Watch for
  • Children's or low-cost jewelry sold through mass retailers
  • Casting and plating in multi-tenant buildings with residents above
Controls that matter
  • Heavy-metal testing of every children's product lot
  • Kilns and plating confined to cut-off, sprinklered rooms
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Older multi-story loft or exchange buildings in jewelry districts, or modern light industrial units for larger casting houses, often with mixed tenants and shared ventilation shafts.
Occupancy
Wax model printing, burnout kilns, induction or torch casting, soldering, polishing with lint-producing buffs, and cyanide or acid plating, beside precious metal and stones.
Protection
Sprinklers or at least monitored smoke and heat detection, kilns on timers, piped gas with shut-offs, a rated vault, monitored alarms with line security and interlocking entry doors.
Exposure
Neighboring workshops with their own kilns and plating share floors and shafts, and a district known for its stock attracts organized burglary crews.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: operations

On site: security

On site: goods off premises

On site: premises and history

Refer or decline if you find

  • No inventory reconciliation or unexplained shortages in past counts
  • Stock kept outside a rated safe overnight
  • Salespeople carrying high values alone in personal cars
  • Children's jewelry with untested imported components
  • Cyanide plating with no waste records
05 / Location

How UrbanStat data helps.

Workshops cluster in jewelry districts, on upper floors of older shared buildings, so neighborhood crime and other tenants' security and fire standards matter. One earthquake, or a flood reaching basement vaults, can hit many insured manufacturers in a single building.

CrimeFloodEarthquake
  • Crime scores at the address, not the postal code, inform vault, alarm and overnight stock conditions for a workshop holding precious metal and stones.
  • Street-by-street exposure views show how much insured jewelry stock is concentrated in one building or district, with alerts when a set threshold is passed.
  • Parcel and permit data give the age and permit history of older multi-tenant buildings where workshops with kilns and torches share floors.
Crime · Flood · Earthquake
06 / Public loss data · NAICS 339910

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

2.0 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Other miscellaneous manufacturing
2.0
All private industry
2.3

0.6 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Other miscellaneous manufacturing (NAICS 3399), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

6 fatal work injuries in 2024.

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Other Miscellaneous Manufacturing (NAICS 3399), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

32 citations from 8 inspections; 75% were classed serious, willful or repeat.

  • 1910.1200 Hazard communication
    9
  • 1910.134 Respiratory protection
    4
  • 1910.212 General requirements for all machines
    3
  • 1910.1000 Air contaminants
    2
  • 1910.132 General requirements (personal protective equipment)
    2

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Jewelry and Silverware Manufacturing (NAICS 339910). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

15 facilities reported toxic chemical releases totaling 7,415 pounds on and off site.

  • Dichloromethane
    6,202
  • Ammonia
    1,205
  • Silver
    7

Chemicals released in the largest amounts, in pounds. 1 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Jewelry and Silverware Manufacturing (NAICS 339910). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Jewelers block
Metal, stones and finished pieces on premises, in transit and on memo need cover written for jewelry trade risks.
Employee dishonesty
Gold grain and stones pass through every bench, and slow skimming shows only at reconciliation.
Kidnap and extortion
Owners and key holders can be followed home or held to force a vault opening.
Product recall
Lead, cadmium or nickel found in costume or children's lines forces retailers to pull whole collections.

NAICS and SIC codes for jewelry manufacturers

SystemCodeIndustry
NAICS 2022, primary339910Jewelry and Silverware Manufacturing
SIC 1987, primary3911Jewelry, Precious Metal
SIC 19873961Costume Jewelry and Costume Novelties, Except Precious Metal
SIC 19873915Jewelers Findings and Materials and Lapidary Work
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →