Iron and steel erection contractors
Steel erectors hoist, set, bolt and weld the frames of buildings, bridges and plants, and many also place rebar, set precast concrete or install stairs, rails and decking. Work at height on a frame not yet stable makes falls, dropped loads and collapse the defining exposures, on site and after completion.
Where losses come from.
- 01
Falls from beams, decking and columns before the frame is fully connected
- 02
Partial collapse during erection from missing bracing, guying or anchor bolts
- 03
Connection or weld failures discovered after the structure is loaded
- PropertyProperty: Moderate, 2 of 5; sector average 2.2; all business types 2.9.
- Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 1.8; all business types 2.7.
- Premises liabilityPremises liability: High, 4 of 5; sector average 3.5; all business types 2.7.
- Products and completed workProducts and completed work: Severe, 5 of 5; sector average 3.8; all business types 2.6.
- Workers’ injuryWorkers’ injury: Severe, 5 of 5; sector average 3.8; all business types 3.0.
- Commercial autoCommercial auto: Elevated, 3 of 5; sector average 3.1; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.7; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: High, 4 of 5; sector average 3.2; all business types 2.6.
- EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.5; all business types 2.3.
- Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.0; all business types 2.7.
- Professional liabilityProfessional liability: Elevated, 3 of 5; sector average 2.3; all business types 2.0.
- Umbrella and excessUmbrella and excess: Severe, 5 of 5; sector average 4.0; all business types 3.6.
- Larger modular units, longer spans and taller frames mean heavier picks and tighter sequencing, raising the cost of any dropped load or collapse.
- Delegated connection design and fast-track schedules shift more engineering onto erectors, widening completed-work and design claims when a connection fails.
- Self-retracting lifelines, remote-release rigging, drones and site cameras cut fall exposure and improve records, though a shortage of experienced connectors raises turnover.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ModerateOwn premises are usually a yard and small shop of noncombustible steel; the fire load is cutting gases, fuel and paint.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Shop fabrication with painting or coating on site
- Oxygen and fuel gas cylinders stored together or unsecured
- Cylinders chained, capped and separated by gas type
- Hot work kept clear of paint and fuel storage
Business interruption
ModerateRevenue depends on cranes and key crews, not on a building; a crane loss or site shutdown delays contracts.
How long and how costly a shutdown is.
- One crane or one foreman carrying most of the workload
- Contracts with liquidated damages for late completion
- Rental agreements in place for replacement cranes
- Schedules with float agreed with the general contractor
Premises liability
HighLoads swing over other trades and the public, and sparks from welding and cutting start fires in buildings under construction.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Lifts over occupied buildings, streets or active rail
- Renovation work inside operating plants or occupied structures
- Contracts that take on the general contractor's liability
- Engineered lift plans with exclusion zones under every pick
- Hot work permits with fire watch after welding stops
- Contract review to strike broad indemnity clauses
Products and completed work
SevereA frame that fails after handover can bring down a building; connection errors are hidden once fireproofing and cladding go on.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Field modifications made without the engineer's written approval
- Rebar and precast connections buried in concrete before anyone rechecks them
- Bridges, stadiums, mezzanines and other assembly structures
- Bolt tensioning and weld inspection by an independent testing firm
- Welders certified for each process and position used
- Records kept of every field change and its approval
Workers’ injury
SevereConnectors and deckers work at height on narrow steel, with falls, struck-by and crushing injuries that are often fatal or disabling.
Injuries and illness to employees.
- Leading-edge decking work without fall arrest
- High turnover of connectors hired job to job
- Erection continuing in wind, rain or ice
- Full-time tie-off with engineered anchor points and perimeter cables
- Site-specific erection plan with sequence and temporary bracing
- Qualified riggers and signal persons on every lift
Commercial auto
ElevatedTractor-trailers haul long, heavy members to site, and crews drive service trucks with welders and gas cylinders.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Oversize loads moved without permits or escorts
- Crew trucks towing welders long distances to remote jobs
- Load securement checks before every departure
- Driver qualification files and periodic record reviews
Crime and theft
ModerateWelding leads, copper cable, tools and fuel disappear from open job sites; little cash is handled.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Gang boxes and welders left on unfenced sites
- Locked containers and equipment marked and inventoried per job
Inland marine and equipment
HighCranes, welding machines and rigging are high-value mobile equipment, and steel is at risk until bolted, plumbed and accepted.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Owned cranes operated near capacity or on unverified ground
- Fabricated steel stored on site before erection
- Annual crane inspection and daily operator checks, documented
- Installation cover for steel in transit and awaiting erection
Environmental
ModerateDiesel, hydraulic oil and paint are the usual pollutants; retrofit work can disturb lead paint on old steel.
Pollution on or from the site or the work.
- Cutting or welding on structures coated with lead-based paint
- Fuel tanks for cranes kept on site without containment
- Coating tests before hot work on existing steel
- Spill kits and drip trays with every fueled machine
Cyber and data
ModerateDetailing models, shop drawings and payroll run on networked systems; ransomware or a fake supplier invoice delays steel and payments.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Detailing and fabrication files held on one office server
- Supplier bank details changed on email instructions
- Offline backups of models and drawings, tested by restoring them
- Callback checks before changing any supplier bank details
Professional liability
ElevatedDelegated connection design, detailing and erection engineering make the firm answer for calculations, not just workmanship.
Loss or injury caused by advice, design, testing, care or another professional service.
- Connection design or detailing done by in-house staff
- Temporary bracing and erection sequence engineered in-house
- Delegated design done by licensed engineers carrying their own cover
- Shop drawings approved by the engineer of record before fabrication
Umbrella and excess
SevereA collapse during erection or a dropped load over a street can kill several people, and a failed frame threatens a whole building.
How likely one liability event is to exhaust primary limits.
- High-rise, stadium, bridge and other public assembly work
- Lifts over occupied buildings, traffic or rail lines
- Project-specific excess limits or wrap-up programs on the largest jobs
- Independent review of erection plans for complex or heavy lifts
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Usually a steel shop in a pre-engineered metal building with overhead cranes, and an open yard for members, decking, rebar and precast awaiting delivery.
- Occupancy
- Cutting, welding, drilling and painting of steel, with oxygen and fuel gas cylinders, diesel for cranes and coatings stored around the shop.
- Protection
- Cylinders caged and separated by gas type, paint kept apart from hot work, extinguishers at each station, and a fenced, lit yard with cameras.
- Exposure
- Yards sit in industrial areas; job sites are the real exposure, with loads swung over other trades, streets, rail lines and occupied buildings.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: work performed
On site: job sites
On site: cranes and vehicles
On site: records
Refer or decline if you find
- No site-specific erection plan or temporary bracing design
- Connectors working untied at height
- Crane operators or riggers without documented qualification
- Field cuts and weld changes made without engineer approval
- Any prior collapse during erection
How UrbanStat data helps.
The yard matters less than the job sites. Partly erected frames are vulnerable to wind until braced, coastal and seismic sites raise design demands, and open sites in high-theft areas lose tools, leads and fuel.
- Wind and hurricane scores for a project address show how exposed a partly braced frame will be before installation cover is priced.
- The risk analysis API returns wind and earthquake scores for a job-site address in seconds, so each new project is checked as it joins the installation schedule.
- Crime scores at the yard and at job sites inform security conditions for cranes, welders and stored steel.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
2.8 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.
0.8 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Structural steel and precast concrete contractors (NAICS 23812), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
19 fatal work injuries in 2024, most often from transportation incidents (5).
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Structural Steel and Precast Concrete Contractors (NAICS 23812), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
655 citations from 272 inspections; 71% were classed serious, willful or repeat.
- 1926.453 Aerial lifts66
- 1926.760 Fall protection55
- 1926.501 Duty to have fall protection47
- 1926.451 General requirements (scaffolds)46
- 1926.1053 Ladders23
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Structural Steel and Precast Concrete Contractors (NAICS 238120). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Riggers' liability
- Lifting and setting other parties' steel or equipment puts property in the erector's care, which general liability excludes.
- Installation floater
- Delivered and partly erected steel stays at the erector's risk from wind, theft and collapse until accepted.
- Contractors' pollution liability
- Cutting lead-coated steel and fuel spills from cranes fall under general liability pollution exclusions.
- Contract surety bonds
- General contractors and public owners require performance bonds, and bonding capacity caps the work the firm can take.
- Wrap-up program enrollment
- Big jobs often enroll erectors in owner or contractor programs; the firm's own policy excludes them, so short completed-work terms leave gaps.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.