Wire and cable manufacturers
Wire manufacturers clean metal rod, pull it through a series of dies to the required diameter, then anneal, coat, insulate or form it into cable, mesh, fencing or springs. Machines run fast with long lengths under tension, lubricants and furnaces are everywhere, and copper stock draws thieves.
Where losses come from.
- 01
Hands and arms caught in draw blocks, capstans and spoolers, and breaking wire whipping operators
- 02
Fires in annealing furnaces, enameling ovens, lubricant systems and plastic insulation lines
- 03
Theft of copper rod, wire and scrap
- PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Elevated, 3 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
- Grid upgrades, electric vehicles and data centers drive demand for copper and aluminum cable, raising stock values held and theft pressure on yards.
- Aluminum is replacing copper in more building and vehicle wiring, shifting fire and product exposure toward connection and termination failures.
- Fiber optic and data cable lines are growing, and automated reel handling and vision inspection cut manual handling but add networked controls.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ElevatedAnnealing furnaces, drawing lubricants, plastic insulation and solvent enamels add fuel, and burning PVC sends corrosive smoke through the machinery.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Magnet wire enameling ovens using solvent-based varnish
- Plastic insulation compounds and wooden reels stored in bulk
- Oil quench or molten lead and salt baths on steel wire lines
- Solvent vapor monitoring and explosion relief on enameling ovens
- Sprinklers over reel, compound and finished cable storage
- Furnace combustion safeguards tested on schedule
Business interruption
ElevatedLines are long and specialized, but most plants run several in parallel and dies are quickly replaced.
How long and how costly a shutdown is.
- One rod breakdown machine or one furnace feeding every line
- Sole supplier of rod or insulation compound
- Spare motors, gearboxes and drives for the critical machines
- Second approved source for rod
Premises liability
LowNo public access; visitors are limited to carriers and service contractors.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Drivers loading heavy coils and reels in the yard
- Loading done by trained staff with drivers standing clear
Products and completed work
ElevatedWire ends up in electrical circuits, springs, fasteners, tire cord and concrete; undersize or brittle wire fails in service.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Building wire and cable where insulation faults cause fires
- Prestressing strand, spring wire or medical and aerospace wire
- Imported rod of uncertain chemistry
- Tensile, diameter and insulation tests on every production lot
- Coil-level traceability back to the rod heat
- Certification of electrical products by an accredited test laboratory
Workers’ injury
HighOperators thread and tend fast rotating blocks and spools; entanglement, lacerations, flying wire ends and heavy coils injure often.
Injuries and illness to employees.
- Stringing-up or clearing snarls with the machine in motion
- Guards removed from draw blocks and take-ups
- Acid cleaning houses with manual dipping
- Interlocked guards and jog-only controls for threading
- Eye and face protection with enclosures around payoffs and take-ups
- Mechanical coil handling and tested emergency stops
Commercial auto
ModerateShipping is largely by outside carrier; some plants deliver reels on their own trucks.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Own trucks carrying heavy reels and coils
- Reels chocked and strapped, with driver records checked
Crime and theft
ElevatedCopper and aluminum rod, finished wire and scrap are easy to sell and worth stealing by the truckload.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Copper scrap bins and reels kept outdoors
- Stock records that cannot reconcile metal in against metal out
- Whole-truck pickups released on unverified paperwork
- Indoor, caged storage for copper with alarmed and camera-covered docks
- Weigh-in and weigh-out reconciliation of metal and scrap
- Carrier and driver identity checks before release
Inland marine and equipment
ModerateNonferrous loads are dense and valuable, and some customers' reels and materials are held on site.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Full truckloads of copper wire in transit
- Toll processing of customers' metal
- Transit limits matched to the value of a copper load
- Vetted carriers and no unattended overnight parking
Environmental
ElevatedPickling acids, coating baths, drawing soaps, oils and enamel solvents generate regulated waste and emissions.
Pollution on or from the site or the work.
- Acid pickling instead of mechanical descaling
- Molten lead baths or zinc coating lines
- Older sites with solvent degreasing history
- Neutralization and licensed disposal of spent acid and sludge
- Thermal oxidizers on enameling exhaust
- Diked chemical storage and sealed floors
Cyber and data
ElevatedDrawing, insulating and test lines run on networked controls, and order systems drive tight reel shipments; ransomware stops both.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Line controls and test data reachable from office systems
- Remote vendor access to extruders and drawing machines left always on
- Segmented plant network with vendor access granted per session
- Offline backups of recipes, test records and order data
Professional liability
ModerateCustom cable constructions and spring designs are often engineered to a customer's application, so a rating or design error becomes an advice claim.
Loss or injury caused by advice, design, testing, care or another professional service.
- Design engineering offered for customers' cable or spring applications
- Ratings or test claims printed on own-brand products
- Customer sign-off on drawings, ratings and intended use
- Design reviews documented before first production
Umbrella and excess
HighFaulty building wire can start fires in many homes at once, and brittle strand or springs fail inside structures and vehicles.
How likely one liability event is to exhaust primary limits.
- Building wire, power cable or prestressing strand sold in volume
- Springs for vehicle suspensions, seats or safety devices
- Lot traceability that supports a targeted recall
- Independent certification before electrical products are sold
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Long, low steel-frame buildings with machine pits under drawing lines, large roof spans over reel storage, and separate acid cleaning, galvanizing or enameling areas.
- Occupancy
- High-speed drawing with oil and soap lubricants, annealing furnaces and molten baths, plastic compound extruders, solvent enamel ovens and bulk storage of wooden and plastic reels.
- Protection
- Sprinklers throughout including reel and compound storage, combustion safeguards on furnaces and ovens, solvent vapor monitoring, caged copper stores and monitored intruder alarms.
- Exposure
- Industrial parks with rail or highway access; outdoor reel yards and scrap bins invite theft, and neighbors may be other plants sharing walls or drainage.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: products and process
On site: plant and fire protection
On site: people and machines
On site: security and records
Refer or decline if you find
- Machines threaded at running speed with guards open
- Copper stock or scrap stored outdoors unsecured
- Enameling ovens without solvent vapor monitoring
- Electrical wire sold without independent certification
How UrbanStat data helps.
Copper stock makes neighborhood crime the first question. Long, low buildings with pits under drawing lines take in flood water, and large roof spans over reel storage are vulnerable to wind and tornado.
- Crime scores at the address indicate how exposed copper rod, finished reels and scrap bins are to organized theft before stock limits are agreed.
- Flood scores at the address show whether machine pits, motor rooms and floor-stored coils sit in water's path.
- Underwriting rules drawn as areas on the map apply theft referral criteria automatically to nonferrous wire plants at new business and renewal.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
4.3 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.
2.1 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Steel wire drawing (NAICS 331222). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
1 fatal work injury in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Rolling and Drawing of Purchased Steel (NAICS 33122), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
33 citations from 13 inspections; 64% were classed serious, willful or repeat.
- 1910.212 General requirements for all machines4
- 1910.147 The control of hazardous energy (lockout/tagout)3
- 1910.335 Safeguards for personnel protection3
- 1910.1025 Lead3
- 1910.219 Mechanical power-transmission apparatus2
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Steel Wire Drawing (NAICS 331222). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
52 facilities reported toxic chemical releases totaling 518,357 pounds on and off site.
- Zinc compounds228,324
- Nitrate compounds106,748
- Lead and lead compounds34,218
Chemicals released in the largest amounts, in pounds. 30 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Steel Wire Drawing (NAICS 331222). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Equipment breakdown
- Rod breakdown machines, extruders, furnaces and drives fail mechanically and stop whole lines.
- Stock throughput
- Copper and finished reels move between plant, outside processors and customers, so values swing and travel.
- Product recall
- A bad lot of building wire or springs may need finding and removing from many installed products.
- Site pollution liability
- Pickling acids, lead and zinc baths and old degreasing solvents leave soil and groundwater contamination.
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 331222 | Steel Wire Drawing |
| NAICS 2022 | 335929 | Other Communication and Energy Wire Manufacturing |
| NAICS 2022 | 331420 | Copper Rolling, Drawing, Extruding, and Alloying |
| NAICS 2022 | 332618 | Other Fabricated Wire Product Manufacturing |
| NAICS 2022 | 331318 | Other Aluminum Rolling, Drawing, and Extruding |
| NAICS 2022 | 331491 | Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding |
| NAICS 2022 | 335921 | Fiber Optic Cable Manufacturing |
| NAICS 2022 | 332613 | Spring Manufacturing |
| SIC 1987, primary | 3315 | Steel Wiredrawing and Steel Nails and Spikes |
| SIC 1987 | 3357 | Drawing and Insulating of Nonferrous Wire |
| SIC 1987 | 3496 | Miscellaneous Fabricated Wire Products |
| SIC 1987 | 3495 | Wire Springs |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.