Gem cuttersNAICS 339910 · SIC 3915

Gem cutters turn rough diamonds and colored stones into finished gems, sawing, shaping and faceting them on laps and wheels, sometimes with laser saws, for dealers, jewelers and their own account. A fortune fits in a paper fold, much of it owned by others, and one slip at the wheel can shatter a stone.

NAICS 339910 Jewelry and Silverware ManufacturingSIC 3915 Jewelers Findings and Materials and Lapidary Work

Manufacturing · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Theft, robbery or mysterious disappearance of loose stones on premises or in transit

  2. 02

    Damage to or loss of customers' stones while being cut or recut

  3. 03

    Disputes over stone identity, switching or weight loss after cutting

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: Moderate, 2 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: Low, 1 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Moderate, 2 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Low, 1 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Severe, 5 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: High, 4 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Low, 1 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Low, 1 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Laboratory-grown diamonds now pass through the same benches, so mixing, misidentification and disclosure disputes rise while the value of that work per stone falls.
  • Laser sawing and computer scanning cut breakage and raise yield, but add costly equipment, high-voltage supplies and data files that must be protected.
  • Cutting has concentrated in fewer large centers, so shipments across borders and hand-carried parcels grow in value and frequency.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Moderate
Small workshops with water- or oil-cooled laps and little combustible stock; values lie in portable stones, not buildings.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Laser sawing equipment with high-voltage supplies and chillers
  • Oil-based coolants and solvent cleaners near motors
Controls that matter
  • Electrical maintenance on lasers and motors, with extinguishers at hand

Business interruption

Moderate
Benches and laps are replaced quickly; the loss of a key cutter or a large parcel hurts more.

How long and how costly a shutdown is.

Watch for
  • One master cutter responsible for all high-value work
Controls that matter
  • Documented cutting plans and scans stored off site

Premises liability

Low
Locked trade premises with visitors admitted singly by appointment.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Retail customers or students allowed into the cutting room
Controls that matter
  • Reception separated from benches by a controlled door

Products and completed work

Low
Cut stones do not injure anyone; complaints concern grading, treatment disclosure or yield, which are professional matters.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Treated or laboratory-grown stones sold without written disclosure
Controls that matter
  • Independent grading reports and disclosure on every invoice

Workers’ injury

Moderate
Seated precision work causes eye and repetitive strain; dry grinding of some stones releases harmful silica dust.

Injuries and illness to employees.

Watch for
  • Dry cutting or polishing of quartz, jade or agate
  • Long shifts at the wheel without breaks
Controls that matter
  • Wet cutting with local extraction
  • Adjustable seating, magnification and task lighting

Commercial auto

Low
No commercial vehicles; staff carry stones on foot, by car or by air.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Regular car travel carrying parcels between dealers
Controls that matter
  • Non-owned auto cover and varied routes

Crime and theft

Severe
Loose stones are the most concentrated, portable and untraceable wealth in commerce, and cutters hold them unmounted.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Stones left at benches or in drawers outside the safe
  • No parcel log showing weight and count at each hand-off
  • Solo working, or doors opened to unverified callers
Controls that matter
  • High-rated safe or vault with monitored alarm and hold-up buttons
  • Interlocking entry doors, cameras and appointment-only access
  • Daily count and weight reconciliation signed by two people

Inland marine and equipment

High
Most stones on the bench belong to dealers, and parcels move by courier, by hand and to grading laboratories.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Customers' goods exceeding the insured's own stock in value
  • Hand-carried parcels on public transport or flights
  • Breakage during cutting assumed to be covered
Controls that matter
  • Written terms with each owner on values, breakage and liability
  • Armored or registered carriage above a set parcel value
  • Jewelers block limits for goods of others, transit and travel

Environmental

Low
Stone slurry, coolant and a little cleaning acid are the only wastes.

Pollution on or from the site or the work.

Watch for
  • Boiling acid cleaning of diamonds without a fume hood
Controls that matter
  • Slurry settled and solids removed before water is discharged

Cyber and data

Moderate
Few personal records are held; the threat is ransomware or theft of stone scans, cutting plans and inventory records needed to track parcels.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Parcel and inventory records held only on one office computer
  • Remote camera and alarm access protected by default passwords
Controls that matter
  • Encrypted off-site backups of scans, parcel logs and inventory
  • Camera and alarm systems on a separate network with changed passwords

Professional liability

Moderate
Cutting plans, yield estimates and grading opinions given to stone owners bring disputes when the finished result disappoints.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Grading, appraisal or valuation reports issued for customers or lenders
  • Advice on buying rough stones on commission
Controls that matter
  • Written cutting plans with yield ranges agreed before work starts
  • Independent laboratory grading rather than in-house certificates

Umbrella and excess

Low
Few visitors, no products that injure and no fleet; the severe losses are to property in care, not liability.

How likely one liability event is to exhaust primary limits.

Watch for
  • Armed robbery in which visitors or neighbors are hurt
Controls that matter
  • Interlocking doors and hold-up procedures that avoid confrontation
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Upper-floor suites in older multi-tenant office or exchange buildings in jewelry districts, with shared corridors, freight elevators and vaults often added after construction.
Occupancy
Sawing, bruting and polishing on water- or oil-cooled laps, laser cutting with chillers, acid cleaning, and loose stones of great value at every bench.
Protection
A rated safe or vault, monitored intrusion and hold-up alarms, interlocking entry doors, cameras recording all benches and doors, and smoke detection tied to the alarm.
Exposure
Other tenants in the same building set much of the risk: their security lapses, fires and break-ins through shared walls or ceilings reach the cutter's suite.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: stones and customers

On site: security

On site: transit and travel

On site: workshop and records

Refer or decline if you find

  • Stones kept outside the safe when unattended
  • No written agreement with owners of stones in care
  • Prior unexplained shortages or disappearance claims
  • Parcels sent by ordinary mail or carried alone routinely
05 / Location

How UrbanStat data helps.

Cutters cluster in gem and jewelry districts and shared exchange buildings, where street crime, robbery patterns and other tenants' security set the risk. Several insureds often share one address, so an earthquake or flooded basement vault hits them together.

CrimeEarthquakeFlood
  • Crime scores at the address give a property-level view of burglary and robbery exposure for premises where stock fits in a pocket.
  • Street-by-street exposure views show the total insured stone and jewelry values in one exchange building, with alerts when the accumulation passes a set threshold.
  • Underwriting rules drawn as areas on the map refer new jewelers block submissions automatically in districts where the insurer already carries heavy concentration.
Crime · Earthquake · Flood
06 / Public loss data · NAICS 339910

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

2.0 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Other miscellaneous manufacturing
2.0
All private industry
2.3

0.6 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Other miscellaneous manufacturing (NAICS 3399), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

6 fatal work injuries in 2024.

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Other Miscellaneous Manufacturing (NAICS 3399), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

32 citations from 8 inspections; 75% were classed serious, willful or repeat.

  • 1910.1200 Hazard communication
    9
  • 1910.134 Respiratory protection
    4
  • 1910.212 General requirements for all machines
    3
  • 1910.1000 Air contaminants
    2
  • 1910.132 General requirements (personal protective equipment)
    2

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Jewelry and Silverware Manufacturing (NAICS 339910). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

15 facilities reported toxic chemical releases totaling 7,415 pounds on and off site.

  • Dichloromethane
    6,202
  • Ammonia
    1,205
  • Silver
    7

Chemicals released in the largest amounts, in pounds. 1 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Jewelry and Silverware Manufacturing (NAICS 339910). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Jewelers block
Stones on premises, in transit and on memo need all-risks cover whose security conditions often decide whether a claim pays.
Employee dishonesty
Trusted cutters handle unmounted stones alone, and inside substitution or theft often surfaces only at a count.
Kidnap and extortion
Staff with vault access can be targeted at home or in transit to force an opening.

NAICS and SIC codes for gem cutters

SystemCodeIndustry
NAICS 2022, primary339910Jewelry and Silverware Manufacturing
SIC 1987, primary3915Jewelers Findings and Materials and Lapidary Work
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →