---
title: "Millwrights: Industry Risk Guide"
description: "Millwrights dismantle, move, install, align and maintain production machinery, conveyors, turbines and pumps inside other companies' plants. They lift and…"
url: https://www.urbanstat.com/industry-risk-guides/millwrights/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Millwrights

Millwrights dismantle, move, install, align and maintain production machinery, conveyors, turbines and pumps inside other companies' plants. They lift and skate multi-ton equipment through working factories, cut and weld in place, and hand back machines whose guards, anchors and alignment decide whether they run safely.

Construction · NAICS 238290 · SIC 1796 · Updated November 2026

Risk profile

1. [Property Moderate](#line-property)
2. [Business interruption Moderate](#line-bi)
3. [Premises liability High](#line-gl)
4. [Products and completed work High](#line-products)
5. [Workers’ injury High](#line-wc)
6. [Commercial auto Elevated](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment High](#line-marine)
9. [Environmental Moderate](#line-env)
10. [Cyber and data Moderate](#line-cyber)
11. [Professional liability Moderate](#line-prof)
12. [Umbrella and excess High](#line-umbrella)

**Premises liability.** Crews cut, weld and move heavy loads inside live plants, where a dropped machine or a fire stops the customer's whole line.

Loss drivers

## Where losses come from.

1. Crush and struck-by injuries while jacking, skating and lifting heavy machinery
2. Customer machinery dropped, tipped or damaged while in the millwright's hands
3. Hot work fires and production stoppages inside customers' plants

How it compares Each line’s rating against the average for its NAICS sector, Construction (49 business types), and for all 747.

- Millwrights
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Moderate, 2 of 5; sector average 2.2; all business types 2.9.
2. Business interruption Interruption Business interruption: Moderate, 2 of 5; sector average 1.8; all business types 2.7.
3. Premises liability Premises Premises liability: High, 4 of 5; sector average 3.5; all business types 2.7.
4. Products and completed work Products Products and completed work: High, 4 of 5; sector average 3.8; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: High, 4 of 5; sector average 3.8; all business types 3.0.
6. Commercial auto Auto Commercial auto: Elevated, 3 of 5; sector average 3.1; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.7; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: High, 4 of 5; sector average 3.2; all business types 2.6.
9. Environmental Environmental Environmental: Moderate, 2 of 5; sector average 2.5; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Moderate, 2 of 5; sector average 2.0; all business types 2.7.
11. Professional liability Professional Professional liability: Moderate, 2 of 5; sector average 2.3; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: High, 4 of 5; sector average 4.0; all business types 3.6.

What’s changing

- Factory automation and robot cells bring more relocation and integration work, with tighter tolerances and guarding that must be proven at handover.
- Plants now schedule shorter, denser shutdowns, so crews work long shifts beside other contractors, which raises fatigue injuries and hot-work fire risk.
- Laser trackers and vibration sensors give documented alignment and condition records, which strengthen the defense when a machine fails after handover.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Moderate (2 of 5)

The shop holds rigging gear, forklifts, welders and some fabrication; steel-heavy contents and a modest fire load.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Welding and cutting in the shop beside paint, oils or crated customer equipment
- Customer machinery stored at the shop between jobs

**Controls that matter**

- Marked hot-work area kept clear of combustibles
- Values of customer equipment on the premises reported and insured

### Business interruption: Moderate (2 of 5)

Income is earned at customers' sites, but a shop loss can strand specialized rigging gear needed for scheduled shutdowns.

Covers: How long and how costly a shutdown is.

**Watch for**

- Shutdown and turnaround contracts with penalties for late completion
- One gantry or heavy forklift that every large job depends on

**Controls that matter**

- Rental sources lined up for lifts, gantries and skates
- Contracts that limit delay damages

### Premises liability: High (4 of 5)

Crews cut, weld and move heavy loads inside live plants, where a dropped machine or a fire stops the customer's whole line.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Hot work near dust collectors, oil mist, plastics or insulated panels
- Lifts made over running production lines or occupied areas
- Contracts accepting the customer's loss of production

**Controls that matter**

- Hot-work permits with fire watch, issued jointly with the plant
- Written lift plans for critical picks, with floor loading checked
- Hold-harmless and consequential-loss wording reviewed before signing

### Products and completed work: High (4 of 5)

A machine left misaligned, badly anchored or without guards and interlocks injures operators or wrecks itself after start-up.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Guards, light curtains or interlocks removed for installation and not refitted
- Conveyors or platforms designed and fabricated in-house
- Used machinery relocated and recommissioned without the maker's documentation

**Controls that matter**

- Commissioning checklist signed by the customer, covering guards and emergency stops
- Laser alignment and anchor torque records kept for each machine
- Engineer-stamped drawings for structural or conveyor design

### Workers’ injury: High (4 of 5)

Workers handle multi-ton loads in tight spaces, weld, climb and enter machinery, often on long shutdown shifts in unfamiliar plants.

Covers: Injuries and illness to employees.

**Watch for**

- Jacking and skating loads with improvised blocking
- Work on equipment not fully isolated from power, air or stored energy
- Long shutdown shifts with fatigue and temporary hires

**Controls that matter**

- Lockout verified by the millwright's own lock on each energy source
- Qualified riggers and signalers; rated slings inspected before use
- Confined space and fall protection procedures agreed with the host plant

### Commercial auto: Elevated (3 of 5)

Service trucks, flatbeds and trailers haul rigging gear and sometimes the customer's machinery between plants.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Oversize or top-heavy machinery hauled on the firm's own trailers
- Long drives home after extended shutdown shifts

**Controls that matter**

- Load securement training and permits for oversize moves
- Heavy hauls given to specialized carriers

### Crime and theft: Moderate (2 of 5)

Tools, alignment instruments and rigging are valuable and portable, but little cash is handled.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Laser alignment kits and welders left in trucks at hotels during travel jobs

**Controls that matter**

- Serial-numbered tool inventory and locked storage on trucks and at sites

### Inland marine and equipment: High (4 of 5)

The firm takes custody of customers' machinery while moving it, and its own gantries, forklifts and jacks live on job sites.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Single machines worth more than the riggers' liability limit
- New equipment received and stored on site before installation
- Borrowed or rented cranes and lifts operated by the firm's crew

**Controls that matter**

- Value of each item moved declared before the job and limits adjusted
- Installation and riggers' liability cover written for the largest lift
- Rented equipment insured as the rental contract requires

### Environmental: Moderate (2 of 5)

Draining hydraulic oil, coolant and lubricants from old machines causes spills, usually small and inside the plant.

Covers: Pollution on or from the site or the work.

**Watch for**

- Decommissioning of old transformers, presses or tanks with unknown fluids
- Cutting or grinding surfaces coated in lead paint

**Controls that matter**

- Fluids drained into containers and handed to the customer's waste system
- Spill kits on every truck

### Cyber and data: Moderate (2 of 5)

Crews plug laptops into customers' machine controls during commissioning, and the firm holds drawings and plant layouts customers treat as confidential.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Technicians' laptops connected to plant control networks without checks
- Customer drawings shared through personal email or messaging apps

**Controls that matter**

- Dedicated, patched commissioning laptops scanned before connecting to customer systems
- Project files kept on a managed system with access by job

### Professional liability: Moderate (2 of 5)

Most work follows the owner's or maker's design, but lift plans, foundation advice and alignment reports are relied on by customers.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Conveyors, platforms or machine bases designed in-house without an engineer
- Line layout or relocation planning sold as a consulting service

**Controls that matter**

- Licensed engineer's stamp on structural, foundation and conveyor designs
- Design scope and responsibilities stated in writing for each job

### Umbrella and excess: High (4 of 5)

A hot-work fire that burns a customer's plant or a machine failure that kills operators can far exceed primary limits.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Work in food, chemical or paper plants with high fire loads
- Contracts requiring high limits and waiver of the customer's own insurance

**Controls that matter**

- Limits matched to the largest plant value worked in
- Hot-work and lift rules enforced the same way on every shutdown

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: A steel or masonry shop with high bays, overhead cranes and a fenced yard, often in an older industrial district near the plants it serves.
- **Occupancy**: Welding, cutting and machining of bases and guards, forklift charging and storage of rigging gear and customers' machinery; most hours are worked inside customers' plants.
- **Protection**: A marked hot-work area, fire extinguishers at each welding station, separated battery charging, monitored alarms and sprinklers where stored machinery or crating adds combustibles.
- **Exposure**: The shop's neighbors matter less than the customers' plants, where crews work beside dust collectors, oil mist, process heat and running lines.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What share of revenue comes from installation, relocation, shutdown maintenance and in-shop repair or fabrication?
- Who are the largest customers, and how much work is out-of-town travel with crews in hotels?
- What are the largest shutdown and turnaround contracts, and how many crews do they need at peak?
- Does the firm take on electrical, controls or programming work, or subcontract it?
- How are temporary hires for shutdowns recruited, screened and supervised?

### Documents to request

- Loss runs for the current and prior policy terms
- Sample customer contracts showing indemnity and delay terms
- Written hot-work, lockout and lift planning procedures
- Sling, jack and forklift inspection records
- Certificates of insurance from crane and electrical subcontractors

### On site: work performed

- What kinds of machinery are installed or moved, and for which industries?
- What is the heaviest and the most valuable single item handled in the past year?
- Does the firm design or fabricate conveyors, platforms or guarding itself?
- Is crane work done in-house, rented with operator, or subcontracted to riggers?

### On site: job sites

- Who issues hot-work permits at customers' plants, and who stands fire watch?
- How is machinery isolated and locked out before crews work on it?
- Are written lift plans prepared, and who checks floor loading and rigging capacity?
- What do contracts say about damage to machinery and the customer's lost production?

### On site: equipment and vehicles

- How often are slings, jacks, gantries and forklifts inspected, and by whom?
- Who hauls heavy machinery on the road, and how are loads secured?

### On site: records and history

- Are commissioning sign-offs, alignment reports and guard checks kept for each job?
- What do past claims show for dropped loads, fires and crush injuries?

### Refer or decline if you find

- Contracts accepting unlimited liability for the customer's downtime
- Critical lifts made without a written plan or qualified rigger
- Hot work in customers' plants with no permit or fire watch
- Machines handed back with guards or interlocks missing
- Values handled far above the riggers' liability limit

Location

## How UrbanStat data helps.

The shop matters less than where customers' plants are. Machinery awaiting installation sits on job sites exposed to flood, wind and earthquake, and service trucks loaded with instruments are targets wherever crews stay overnight.

Flood · Earthquake · Wind · Crime

- Flood and earthquake scores at each customer plant show the exposure to machinery in the firm's care during installation, before the installation limit is agreed.
- Street-by-street exposure views show whether several insured projects and plants cluster in one industrial area, with alerts when the total passes a set threshold.
- Crime scores at the shop address inform theft terms for rigging gear, welders and alignment instruments.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Earthquake · Wind · Crime

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**1.4** recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.

Other building equipment contractors

**1.4**

All private industry

**2.3**

0.8 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Other building equipment contractors (NAICS 23829), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**6** fatal work injuries in 2024, most often from contact with objects and equipment (3).

Construction

**9.2**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Other Building Equipment Contractors (NAICS 23829), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**172** citations from 59 inspections; 55% were classed serious, willful or repeat.

- 1926.451 General requirements (scaffolds) **8**
- 1910.134 Respiratory protection **8**
- 1910.178 Powered industrial trucks **7**
- 1910.95 Occupational noise exposure **7**
- 1910.1200 Hazard communication **7**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Other Building Equipment Contractors (NAICS 238290). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Toxic chemical releases

**10** facilities reported toxic chemical releases totaling **9,986 pounds** on and off site.

- Certain glycol ethers **4,020**
- Nitrate compounds **3,716**
- Manganese **869**

Chemicals released in the largest amounts, in pounds. 2 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance (NAICS 811310). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Riggers' liability**: Customers' machinery being lifted or moved is in the firm's care, where general liability excludes the damage.
- **Installation floater**: New machinery received and stored on site before commissioning is at risk until the customer accepts it.
- **Contractors' pollution liability**: Hydraulic oil, coolant and unknown fluids drained from old machines can spill into plant drains and soil.
- **Rented equipment**: Cranes, aerial lifts and gantries rented for shutdowns must be insured as the rental contract requires.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [238290](https://www.urbanstat.com/industry-risk-guides/naics/?q=238290) | Other Building Equipment Contractors |
| NAICS 2022 | [811310](https://www.urbanstat.com/industry-risk-guides/naics/?q=811310) | Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance |
| SIC 1987, primary | [1796](https://www.urbanstat.com/industry-risk-guides/sic/?q=1796) | Installation or Erection of Building Equipment, NEC |
| SIC 1987 | [7699](https://www.urbanstat.com/industry-risk-guides/sic/?q=7699) | Repair Shops and Related Services, NEC |

**Related business types**

- [Riggers and machinery movers](https://www.urbanstat.com/industry-risk-guides/riggers-and-machinery-movers/)
- [Construction crane services](https://www.urbanstat.com/industry-risk-guides/construction-crane-services/)
- [Industrial building contractors](https://www.urbanstat.com/industry-risk-guides/industrial-building-contractors/)
- [Welding and metal cutting shops](https://www.urbanstat.com/industry-risk-guides/welding-and-metal-cutting-shops/)
- [Iron and steel erection contractors](https://www.urbanstat.com/industry-risk-guides/iron-and-steel-erection-contractors/)
- [Compare Millwrights with Riggers and machinery movers](https://www.urbanstat.com/industry-risk-guides/compare/?a=millwrights&b=riggers-and-machinery-movers)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/millwrights/

- Page: Millwrights: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/millwrights/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
