---
title: "3D printing service bureaus (NAICS 326199, SIC 3089): Industry Risk Guide"
description: "NAICS 326199 · SIC 3089. Service bureaus print prototypes and end-use parts to customers' files using polymer powder, resin, filament and metal powder…"
url: https://www.urbanstat.com/industry-risk-guides/3d-printing-service-bureaus-naics-326199/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# 3D printing service bureaus NAICS 326199 · SIC 3089

Service bureaus print prototypes and end-use parts to customers' files using polymer powder, resin, filament and metal powder machines, then depowder, cure, machine and finish them. Fine reactive metal powders and combustible polymer dust can ignite or explode, and printed parts increasingly go into products where a failure injures someone.

[**NAICS 326199** All Other Plastics Product Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-326199) · [**SIC 3089** Plastics Products, NEC](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3089) · [**NAICS 332710** Machine Shops](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332710) · [**NAICS 332117** Powder Metallurgy Part Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332117)

Manufacturing · Updated November 2026

Risk profile

1. [Property High](#line-property)
2. [Business interruption Elevated](#line-bi)
3. [Premises liability Low](#line-gl)
4. [Products and completed work High](#line-products)
5. [Workers’ injury Elevated](#line-wc)
6. [Commercial auto Low](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment Moderate](#line-marine)
9. [Environmental Moderate](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Elevated](#line-prof)
12. [Umbrella and excess Elevated](#line-umbrella)

**Property.** Aluminum and titanium powders ignite easily and react with water, and costly printers sit near combustible powder, resin and filament.

Loss drivers

## Where losses come from.

1. Fires and dust explosions from aluminum, titanium and polymer powders during depowdering, sieving and collection
2. Printed parts that fail in service after going into vehicles, aircraft, medical devices or machinery
3. Fires in print farms where dozens of heated printers run unattended overnight among plastic stock

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- 3D printing service bureaus, colored by its rating
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: High, 4 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Low, 1 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Elevated, 3 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Additive work is shifting from prototypes to certified production parts for aviation, medical and vehicle makers, raising product liability and recall severity.
- Cheaper metal printers and farms of desktop machines spread powder and unattended-fire hazards into small flex units with little protection.
- Recycled powders, new alloys and photopolymer resins arrive faster than test methods for them, leaving more judgment and liability with the bureau.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: High (4 of 5)

Aluminum and titanium powders ignite easily and react with water, and costly printers sit near combustible powder, resin and filament.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Metal powder handled in open air without inert gas or grounding
- Wet separators and filter cartridges left holding reactive sludge
- Print farms running dozens of desktop printers overnight unattended

**Controls that matter**

- Dedicated metal powder room with inerting, grounding and class D extinguishers
- Filters and separator sludge passivated and removed on a schedule
- Smoke detection and automatic power cut-off over printer banks

### Business interruption: Elevated (3 of 5)

Metal printers have long lead times, and parts qualified for aerospace or medical use are tied to specific machines.

Covers: How long and how costly a shutdown is.

**Watch for**

- Qualified production parts locked to one machine and parameter set
- Revenue concentrated in one or two industrial customers

**Controls that matter**

- Overflow agreements with other bureaus running the same machines
- Offline backups of build files and machine parameters

### Premises liability: Low (1 of 5)

Customers mostly upload files online; visitors are few and the shop does no work at customers' premises.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Walk-in counters, classes or open maker sessions on site

**Controls that matter**

- Visitors kept out of powder and post-processing areas

### Products and completed work: High (4 of 5)

Hidden porosity, weak layer bonding or the wrong material in printed end-use parts causes failures in vehicles, devices and machinery.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- End-use parts for aircraft, vehicles, medical devices, firearms or safety equipment
- Bureau choosing orientation, supports and settings without customer sign-off
- Recycled powder blended beyond the material maker's reuse limits

**Controls that matter**

- Contracts placing design and fitness for use on the customer
- Test coupons, density checks and build logs kept for every production lot
- Powder lot and reuse count recorded for each build

### Workers’ injury: Elevated (3 of 5)

Staff breathe fine metal and polymer powders, get dermatitis from uncured resin, and cut or burn themselves in finishing.

Covers: Injuries and illness to employees.

**Watch for**

- Depowdering by hand with brushes and compressed air
- Uncured resin parts washed in open solvent baths without gloves
- Argon or nitrogen piped to printers in rooms with no oxygen monitor

**Controls that matter**

- Enclosed depowdering stations with extraction and respirators
- Nitrile gloves, eye protection and closed wash stations for resin work
- Oxygen monitors with alarms wherever inert gas feeds the printers

### Commercial auto: Low (1 of 5)

Parts ship by parcel carrier; vehicle use is limited to occasional deliveries and errands.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Staff delivering urgent parts in their own cars

**Controls that matter**

- Hired and non-owned auto cover for staff who drive

### Crime and theft: Moderate (2 of 5)

Titanium and nickel alloy powders and compact printers have resale value, and invoice fraud targets large powder purchases.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Unsecured powder stock and desktop printers near loading doors

**Controls that matter**

- Locked powder store with weighed issue to each build

### Inland marine and equipment: Moderate (2 of 5)

Customer parts, prototypes and demonstration printers travel to trade shows and clients, and printed parts ship daily.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Printers taken to trade shows or placed at customer sites

**Controls that matter**

- Equipment floater listing printers that leave the premises

### Environmental: Moderate (2 of 5)

Uncured resin, wash solvents, spent powder and filter sludge are hazardous wastes produced in small volumes.

Covers: Pollution on or from the site or the work.

**Watch for**

- Resin wash solvent poured to drains or into general waste

**Controls that matter**

- Licensed collection of resin, solvent and powder waste

### Cyber and data: Elevated (3 of 5)

Customers upload confidential designs through online portals, and networked printers depend on files and licenses that ransomware locks.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Defense or export-controlled designs held without access controls
- Printers connected to the internet for remote monitoring by their makers

**Controls that matter**

- Encrypted file portal with access logs and deletion after each job
- Production network separated from office and guest networks

### Professional liability: Elevated (3 of 5)

Bureaus redesign parts for printing, recommend materials and settings, and reverse-engineer spares, so engineering errors become their liability.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Design, topology optimization or reverse engineering sold as a service
- Reverse-engineered replacement parts for machinery or vehicles

**Controls that matter**

- Design changes reviewed and signed off by a qualified engineer
- Written scope stating who approves design changes and material choices

### Umbrella and excess: Elevated (3 of 5)

A printed part failing in an aircraft, vehicle or implant, or a powder explosion in a shared building, can exceed primary limits.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Production parts for aviation, medical or vehicle safety uses
- Metal powder rooms in multi-tenant buildings

**Controls that matter**

- Acceptance testing and traceable certificates passed to the customer

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Usually leased light-industrial or flex units, often multi-tenant, with offices, drop ceilings and added rooms; metal printing needs a separate powder room and inert gas storage.
- **Occupancy**: Laser and binder printing of metal and polymer powders, resin printing and curing, filament print farms, sintering furnaces, some under hydrogen, and machining, blasting and finishing of parts.
- **Protection**: Sprinklers with a reviewed plan for water near reactive powders, detection and power cut-off over printer banks, class D extinguishers, inerted collectors and grounding.
- **Exposure**: Shared walls and roofs with unrelated tenants in flex buildings; a powder deflagration or print farm fire reaches neighbors quickly, and their fires reach costly printers.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What technologies are run, and which metal or polymer powders are handled on site?
- What share of output is prototypes versus end-use production parts, and for which industries?
- Does the bureau design, redesign or reverse-engineer parts, or only print customers' files?
- How many printers of each type run, and what are their replacement costs and lead times?
- Do any customer contracts accept design responsibility, warranties or consequential losses?

### Documents to request

- Loss runs for recent policy terms
- Combustible dust hazard analysis for powder handling
- Quality manual and sample build records with test results
- Standard terms of sale and largest customer contracts
- Schedule of printers and furnaces with replacement values

### On site: printing and powders

- Where are metal powders stored, sieved and loaded, and is that area inerted and grounded?
- How are depowdering, filter changes and separator cleaning done, and by whom?
- How many printers run unattended, and what detects and stops a fire overnight?

### On site: post-processing

- How are resin parts washed and cured, and where is the solvent kept?
- What machining, blasting or heat treatment is done on printed parts?
- What atmosphere do sintering and heat-treat furnaces use, and how are gas leaks detected?
- What extraction and protective equipment do workers use around powders?

### On site: quality and customers

- How are builds traced to powder lot, machine and settings?
- What testing confirms density and strength for production parts?
- Who approves design changes made to suit printing?

### On site: premises and data

- What shares walls with the powder room, and how is it separated?
- How are customer design files stored, shared and deleted?
- What does the loss history show for fires, injuries and part failures?

### Refer or decline if you find

- Metal powder handled without inerting, grounding or class D extinguishers
- Reactive filter sludge or wet separator waste stored indoors
- Print farm running unattended in a combustible room with no detection
- Flight, implant or vehicle safety parts printed without lot testing
- Contracts accepting design responsibility and unlimited consequential damages

Location

## How UrbanStat data helps.

Water reaching stored aluminum or titanium powder creates a reactive hazard, so floor-level flooding matters. Earthquake shaking knocks precision printers out of calibration, and wind-damaged roofs let rain onto costly machines.

Flood · Earthquake · Wind · Tornado

- Flood scores at the address show whether stored metal powders and floor-mounted printers sit in water's path, before setting property terms.
- Parcel and permit data give the building's construction date and permit history, a check on whether powder rooms and gas storage were permitted.
- Street-by-street exposure views show when insured bureaus and neighboring tenants build up value in one flex building, with alerts at a set threshold.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Earthquake · Wind · Tornado

Public loss data · NAICS 326199

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**2.8** recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

All other plastics product manufacturing

**2.8**

All private industry

**2.3**

0.9 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: All other plastics product manufacturing (NAICS 326199). Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**13** fatal work injuries in 2024.

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Other Plastics Product Manufacturing (NAICS 32619), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**1,008** citations from 312 inspections; 69% were classed serious, willful or repeat.

- 1910.147 The control of hazardous energy (lockout/tagout) **174**
- 1910.212 General requirements for all machines **76**
- 1910.134 Respiratory protection **58**
- 1910.1200 Hazard communication **55**
- 1910.178 Powered industrial trucks **47**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: All Other Plastics Product Manufacturing (NAICS 326199). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**443** facilities reported toxic chemical releases totaling **10.5 million pounds** on and off site.

- Styrene **8.7M**
- Methyl methacrylate **268,278**
- Toluene **201,989**

Chemicals released in the largest amounts, in pounds. 314 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: All Other Plastics Product Manufacturing (NAICS 326199). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Equipment breakdown**: Lasers, optics, chillers and controls on metal printers fail without fire and cost a great deal to repair.
- **Product recall**: A powder lot or parameter error can mean recalling printed parts already built into customers' products.
- **Aircraft products liability**: Parts supplied into aviation are excluded on many general liability forms and need specific cover.
- **Customers' goods in care**: Customer parts, fixtures and prototypes sent for printing or finishing sit on site and may be insured by no one.

## NAICS and SIC codes for 3d printing service bureaus

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [326199](https://www.urbanstat.com/industry-risk-guides/naics/#naics-326199) | All Other Plastics Product Manufacturing |
| NAICS 2022 | [332710](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332710) | Machine Shops |
| NAICS 2022 | [332117](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332117) | Powder Metallurgy Part Manufacturing |
| NAICS 2022 | [332999](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332999) | All Other Miscellaneous Fabricated Metal Product Manufacturing |
| NAICS 2022 | [541420](https://www.urbanstat.com/industry-risk-guides/naics/#naics-541420) | Industrial Design Services |
| SIC 1987, primary | [3089](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3089) | Plastics Products, NEC |
| SIC 1987 | [3599](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3599) | Industrial and Commercial Machinery and Equipment, NEC |
| SIC 1987 | [3499](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3499) | Fabricated Metal Products, NEC |

**Related business types**

- [Plastics molders and extruders NAICS 326199](https://www.urbanstat.com/industry-risk-guides/plastics-molders-and-extruders-naics-326199/)
- [Machine shops NAICS 332710](https://www.urbanstat.com/industry-risk-guides/machine-shops-naics-332710/)
- [Tool, die, mold and machine tool makers NAICS 333514](https://www.urbanstat.com/industry-risk-guides/tool-die-mold-and-machine-tool-makers-naics-333514/)
- [Dental laboratories NAICS 339116](https://www.urbanstat.com/industry-risk-guides/dental-laboratories-naics-339116/)
- [Forging and powder metal parts manufacturers NAICS 332111](https://www.urbanstat.com/industry-risk-guides/forging-and-powder-metal-parts-manufacturers-naics-332111/)
- [Compare 3D printing service bureaus with Plastics molders and extruders](https://www.urbanstat.com/industry-risk-guides/compare/?a=3d-printing-service-bureaus-naics-326199&b=plastics-molders-and-extruders-naics-326199)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/3d-printing-service-bureaus-naics-326199/

- Page: 3D printing service bureaus (NAICS 326199, SIC 3089): Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/3d-printing-service-bureaus-naics-326199/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
