---
title: "Machine shops (NAICS 332710, SIC 3599): Industry Risk Guide"
description: "NAICS 332710 · SIC 3599. Machine shops cut metal and plastic parts to customers' drawings on CNC mills, lathes, grinders and electrical discharge machines,…"
url: https://www.urbanstat.com/industry-risk-guides/machine-shops-naics-332710/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Machine shops NAICS 332710 · SIC 3599

Machine shops cut metal and plastic parts to customers' drawings on CNC mills, lathes, grinders and electrical discharge machines, in small lots for many industries. Machines flooded with coolant or oil run unattended overnight, and the shop rarely controls where its parts end up: in a pump, an aircraft or a surgical instrument.

[**NAICS 332710** Machine Shops](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332710) · [**SIC 3599** Industrial and Commercial Machinery and Equipment, NEC](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3599)

Manufacturing · Updated November 2026

Risk profile

1. [Property Elevated](#line-property)
2. [Business interruption Elevated](#line-bi)
3. [Premises liability Low](#line-gl)
4. [Products and completed work High](#line-products)
5. [Workers’ injury Elevated](#line-wc)
6. [Commercial auto Moderate](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment Moderate](#line-marine)
9. [Environmental Moderate](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Moderate](#line-prof)
12. [Umbrella and excess High](#line-umbrella)

**Products and completed work.** Parts go into aircraft, implants, firearms, valves and vehicles; a bad lot or wrong alloy can cause injury and costly recalls.

Loss drivers

## Where losses come from.

1. Fires inside machine enclosures and mist collectors while oil-cooled work runs unattended
2. Out-of-tolerance or wrong-material parts that end up in aircraft, medical or pressure equipment
3. Hands caught in lathes, mills and chip conveyors, and cuts from sharp chips and tooling

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Machine shops, colored by its rating
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Robot loaders and pallet systems let shops run lights-out through nights and weekends, so a coolant fire burns longer before anyone sees it.
- Growth in aerospace, defense and medical work brings tighter traceability and data security terms, raising both product severity and cyber exposure.
- A shortage of experienced machinists puts newer operators on complex machines, which means more crashes, scrap and guarding injuries.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Elevated (3 of 5)

Cutting oil mist, oily chips and discharge machine oil ignite inside enclosures, and lights-out running lets a small fire grow unseen.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Straight-oil lathes or sinker discharge machines running with nobody in the building
- Titanium, magnesium or aluminum fines left in machines and chip bins
- Mist residue built up on ducts, light fittings and roof steel

**Controls that matter**

- Machine-mounted suppression on every oil-cooled or discharge machine run unattended
- Mist collectors serviced and chips moved out of the building every shift
- Fluid level and temperature cutouts on discharge machines, and monitored sprinklers

### Business interruption: Elevated (3 of 5)

Five-axis machines and inspection equipment take months to replace, and customers move work to rival shops quickly during a shutdown.

Covers: How long and how costly a shutdown is.

**Watch for**

- One machine or measuring device that every premium job depends on
- Programs, fixtures and inspection plans that exist only on site
- A single customer or program taking most of the output

**Controls that matter**

- Off-site and offline backups of programs, models and setup sheets
- Agreements with peer shops to take overflow or emergency work

### Premises liability: Low (1 of 5)

Customers' quality staff and delivery drivers are the only visitors, and the work stays inside the shop.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Drivers and visitors walking across the machining floor

**Controls that matter**

- Marked walkways and escorted visits with eye protection

### Products and completed work: High (4 of 5)

Parts go into aircraft, implants, firearms, valves and vehicles; a bad lot or wrong alloy can cause injury and costly recalls.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Flight-critical, implant, firearm or pressure-containing parts in the order book
- Purchase orders that pass sorting, line-down and recall costs to the shop
- Reverse engineering or design input on parts with no original drawing

**Controls that matter**

- First-article, in-process and final inspection records kept for each lot
- Material certificates and heat lot traceability from bar or plate to shipment
- Contract review that caps consequential damages and recall charges

### Workers’ injury: Elevated (3 of 5)

Rotating chucks, spindles and hot, sharp chips cause entanglement, cuts and eye injuries, and loading heavy work onto machines strains backs.

Covers: Injuries and illness to employees.

**Watch for**

- Manual lathes and mills with no chuck guards or interlocks
- Door interlocks bypassed so operators can watch or adjust a running cycle
- Dermatitis and mist complaints from poorly maintained coolant

**Controls that matter**

- Working interlocks on enclosures, and lockout used for setup and clearing
- Hoists and cranes at machines for heavy parts, vises and fixtures
- Coolant concentration and bacteria checked, with mist extraction on enclosures

### Commercial auto: Moderate (2 of 5)

A pickup or van delivers parts locally and shuttles work to outside heat treaters, platers and coaters.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Regular shuttle runs by shop staff in their own vehicles

**Controls that matter**

- Driving record checks and hired and non-owned auto cover

### Crime and theft: Moderate (2 of 5)

Carbide tooling, inspection instruments and nonferrous scrap are resaleable and easy to carry out.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Carbide inserts and scrap sold with no reconciliation
- Tool cribs left open on night shifts

**Controls that matter**

- Locked tool crib with issues tracked by job
- Scrap weighed and sold under contract, with receipts reconciled

### Inland marine and equipment: Moderate (2 of 5)

Parts travel to outside processors and customers, and customer-supplied material, fixtures and gauges sit in the shop.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Large lots held at outside heat treaters, platers or coaters
- Customer-owned bar, forgings or castings with no agreed value

**Controls that matter**

- Transit and processor limits sized to the largest lot
- Log of customer property received, with condition and value

### Environmental: Moderate (2 of 5)

Coolants, cutting oils, oily chips and degreasers are the wastes, and older sites can carry chlorinated solvent contamination.

Covers: Pollution on or from the site or the work.

**Watch for**

- Past vapor degreasing with chlorinated solvents
- Oily chip bins draining onto unpaved ground outside

**Controls that matter**

- Aqueous or sealed vacuum parts washers in place of solvent tanks
- Covered, contained chip storage with oil recovered by a spinner

### Cyber and data: Elevated (3 of 5)

Programs, models and customer drawings live on networked machines and servers; ransomware stops every spindle, and defense work carries data security terms.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Machine controls on the office network with shared logins and old operating systems
- Controlled technical data for defense or aerospace customers kept without access controls

**Controls that matter**

- Production machines on a separate network segment with offline backups
- Multi-factor login and access logs for customer data and file transfers

### Professional liability: Moderate (2 of 5)

Most shops build to print, but suggested design changes, reverse engineering and inspection reports carry advice exposure.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Shop engineers redesigning parts or choosing materials for customers

**Controls that matter**

- Customer sign-off on any deviation, substitution or design change

### Umbrella and excess: High (4 of 5)

A failed part in an aircraft, vehicle or medical device can cause deaths or many injuries, and the shop is sued alongside the assembler.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Flight, implant or firearm parts making up a large share of sales

**Controls that matter**

- Limits set by the most severe end use the shop supplies

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Single-story steel or masonry buildings, from older mill-type premises with timber floors to multi-tenant industrial units sharing walls and roofs with other businesses.
- **Occupancy**: Machining with flammable cutting oils and coolant mist, oily chips, discharge machines, small solvent and gas cylinder stocks, and machines running unattended through nights and weekends.
- **Protection**: Sprinklers throughout, in-machine suppression on oil-cooled and discharge equipment, mist collection, daily chip removal, and a monitored fire and intrusion alarm with cameras.
- **Exposure**: Industrial parks and multi-tenant units put the shop beside paint, plastics or woodworking neighbors, and chip bins or pallets stacked against outside walls feed fires from outside.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- Which industries buy the parts, and what share goes into aircraft, medical, firearm or pressure applications?
- What share of work is built to customer prints, and what share does the shop design or reverse engineer?
- What quality certifications does the shop hold, and which customers audit it?
- Do purchase orders impose sorting, recall or line-down charges, and are they capped?
- Which outside processors do heat treating, plating or coating, and how is work tracked there?
- What caused recent claims, rejected lots or customer complaints?

### Documents to request

- Loss runs for the current and prior policy terms
- Customer list with industries served and sales by sector
- Quality certificates and recent customer audit findings
- Fire protection and machine suppression service reports
- Purchase order terms from the largest customers

### On site: work and customers

- What parts are on the machines today, in what materials, and for which customers?
- How is bar, plate and casting material identified and kept apart between jobs?
- Who checks first pieces and final lots, and with what measuring equipment?

### On site: machines and fire protection

- Which machines use straight oil, and which have built-in fire suppression?
- What runs overnight or at weekends, and who or what monitors it?
- How are mist collectors and ducts cleaned, and when was it last done?
- Where are oily chips stored, and how often do they leave the building?
- Is the building sprinklered, and are reactive metal fines kept apart from other chips?

### On site: people and guarding

- Are doors, chuck guards and interlocks working on every machine seen running?
- How are heavy workpieces, vises and fixtures lifted onto machine tables?
- How are coolant condition, skin complaints and mist exposure managed?

### On site: data and records

- Where are programs and customer models backed up, and are machines on a separate network?
- What lot traceability and inspection records would support the defense of a part failure?

### Refer or decline if you find

- Oil-cooled machines running unattended with no in-machine suppression
- Flight-critical or implant parts made without lot traceability
- Interlocks bypassed on enclosed machines so operators can watch cycles
- Magnesium or titanium fines mixed with ordinary chips
- Unlimited recall or line-down charges accepted in customer terms

Location

## How UrbanStat data helps.

Machining centers sit on ground-floor slabs, so shallow flood water ruins spindles, controls and customer parts. Shaking knocks precision machines out of alignment, and wind damage to light roofs lets rain in on them.

Flood · Tornado · Wind · Earthquake

- Flood scores at the address show whether shallow water could reach ground-floor machining centers, controls and customer-owned material before equipment values are accepted.
- Parcel and permit data give the construction date and permit history, flagging older mill-type buildings and recent electrical or sprinkler work worth asking about.
- Street-by-street exposure views show accumulated insured value where many small shops share one multi-tenant industrial park, with alerts when a set threshold is passed.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Tornado · Wind · Earthquake

Public loss data · NAICS 332710

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**2.7** recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Machine shops

**2.7**

All private industry

**2.3**

0.6 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Machine shops (NAICS 33271), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**5** fatal work injuries in 2024.

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Machine Shops; Turned Product; and Screw, Nut, and Bolt Manufacturing (NAICS 3327), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**1,486** citations from 411 inspections; 61% were classed serious, willful or repeat.

- 1910.147 The control of hazardous energy (lockout/tagout) **157**
- 1910.212 General requirements for all machines **146**
- 1910.1200 Hazard communication **133**
- 1910.178 Powered industrial trucks **88**
- 1910.134 Respiratory protection **76**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Machine Shops (NAICS 332710). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**85** facilities reported toxic chemical releases totaling **291,094 pounds** on and off site.

- Nitrate compounds **223,306**
- Chromium and chromium compounds **40,668**
- Dichloromethane **15,226**

Chemicals released in the largest amounts, in pounds. 65 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Machine Shops (NAICS 332710). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Aircraft products liability**: General liability forms often exclude parts used in aircraft, so aerospace work needs cover arranged on purpose.
- **Product recall**: Customers charge back sorting, removal and replacement costs when a bad lot reaches their assembly lines.
- **Equipment breakdown**: A crashed spindle or failed control on a five-axis machine stops key jobs without any fire.
- **Customers' goods in care**: Customer-supplied forgings, castings and fixtures can be worth more than the job and are often irreplaceable.

## NAICS and SIC codes for machine shops

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [332710](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332710) | Machine Shops |
| SIC 1987, primary | [3599](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3599) | Industrial and Commercial Machinery and Equipment, NEC |

**Related business types**

- [Screw machine and precision turned parts shops NAICS 332721](https://www.urbanstat.com/industry-risk-guides/screw-machine-and-precision-turned-parts-shops-naics-332721/)
- [Tool, die, mold and machine tool makers NAICS 333514](https://www.urbanstat.com/industry-risk-guides/tool-die-mold-and-machine-tool-makers-naics-333514/)
- [Gear, bearing and power transmission manufacturers NAICS 333612](https://www.urbanstat.com/industry-risk-guides/gear-bearing-and-power-transmission-manufacturers-naics-333612/)
- [3D printing service bureaus NAICS 326199](https://www.urbanstat.com/industry-risk-guides/3d-printing-service-bureaus-naics-326199/)
- [Commercial heat treaters NAICS 332811](https://www.urbanstat.com/industry-risk-guides/commercial-heat-treaters-naics-332811/)
- [Compare Machine shops with Screw machine and precision turned parts shops](https://www.urbanstat.com/industry-risk-guides/compare/?a=machine-shops-naics-332710&b=screw-machine-and-precision-turned-parts-shops-naics-332721)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/machine-shops-naics-332710/

- Page: Machine shops (NAICS 332710, SIC 3599): Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/machine-shops-naics-332710/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
