Machine shopsNAICS 332710 · SIC 3599
Machine shops cut metal and plastic parts to customers' drawings on CNC mills, lathes, grinders and electrical discharge machines, in small lots for many industries. Machines flooded with coolant or oil run unattended overnight, and the shop rarely controls where its parts end up: in a pump, an aircraft or a surgical instrument.
NAICS 332710 Machine ShopsSIC 3599 Industrial and Commercial Machinery and Equipment, NEC
Where losses come from.
- 01
Fires inside machine enclosures and mist collectors while oil-cooled work runs unattended
- 02
Out-of-tolerance or wrong-material parts that end up in aircraft, medical or pressure equipment
- 03
Hands caught in lathes, mills and chip conveyors, and cuts from sharp chips and tooling
- PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
- Robot loaders and pallet systems let shops run lights-out through nights and weekends, so a coolant fire burns longer before anyone sees it.
- Growth in aerospace, defense and medical work brings tighter traceability and data security terms, raising both product severity and cyber exposure.
- A shortage of experienced machinists puts newer operators on complex machines, which means more crashes, scrap and guarding injuries.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ElevatedCutting oil mist, oily chips and discharge machine oil ignite inside enclosures, and lights-out running lets a small fire grow unseen.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Straight-oil lathes or sinker discharge machines running with nobody in the building
- Titanium, magnesium or aluminum fines left in machines and chip bins
- Mist residue built up on ducts, light fittings and roof steel
- Machine-mounted suppression on every oil-cooled or discharge machine run unattended
- Mist collectors serviced and chips moved out of the building every shift
- Fluid level and temperature cutouts on discharge machines, and monitored sprinklers
Business interruption
ElevatedFive-axis machines and inspection equipment take months to replace, and customers move work to rival shops quickly during a shutdown.
How long and how costly a shutdown is.
- One machine or measuring device that every premium job depends on
- Programs, fixtures and inspection plans that exist only on site
- A single customer or program taking most of the output
- Off-site and offline backups of programs, models and setup sheets
- Agreements with peer shops to take overflow or emergency work
Premises liability
LowCustomers' quality staff and delivery drivers are the only visitors, and the work stays inside the shop.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Drivers and visitors walking across the machining floor
- Marked walkways and escorted visits with eye protection
Products and completed work
HighParts go into aircraft, implants, firearms, valves and vehicles; a bad lot or wrong alloy can cause injury and costly recalls.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Flight-critical, implant, firearm or pressure-containing parts in the order book
- Purchase orders that pass sorting, line-down and recall costs to the shop
- Reverse engineering or design input on parts with no original drawing
- First-article, in-process and final inspection records kept for each lot
- Material certificates and heat lot traceability from bar or plate to shipment
- Contract review that caps consequential damages and recall charges
Workers’ injury
ElevatedRotating chucks, spindles and hot, sharp chips cause entanglement, cuts and eye injuries, and loading heavy work onto machines strains backs.
Injuries and illness to employees.
- Manual lathes and mills with no chuck guards or interlocks
- Door interlocks bypassed so operators can watch or adjust a running cycle
- Dermatitis and mist complaints from poorly maintained coolant
- Working interlocks on enclosures, and lockout used for setup and clearing
- Hoists and cranes at machines for heavy parts, vises and fixtures
- Coolant concentration and bacteria checked, with mist extraction on enclosures
Commercial auto
ModerateA pickup or van delivers parts locally and shuttles work to outside heat treaters, platers and coaters.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Regular shuttle runs by shop staff in their own vehicles
- Driving record checks and hired and non-owned auto cover
Crime and theft
ModerateCarbide tooling, inspection instruments and nonferrous scrap are resaleable and easy to carry out.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Carbide inserts and scrap sold with no reconciliation
- Tool cribs left open on night shifts
- Locked tool crib with issues tracked by job
- Scrap weighed and sold under contract, with receipts reconciled
Inland marine and equipment
ModerateParts travel to outside processors and customers, and customer-supplied material, fixtures and gauges sit in the shop.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Large lots held at outside heat treaters, platers or coaters
- Customer-owned bar, forgings or castings with no agreed value
- Transit and processor limits sized to the largest lot
- Log of customer property received, with condition and value
Environmental
ModerateCoolants, cutting oils, oily chips and degreasers are the wastes, and older sites can carry chlorinated solvent contamination.
Pollution on or from the site or the work.
- Past vapor degreasing with chlorinated solvents
- Oily chip bins draining onto unpaved ground outside
- Aqueous or sealed vacuum parts washers in place of solvent tanks
- Covered, contained chip storage with oil recovered by a spinner
Cyber and data
ElevatedPrograms, models and customer drawings live on networked machines and servers; ransomware stops every spindle, and defense work carries data security terms.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Machine controls on the office network with shared logins and old operating systems
- Controlled technical data for defense or aerospace customers kept without access controls
- Production machines on a separate network segment with offline backups
- Multi-factor login and access logs for customer data and file transfers
Professional liability
ModerateMost shops build to print, but suggested design changes, reverse engineering and inspection reports carry advice exposure.
Loss or injury caused by advice, design, testing, care or another professional service.
- Shop engineers redesigning parts or choosing materials for customers
- Customer sign-off on any deviation, substitution or design change
Umbrella and excess
HighA failed part in an aircraft, vehicle or medical device can cause deaths or many injuries, and the shop is sued alongside the assembler.
How likely one liability event is to exhaust primary limits.
- Flight, implant or firearm parts making up a large share of sales
- Limits set by the most severe end use the shop supplies
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Single-story steel or masonry buildings, from older mill-type premises with timber floors to multi-tenant industrial units sharing walls and roofs with other businesses.
- Occupancy
- Machining with flammable cutting oils and coolant mist, oily chips, discharge machines, small solvent and gas cylinder stocks, and machines running unattended through nights and weekends.
- Protection
- Sprinklers throughout, in-machine suppression on oil-cooled and discharge equipment, mist collection, daily chip removal, and a monitored fire and intrusion alarm with cameras.
- Exposure
- Industrial parks and multi-tenant units put the shop beside paint, plastics or woodworking neighbors, and chip bins or pallets stacked against outside walls feed fires from outside.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: work and customers
On site: machines and fire protection
On site: people and guarding
On site: data and records
Refer or decline if you find
- Oil-cooled machines running unattended with no in-machine suppression
- Flight-critical or implant parts made without lot traceability
- Interlocks bypassed on enclosed machines so operators can watch cycles
- Magnesium or titanium fines mixed with ordinary chips
- Unlimited recall or line-down charges accepted in customer terms
How UrbanStat data helps.
Machining centers sit on ground-floor slabs, so shallow flood water ruins spindles, controls and customer parts. Shaking knocks precision machines out of alignment, and wind damage to light roofs lets rain in on them.
- Flood scores at the address show whether shallow water could reach ground-floor machining centers, controls and customer-owned material before equipment values are accepted.
- Parcel and permit data give the construction date and permit history, flagging older mill-type buildings and recent electrical or sprinkler work worth asking about.
- Street-by-street exposure views show accumulated insured value where many small shops share one multi-tenant industrial park, with alerts when a set threshold is passed.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
2.7 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.
0.6 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Machine shops (NAICS 33271), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
5 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Machine Shops; Turned Product; and Screw, Nut, and Bolt Manufacturing (NAICS 3327), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
1,486 citations from 411 inspections; 61% were classed serious, willful or repeat.
- 1910.147 The control of hazardous energy (lockout/tagout)157
- 1910.212 General requirements for all machines146
- 1910.1200 Hazard communication133
- 1910.178 Powered industrial trucks88
- 1910.134 Respiratory protection76
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Machine Shops (NAICS 332710). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
85 facilities reported toxic chemical releases totaling 291,094 pounds on and off site.
- Nitrate compounds223,306
- Chromium and chromium compounds40,668
- Dichloromethane15,226
Chemicals released in the largest amounts, in pounds. 65 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Machine Shops (NAICS 332710). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Aircraft products liability
- General liability forms often exclude parts used in aircraft, so aerospace work needs cover arranged on purpose.
- Product recall
- Customers charge back sorting, removal and replacement costs when a bad lot reaches their assembly lines.
- Equipment breakdown
- A crashed spindle or failed control on a five-axis machine stops key jobs without any fire.
- Customers' goods in care
- Customer-supplied forgings, castings and fixtures can be worth more than the job and are often irreplaceable.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.