Wire rope manufacturers and sling fabricators

Wire rope makers twist drawn wire into strands and close the strands around a core; fabricators cut rope and fit sockets, sleeves and eyes to make slings and assemblies. The product holds loads over people's heads, so one bad termination can kill.

Manufacturing · NAICS 332618 · SIC 3496 · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Slings, hoist ropes or terminations that fail under load and drop it

  2. 02

    Workers caught in stranding and closing machines or struck by recoiling rope

  3. 03

    Heated lubricant, socketing metal and fiber core fires in the plant

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Elevated, 3 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Synthetic fiber ropes and high-performance slings are replacing steel in some lifts, bringing new heat, cut and inspection hazards to the shop.
  • Cheaper imported rope and fittings compete on price, raising the chance that unverified hardware reaches slings sold under the insured's name.
  • Digital tags and inspection apps make traceability easier, but customers now expect the fabricator to track and remind them of inspections.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Elevated
Rope lubricants are heated and applied in bulk, fiber and plastic cores burn, and wooden reels fill the store.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Lubricant kettles heated by open flame or without temperature limits
  • Synthetic rope, webbing slings and wooden reels stored together
  • Molten zinc socketing done beside combustibles
Controls that matter
  • Thermostat and high-limit cut-outs on lubricant heaters
  • Sprinklers over reel and synthetic sling storage
  • Dedicated, noncombustible socketing area

Business interruption

Elevated
Large closing machines and test beds are slow to replace, though sling shops can buy rope and keep trading.

How long and how costly a shutdown is.

Watch for
  • One closer able to make the largest diameters
  • Single source of wire or imported rope
Controls that matter
  • Stock of finished rope and fittings at a second location
  • Alternative suppliers approved in advance

Premises liability

Moderate
Customers visit trade counters, and some fabricators inspect or install rope on customers' cranes and sites.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • On-site sling inspection or crane rope installation services
  • Rigging training offered to customers
Controls that matter
  • Written scope and qualified inspectors for field services
  • Counter area separated from the shop floor

Products and completed work

High
Every sling and rope is a lifting or holding device; a slipped sleeve or wrong rating tag drops loads on people.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Imported rope or fittings relabeled under the insured's name
  • Assemblies for elevators, cranes, ski lifts, stage rigging or fall protection
  • Slings sold without proof testing or rating tags
Controls that matter
  • Proof testing of assemblies with certificates tied to serial numbers
  • Swaging dies and presses checked and gauged on a schedule
  • Mill certificates and batch traceability for all rope and fittings

Workers’ injury

High
Rotating cradles and bobbins, tensioned rope, heavy reels and broken wire ends cause entanglement, crush and puncture injuries.

Injuries and illness to employees.

Watch for
  • Stranders and closers running with gates open
  • Proof test bed without a guarded enclosure
  • Hand splicing and cutting with abrasive wheels
Controls that matter
  • Interlocked perimeter guarding on stranding and closing machines
  • Enclosed test bed with operators behind a barrier
  • Cut-resistant gloves, eye protection and reel-handling equipment

Commercial auto

Moderate
Counter sales and local deliveries of reels and slings by pickup or light truck.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Heavy reels carried on light vehicles
  • Mobile service trucks visiting job sites
Controls that matter
  • Reels blocked and chained, with driver records reviewed

Crime and theft

Low
Steel rope and fittings have modest resale value and are awkward to steal.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Stainless and specialty fittings in open bins by the counter
Controls that matter
  • Stock control and cameras at the trade counter

Inland marine and equipment

Moderate
Customers' slings come in for inspection and recertification, and reels move to job sites.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Customers' rigging held for repair with no record of condition
  • Service trucks carrying presses and test gear
Controls that matter
  • Tagged receiving records for customers' gear
  • Scheduled cover for mobile swaging and test equipment

Environmental

Moderate
Sling shops use lubricants, solvents and socketing zinc or resin in small amounts; plants drawing their own wire add acids and lead.

Pollution on or from the site or the work.

Watch for
  • Lubricant drips and spills soaking into floors and soil
  • Solvent degreasing of rope ends
  • Wire drawing with acid pickling, lead patenting or galvanizing on site
Controls that matter
  • Drip trays, diked lubricant storage and licensed waste collection
  • Acid, lead and zinc areas on sealed, diked floors with air monitoring

Cyber and data

Moderate
Certificates, test records and orders sit on business systems; losing them stops shipping because slings cannot leave without paperwork.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Test certificates stored only on a local server with no backup
Controls that matter
  • Off-site backups of test and certificate records, with restores tested

Professional liability

Elevated
Periodic sling and crane rope inspections, recertification and rigging training are judgments customers rely on to keep gear in service.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Field inspectors passing slings or hoist ropes without written criteria
  • Rigging training or lift planning sold to customers
Controls that matter
  • Qualified inspectors using written discard criteria, with photos kept
  • Training records and course content kept for each class

Umbrella and excess

High
A failed hoist rope, elevator rope or sling can drop a load onto people below, causing deaths that exceed primary limits.

How likely one liability event is to exhaust primary limits.

Watch for
  • Ropes for elevators, ski lifts, stage rigging or personnel hoisting
Controls that matter
  • Limits set by the most severe end use, with excess layers arranged
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Single-story steel-framed plants and shops with heavy floors and overhead cranes for reels; sling shops often occupy older industrial units with an attached trade counter.
Occupancy
Stranding and closing machines, heated lubricant kettles, molten zinc or resin socketing, swaging presses and proof test beds, with wooden reels and synthetic slings in store.
Protection
Sprinklers over reel and synthetic sling storage, temperature limits on lubricant heaters, a noncombustible socketing area, enclosed test beds and a monitored alarm.
Exposure
Plants sit in port, oilfield and industrial districts beside other heavy users; reels stored in open yards are exposed to grass fires, storms and theft.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: products and services

On site: quality control

On site: plant and people

Refer or decline if you find

  • Slings shipped without proof test or rating tag
  • Imported rope resold with no mill certificates
  • Test bed in the open shop with no enclosure
  • No traceability between assemblies and material batches
05 / Location

How UrbanStat data helps.

Shops serve ports, oilfields, mines and construction hubs, often on low industrial land. Flood water rusts rope and fittings quickly, and reels kept in open yards are exposed to storms and theft.

FloodWindTornadoCrime
  • Flood scores at the address show whether rope stock, fittings and test equipment kept at floor level are exposed to water that ruins them through corrosion.
  • Parcel and permit data give the building's age and permit history, a prompt to ask whether sprinklers kept pace with wooden reel and synthetic sling storage.
  • The risk analysis API returns peril scores in seconds, letting a rigging shop submission be screened for flood, wind and crime inside the quoting workflow.
Flood · Wind · Tornado · Crime
06 / Public loss data

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

3.2 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Spring and wire product manufacturing
3.2
All private industry
2.3

0.8 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Spring and wire product manufacturing (NAICS 33261), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

46 fatal work injuries in 2024, most often from contact with objects and equipment (13).

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Fabricated Metal Product Manufacturing (NAICS 332), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

98 citations from 36 inspections; 61% were classed serious, willful or repeat.

  • 1910.212 General requirements for all machines
    12
  • 1910.147 The control of hazardous energy (lockout/tagout)
    11
  • 1910.1200 Hazard communication
    10
  • 1910.134 Respiratory protection
    5
  • 1910.178 Powered industrial trucks
    3

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Other Fabricated Wire Product Manufacturing (NAICS 332618). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

45 facilities reported toxic chemical releases totaling 254,271 pounds on and off site.

  • Zinc compounds
    179,397
  • Certain glycol ethers
    47,684
  • Manganese and manganese compounds
    8,103

Chemicals released in the largest amounts, in pounds. 23 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Other Fabricated Wire Product Manufacturing (NAICS 332618). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Product recall
A bad batch of sleeves, hooks or rope means tracing and withdrawing slings already in customers' service.
Equipment breakdown
A failed closing machine drive or test bed hydraulics stops the largest rope sizes for months.
Classification
SystemCodeIndustry
NAICS 2022, primary332618Other Fabricated Wire Product Manufacturing
NAICS 2022331222Steel Wire Drawing
NAICS 2022423510Metal Service Centers and Other Metal Merchant Wholesalers
SIC 1987, primary3496Miscellaneous Fabricated Wire Products
SIC 19873315Steel Wiredrawing and Steel Nails and Spikes
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →