Riggers and machinery movers

Riggers move heavy or awkward loads such as presses, transformers, chillers and process vessels using slings, jacks, skates and gantries, often alongside a hired crane or a heavy hauler. They take charge of other people's high-value property at the moment it is most likely to be dropped.

Construction · NAICS 238290 · SIC 1796 · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Loads dropped, tipped or struck during lifting, jacking and skating

  2. 02

    Crush injuries to riggers caught between the load and structure

  3. 03

    Damage to customers' floors, buildings and neighboring machinery during moves

How it comparesEach line’s rating against the average for its NAICS sector, Construction (49 business types), and for all 747.
  1. PropertyProperty: Moderate, 2 of 5; sector average 2.2; all business types 2.9.
  2. Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 1.8; all business types 2.7.
  3. Premises liabilityPremises liability: High, 4 of 5; sector average 3.5; all business types 2.7.
  4. Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 3.8; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.8; all business types 3.0.
  6. Commercial autoCommercial auto: Elevated, 3 of 5; sector average 3.1; all business types 2.5.
  7. Crime and theftCrime and theft: Low, 1 of 5; sector average 1.7; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Severe, 5 of 5; sector average 3.2; all business types 2.6.
  9. EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.5; all business types 2.3.
  10. Cyber and dataCyber and data: Low, 1 of 5; sector average 2.0; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 2.3; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 4.0; all business types 3.6.
What’s changing
  • Data centers, battery plants and hospital imaging rooms bring frequent moves of very high-value, sensitive equipment, raising the value of a single dropped load.
  • Hydraulic gantries, remote-controlled skates and load-monitoring shackles cut hands-on exposure, but crews must be trained on each new system.
  • Customers push more consequential-loss and downtime liability onto riggers in contracts, while larger verdicts make each bystander injury costlier.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Moderate
A shop and yard store slings, gantries, forklifts and sometimes customers' machinery between moves.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Customers' machines stored in the rigger's building for weeks
  • Fuel and oxy-fuel cutting gear kept among stored equipment
Controls that matter
  • Stored customer property logged with values and agreed terms
  • Cylinders and fuel segregated from storage areas

Business interruption

Moderate
Gantries, jacks and forklifts are specialized but rentable; experienced crews are the scarce resource.

How long and how costly a shutdown is.

Watch for
  • A handful of senior riggers holding all the planning knowledge
Controls that matter
  • Cross-trained foremen and equipment rental relationships

Premises liability

High
Heavy loads are moved inside working plants and over public areas, where a slip damages buildings and injures bystanders.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Moves inside occupied factories, hospitals or data centers
  • Rooftop lifts over streets and neighboring buildings
  • Floors and mezzanines of unknown load capacity
Controls that matter
  • Written rigging plan with weights, center of gravity and travel path
  • Floor loading confirmed by the owner's engineer
  • Barricaded exclusion zones and a single signal person

Products and completed work

Elevated
Machinery set out of level, poorly anchored or secured wrongly for transport fails after the rigger has left.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Loads blocked and chained for road transport by the rigger
  • Installation and alignment offered as part of the move
Controls that matter
  • Sign-off with the owner or millwright after setting
  • Securement to the carrier's written requirements, with photos

Workers’ injury

High
Hands, feet and bodies are close to shifting loads of many tons, often at height or in cramped plant rooms.

Injuries and illness to employees.

Watch for
  • Riggers riding or steadying loads by hand
  • Jacking and cribbing on uneven or soft surfaces
  • Temporary crews brought in for big jobs
Controls that matter
  • Tag lines and push sticks so no one touches a suspended load
  • Qualified riggers and signal persons on every lift
  • Pre-lift briefing with stop authority for all crew

Commercial auto

Elevated
Trucks carry rigging gear, forklifts and gantries to sites; some firms also haul the loads themselves.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Oversize hauling done in-house without a specialized carrier
  • Forklifts and gantries moved on undersized trailers
Controls that matter
  • Permits and route surveys for heavy moves
  • Driver qualification and tie-down training

Crime and theft

Low
No cash or resale stock; rigging hardware, batteries and forklifts in the yard are the only draw.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Rigging gear and scrap stored in open yards
Controls that matter
  • Locked containers and a fenced, lit yard

Inland marine and equipment

Severe
The customer's machine on the hook or skates may be worth a fortune and take a year to replace.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Load values above the riggers' liability limit
  • Contracts accepting consequential loss for the customer's downtime
  • One-off or prototype machinery with no replacement
Controls that matter
  • Declared value obtained in writing before each job
  • Contract terms limiting liability to an agreed amount
  • Slings, shackles and hoists inspected, tagged and retired on schedule

Environmental

Moderate
Machines moved often hold oil, coolant or refrigerant that spills when lines are cut or a unit tips.

Pollution on or from the site or the work.

Watch for
  • Transformers and old capacitors with contaminated oil
  • Machines moved without draining fluids
Controls that matter
  • Fluids drained and lines capped by the owner before the move
  • Spill kits and drip trays carried on every job

Cyber and data

Low
Records are mostly payroll, invoices and lift plans; an outage delays planning but rarely stops crews already on site.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Customer facility drawings for data centers or hospitals held insecurely
Controls that matter
  • Customer drawings stored on a managed system with limited access

Professional liability

Moderate
Rigging plans, load calculations and floor capacity checks are relied on by customers; errors show up as dropped or damaged loads.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Engineered lift or jacking plans prepared in-house without a licensed engineer
  • Plant relocation planning or project management sold as a service
Controls that matter
  • Engineer review of critical lift, jacking and floor-load plans
  • Scope of planning responsibility set out in each contract

Umbrella and excess

High
A load or hired crane falling into a street, an occupied floor or a neighbor's building can kill bystanders.

How likely one liability event is to exhaust primary limits.

Watch for
  • Rooftop picks over public streets in dense city blocks
  • Moves inside hospitals, data centers or occupied offices
Controls that matter
  • Street closures and exclusion zones agreed with the local authority
  • Limits matched to the most valuable building or load worked near
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
A high-bay steel or masonry warehouse with a fenced yard, sized to store gantries, forklifts, skates and customers' machinery between moves.
Occupancy
Storage of rigging gear and crated machinery, forklift fueling and charging, and oxy-fuel cutting for crating and repairs; little process fire load otherwise.
Protection
Sprinklers or monitored detection where customers' machinery is stored, separated cylinder and fuel storage, a lit and fenced yard and an intrusion alarm.
Exposure
The shop adds little; the exposure is at job sites, where loads cross busy streets, fragile floors and neighboring buildings.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: work performed

On site: planning

On site: gear and people

On site: contracts and history

Refer or decline if you find

  • Load values routinely unknown before the lift
  • Contracts accepting unlimited or consequential liability
  • No inspection tags or records on slings and hardware
  • Critical lifts without a written plan
  • Customers' machinery stored long-term with no agreed terms
05 / Location

How UrbanStat data helps.

Outdoor and rooftop lifts are stopped or upset by wind. Customers' machinery staged in the rigger's yard or at a job site awaiting installation is exposed to flood, earthquake and theft while in the rigger's care.

WindFloodEarthquakeCrime
  • Wind scores at the lift address show how exposed a rooftop or open-yard lift is before the job is accepted.
  • Flood and earthquake scores at the storage yard show what customers' machinery faces while it waits in the rigger's care.
  • Street-by-street exposure views show insured value clustered around a customer plant where a move is planned, with alerts above a set threshold.
Wind · Flood · Earthquake · Crime
06 / Public loss data

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

1.4 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.

Other building equipment contractors
1.4
All private industry
2.3

0.8 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Other building equipment contractors (NAICS 23829), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

6 fatal work injuries in 2024, most often from contact with objects and equipment (3).

Construction
9.2
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Other Building Equipment Contractors (NAICS 23829), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

172 citations from 59 inspections; 55% were classed serious, willful or repeat.

  • 1926.451 General requirements (scaffolds)
    8
  • 1910.134 Respiratory protection
    8
  • 1910.178 Powered industrial trucks
    7
  • 1910.95 Occupational noise exposure
    7
  • 1910.1200 Hazard communication
    7

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Other Building Equipment Contractors (NAICS 238290). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Riggers' liability
Damage to the customer's machine while it is being lifted or moved is excluded from general liability.
Warehouse legal liability
Customers' machinery stored in the rigger's building between moves needs its own cover and agreed terms.
Motor truck cargo
Loads the firm hauls on its own trailers are cargo, not rigging, once the truck leaves the site.
Contractors' pollution liability
Transformers and machines tipped or cut free during moves leak oil, coolant and refrigerant into floors and drains.
Classification
SystemCodeIndustry
NAICS 2022, primary238290Other Building Equipment Contractors
NAICS 2022238990All Other Specialty Trade Contractors
SIC 1987, primary1796Installation or Erection of Building Equipment, NEC
SIC 19871799Special Trade Contractors, NEC
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →