Millwrights

Millwrights dismantle, move, install, align and maintain production machinery, conveyors, turbines and pumps inside other companies' plants. They lift and skate multi-ton equipment through working factories, cut and weld in place, and hand back machines whose guards, anchors and alignment decide whether they run safely.

Construction · NAICS 238290 · SIC 1796 · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Crush and struck-by injuries while jacking, skating and lifting heavy machinery

  2. 02

    Customer machinery dropped, tipped or damaged while in the millwright's hands

  3. 03

    Hot work fires and production stoppages inside customers' plants

How it comparesEach line’s rating against the average for its NAICS sector, Construction (49 business types), and for all 747.
  1. PropertyProperty: Moderate, 2 of 5; sector average 2.2; all business types 2.9.
  2. Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 1.8; all business types 2.7.
  3. Premises liabilityPremises liability: High, 4 of 5; sector average 3.5; all business types 2.7.
  4. Products and completed workProducts and completed work: High, 4 of 5; sector average 3.8; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.8; all business types 3.0.
  6. Commercial autoCommercial auto: Elevated, 3 of 5; sector average 3.1; all business types 2.5.
  7. Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.7; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: High, 4 of 5; sector average 3.2; all business types 2.6.
  9. EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.5; all business types 2.3.
  10. Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.0; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 2.3; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 4.0; all business types 3.6.
What’s changing
  • Factory automation and robot cells bring more relocation and integration work, with tighter tolerances and guarding that must be proven at handover.
  • Plants now schedule shorter, denser shutdowns, so crews work long shifts beside other contractors, which raises fatigue injuries and hot-work fire risk.
  • Laser trackers and vibration sensors give documented alignment and condition records, which strengthen the defense when a machine fails after handover.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Moderate
The shop holds rigging gear, forklifts, welders and some fabrication; steel-heavy contents and a modest fire load.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Welding and cutting in the shop beside paint, oils or crated customer equipment
  • Customer machinery stored at the shop between jobs
Controls that matter
  • Marked hot-work area kept clear of combustibles
  • Values of customer equipment on the premises reported and insured

Business interruption

Moderate
Income is earned at customers' sites, but a shop loss can strand specialized rigging gear needed for scheduled shutdowns.

How long and how costly a shutdown is.

Watch for
  • Shutdown and turnaround contracts with penalties for late completion
  • One gantry or heavy forklift that every large job depends on
Controls that matter
  • Rental sources lined up for lifts, gantries and skates
  • Contracts that limit delay damages

Premises liability

High
Crews cut, weld and move heavy loads inside live plants, where a dropped machine or a fire stops the customer's whole line.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Hot work near dust collectors, oil mist, plastics or insulated panels
  • Lifts made over running production lines or occupied areas
  • Contracts accepting the customer's loss of production
Controls that matter
  • Hot-work permits with fire watch, issued jointly with the plant
  • Written lift plans for critical picks, with floor loading checked
  • Hold-harmless and consequential-loss wording reviewed before signing

Products and completed work

High
A machine left misaligned, badly anchored or without guards and interlocks injures operators or wrecks itself after start-up.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Guards, light curtains or interlocks removed for installation and not refitted
  • Conveyors or platforms designed and fabricated in-house
  • Used machinery relocated and recommissioned without the maker's documentation
Controls that matter
  • Commissioning checklist signed by the customer, covering guards and emergency stops
  • Laser alignment and anchor torque records kept for each machine
  • Engineer-stamped drawings for structural or conveyor design

Workers’ injury

High
Workers handle multi-ton loads in tight spaces, weld, climb and enter machinery, often on long shutdown shifts in unfamiliar plants.

Injuries and illness to employees.

Watch for
  • Jacking and skating loads with improvised blocking
  • Work on equipment not fully isolated from power, air or stored energy
  • Long shutdown shifts with fatigue and temporary hires
Controls that matter
  • Lockout verified by the millwright's own lock on each energy source
  • Qualified riggers and signalers; rated slings inspected before use
  • Confined space and fall protection procedures agreed with the host plant

Commercial auto

Elevated
Service trucks, flatbeds and trailers haul rigging gear and sometimes the customer's machinery between plants.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Oversize or top-heavy machinery hauled on the firm's own trailers
  • Long drives home after extended shutdown shifts
Controls that matter
  • Load securement training and permits for oversize moves
  • Heavy hauls given to specialized carriers

Crime and theft

Moderate
Tools, alignment instruments and rigging are valuable and portable, but little cash is handled.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Laser alignment kits and welders left in trucks at hotels during travel jobs
Controls that matter
  • Serial-numbered tool inventory and locked storage on trucks and at sites

Inland marine and equipment

High
The firm takes custody of customers' machinery while moving it, and its own gantries, forklifts and jacks live on job sites.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Single machines worth more than the riggers' liability limit
  • New equipment received and stored on site before installation
  • Borrowed or rented cranes and lifts operated by the firm's crew
Controls that matter
  • Value of each item moved declared before the job and limits adjusted
  • Installation and riggers' liability cover written for the largest lift
  • Rented equipment insured as the rental contract requires

Environmental

Moderate
Draining hydraulic oil, coolant and lubricants from old machines causes spills, usually small and inside the plant.

Pollution on or from the site or the work.

Watch for
  • Decommissioning of old transformers, presses or tanks with unknown fluids
  • Cutting or grinding surfaces coated in lead paint
Controls that matter
  • Fluids drained into containers and handed to the customer's waste system
  • Spill kits on every truck

Cyber and data

Moderate
Crews plug laptops into customers' machine controls during commissioning, and the firm holds drawings and plant layouts customers treat as confidential.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Technicians' laptops connected to plant control networks without checks
  • Customer drawings shared through personal email or messaging apps
Controls that matter
  • Dedicated, patched commissioning laptops scanned before connecting to customer systems
  • Project files kept on a managed system with access by job

Professional liability

Moderate
Most work follows the owner's or maker's design, but lift plans, foundation advice and alignment reports are relied on by customers.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Conveyors, platforms or machine bases designed in-house without an engineer
  • Line layout or relocation planning sold as a consulting service
Controls that matter
  • Licensed engineer's stamp on structural, foundation and conveyor designs
  • Design scope and responsibilities stated in writing for each job

Umbrella and excess

High
A hot-work fire that burns a customer's plant or a machine failure that kills operators can far exceed primary limits.

How likely one liability event is to exhaust primary limits.

Watch for
  • Work in food, chemical or paper plants with high fire loads
  • Contracts requiring high limits and waiver of the customer's own insurance
Controls that matter
  • Limits matched to the largest plant value worked in
  • Hot-work and lift rules enforced the same way on every shutdown
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
A steel or masonry shop with high bays, overhead cranes and a fenced yard, often in an older industrial district near the plants it serves.
Occupancy
Welding, cutting and machining of bases and guards, forklift charging and storage of rigging gear and customers' machinery; most hours are worked inside customers' plants.
Protection
A marked hot-work area, fire extinguishers at each welding station, separated battery charging, monitored alarms and sprinklers where stored machinery or crating adds combustibles.
Exposure
The shop's neighbors matter less than the customers' plants, where crews work beside dust collectors, oil mist, process heat and running lines.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: work performed

On site: job sites

On site: equipment and vehicles

On site: records and history

Refer or decline if you find

  • Contracts accepting unlimited liability for the customer's downtime
  • Critical lifts made without a written plan or qualified rigger
  • Hot work in customers' plants with no permit or fire watch
  • Machines handed back with guards or interlocks missing
  • Values handled far above the riggers' liability limit
05 / Location

How UrbanStat data helps.

The shop matters less than where customers' plants are. Machinery awaiting installation sits on job sites exposed to flood, wind and earthquake, and service trucks loaded with instruments are targets wherever crews stay overnight.

FloodEarthquakeWindCrime
  • Flood and earthquake scores at each customer plant show the exposure to machinery in the firm's care during installation, before the installation limit is agreed.
  • Street-by-street exposure views show whether several insured projects and plants cluster in one industrial area, with alerts when the total passes a set threshold.
  • Crime scores at the shop address inform theft terms for rigging gear, welders and alignment instruments.
Flood · Earthquake · Wind · Crime
06 / Public loss data

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

1.4 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.

Other building equipment contractors
1.4
All private industry
2.3

0.8 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Other building equipment contractors (NAICS 23829), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

6 fatal work injuries in 2024, most often from contact with objects and equipment (3).

Construction
9.2
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Other Building Equipment Contractors (NAICS 23829), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

172 citations from 59 inspections; 55% were classed serious, willful or repeat.

  • 1926.451 General requirements (scaffolds)
    8
  • 1910.134 Respiratory protection
    8
  • 1910.178 Powered industrial trucks
    7
  • 1910.95 Occupational noise exposure
    7
  • 1910.1200 Hazard communication
    7

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Other Building Equipment Contractors (NAICS 238290). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Toxic chemical releases

10 facilities reported toxic chemical releases totaling 9,986 pounds on and off site.

  • Certain glycol ethers
    4,020
  • Nitrate compounds
    3,716
  • Manganese
    869

Chemicals released in the largest amounts, in pounds. 2 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance (NAICS 811310). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Riggers' liability
Customers' machinery being lifted or moved is in the firm's care, where general liability excludes the damage.
Installation floater
New machinery received and stored on site before commissioning is at risk until the customer accepts it.
Contractors' pollution liability
Hydraulic oil, coolant and unknown fluids drained from old machines can spill into plant drains and soil.
Rented equipment
Cranes, aerial lifts and gantries rented for shutdowns must be insured as the rental contract requires.
Classification
SystemCodeIndustry
NAICS 2022, primary238290Other Building Equipment Contractors
NAICS 2022811310Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
SIC 1987, primary1796Installation or Erection of Building Equipment, NEC
SIC 19877699Repair Shops and Related Services, NEC
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →