Valve, pump and fluid power manufacturersNAICS 332911 · SIC 3491
These manufacturers machine, assemble and pressure test valves, pumps, hydraulic cylinders, hose fittings, faucets and pipe fittings, mostly from castings and forgings. Their products hold back steam, fuel, gas, chemicals and water, so one leak or burst can start a fire, flood a building or injure a worker far from the plant.
NAICS 332911 Industrial Valve ManufacturingSIC 3491 Industrial ValvesNAICS 332912 Fluid Power Valve and Hose Fitting ManufacturingNAICS 332913 Plumbing Fixture Fitting and Trim Manufacturing+8 more codes
Where losses come from.
- 01
Leaks, bursts and stem blowouts in service that cause fires, explosions, floods or injection injuries
- 02
Failed plumbing fittings, supply lines and sump pumps that bring water damage claims from many buildings
- 03
Heavy casting handling, machining and pressure-test failures that injure plant staff
- PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
- Hydrogen, carbon capture and liquefied gas projects put valves and seals into service conditions with little field history, raising products and engineering exposure.
- Limits on lead in drinking water fittings push makers toward new alloys and plastics, changing machining hazards and long-term product performance.
- Smart actuators, connected pumps and remote monitoring turn hardware makers into software suppliers, adding cyber and firmware failure exposure.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ElevatedMachining with oils, paint and coating lines and racks of packaged stock; in-house brass casting or chrome plating adds furnaces and chemical baths.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Brass melting or a small foundry under the same roof as machining
- Elastomer seals, plastic parts and cartons stored in high racks
- Hydraulic test stands running mineral oil near welding or grinding
- Sprinklers designed for the rack storage, with cut-off rooms for paint and plating
- Shielded test stands with pressure-drop shut-off and fire-resistant fluid
Business interruption
ElevatedApproved designs depend on particular foundries and forgers, and product approvals tie each model to the plant where it was qualified.
How long and how costly a shutdown is.
- Single-source castings or forgings with long pattern and approval lead times
- One test bench or certified welding cell that every product passes through
- A second qualified foundry, with patterns held at more than one supplier
- Safety stock of finished units and spares for repair contracts
Premises liability
ModerateFew visitors come to the plant, but service crews repair and commission valves and pumps inside refineries, utilities and factories.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Field crews working on live lines at process plants
- Hot work or lifting at customer sites close to operating equipment
- Written permits, isolation and lockout agreed with the customer before work
- Review of indemnity and additional insured terms in service contracts
Products and completed work
HighThe products contain pressure, flammables and water; a failed seal, cracked body or wrong alloy causes fires, floods or injuries, often at many sites.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Safety relief, gas, fuel dispensing or nuclear service valves in the product line
- Plumbing fittings and supply lines sold in volume into homes and apartments
- Imported castings or seals accepted on paper certificates without verification testing
- Shell and seat tests on every unit, with results recorded by serial number
- Material verification of castings and forgings, including positive alloy checks
- Lot traceability fine enough to narrow any recall to specific batches
Workers’ injury
ElevatedMachinists, assemblers and testers face cuts, hands crushed under heavy bodies, and stored-energy releases during pressure testing.
Injuries and illness to employees.
- Heavy valve bodies and pump casings lifted and turned by hand
- Pressure testing in the open with no barrier or remote control
- Leaded brass machined or polished with no dust extraction
- Enclosed test cells with remote pressurization and interlocked doors
- Hoists, manipulators and fixtures for heavy castings at each station
- Blood lead testing and extraction wherever leaded brass is worked
Commercial auto
ModerateSales engineers and field service technicians drive to customer plants; finished goods move by carrier.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Crane-equipped service trucks carrying pumps and tools to sites
- Driving record checks and routine inspections for the service fleet
Crime and theft
ModerateBrass, bronze and stainless castings and turnings have strong scrap value and are skimmed by staff or outsiders.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Brass chips and rejected castings leaving with no weight record
- Finished faucets and fittings staged on open docks
- Scrap weighed out and reconciled against metal purchases
- Caged storage for nonferrous stock and finished brass goods
Inland marine and equipment
ModerateLarge valves and pumps ship to project sites and export buyers, and customers' units come in for rebuild and retesting.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Customer pumps and valves held for overhaul with no agreed value
- Large engineered units shipped by sea under unclear sale terms
- Bailee cover sized to the largest unit in for repair
- Sale terms stating where transit risk passes to the buyer
Environmental
ElevatedCutting oils, paint, plating baths, leaded brass chips and test fluids are used in volume, and older plants carry solvent contamination.
Pollution on or from the site or the work.
- Hard chrome plating of cylinder rods with hexavalent chromium
- Past vapor degreasing with chlorinated solvents
- Test water or oil drained to floor sumps or storm drains
- Closed-loop test fluid recovery and licensed disposal of spent oil
- Diked plating lines with fume scrubbers and wastewater treatment
- Baseline soil and groundwater testing on older sites
Cyber and data
ElevatedSmart actuators, pump controllers and dispensers connect to customers' control systems, and networked machining and order systems stop when encrypted.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Connected products shipped with default passwords or unpatched firmware
- Remote monitoring links reaching into customers' process networks
- Firmware update and vulnerability reporting process for connected products
- Production and office networks separated, with offline backups
Professional liability
ModerateSelection and sizing advice usually comes with the sale; designing complete pump skids or relief systems adds a real engineering exposure.
Loss or injury caused by advice, design, testing, care or another professional service.
- Selection advice or sizing software for corrosive, cryogenic or hydrogen service
- Engineers designing complete skids or systems rather than single units
- Application data sheets confirmed in writing by the customer
- Second engineer review of relief valve sizing and material choices
Umbrella and excess
HighA failed relief valve, gas valve or pump seal at a refinery or occupied building can kill several people and destroy a plant.
How likely one liability event is to exhaust primary limits.
- Products sold into hydrocarbon, gas, chemical or nuclear service
- Older product lines sold with asbestos packing or gaskets
- Limits sized to the most hazardous service the products enter
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Large single-story steel or masonry plants with crane bays, sometimes older brick buildings with additions, where a brass foundry or plating line can share the roof.
- Occupancy
- CNC machining with coolant and oils, welding and hardfacing, paint and powder coating, pressure testing with water, oil or gas, and racks of seals and boxed fittings.
- Protection
- Sprinklers designed for rack storage, cut-off rooms for paint and plating, shielded test cells, monitored fire and intrusion alarms, and caged storage for nonferrous stock.
- Exposure
- Industrial districts beside rail and highways; outdoor yards of castings, pallets against walls and neighboring foundries or chemical users add fire and pollution exposure.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: products and testing
On site: plant and protection
On site: people and handling
On site: field service and records
Refer or decline if you find
- Pressure testing with gas or air in the open, with no barrier
- Relief or gas valves shipped without recorded set-pressure or leak tests
- Imported castings accepted without material or leak verification
- Repeated water damage subrogation claims on plumbing fittings
- Hexavalent chrome plating with no fume control or wastewater treatment
How UrbanStat data helps.
Machining centers, test pits and oil sumps sit at or below grade, where flood water ruins machines and spreads oil. Wide-span roofs over crane bays face tornado and wind uplift, and shaking topples racks of heavy castings.
- Flood scores at the address show whether test pits, machining centers and below-grade sumps sit in water's path before machinery and stock values are accepted.
- Parcel and permit data give the construction date and permit history, showing when foundry, plating or crane-bay additions were built onto older plants.
- Street-by-street exposure views show accumulations where a plant, its foundry and its warehouse sit close together under one peril, with alerts at a set threshold.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
1.3 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.
0.4 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Industrial valve manufacturing (NAICS 332911). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
6 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Other Fabricated Metal Product Manufacturing (NAICS 3329), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
27 citations from 9 inspections; 70% were classed serious, willful or repeat.
- 1910.1200 Hazard communication6
- 1910.107 Spray finishing using flammable and combustible materials4
- 1910.1025 Lead3
- 1910.157 Portable fire extinguishers3
- 1910.215 Abrasive wheel machinery2
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Industrial Valve Manufacturing (NAICS 332911). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
58 facilities reported toxic chemical releases totaling 318,906 pounds on and off site.
- Copper and copper compounds86,557
- Zinc compounds78,305
- Copper72,070
Chemicals released in the largest amounts, in pounds. 49 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Industrial Valve Manufacturing (NAICS 332911). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Product recall
- Field failures of valves, fittings or supply lines prompt recalls across distributors, installers and many buildings at once.
- Contingent business interruption
- Approved designs rely on a few qualified foundries and forgers that cannot be replaced quickly.
- Contractors pollution
- Field crews opening lines at refineries and chemical plants can cause releases that general liability pollution exclusions remove.
- Equipment breakdown
- Large machining centers, test benches and plating rectifiers fail without fire and stop qualified production.
- Aircraft products liability
- Hydraulic and pneumatic valves and hose assemblies built for aircraft are often excluded from general liability and need separate cover.
NAICS and SIC codes for valve, pump and fluid power manufacturers
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 332911 | Industrial Valve Manufacturing |
| NAICS 2022 | 332912 | Fluid Power Valve and Hose Fitting Manufacturing |
| NAICS 2022 | 332913 | Plumbing Fixture Fitting and Trim Manufacturing |
| NAICS 2022 | 332919 | Other Metal Valve and Pipe Fitting Manufacturing |
| NAICS 2022 | 332996 | Fabricated Pipe and Pipe Fitting Manufacturing |
| NAICS 2022 | 333914 | Measuring, Dispensing, and Other Pumping Equipment Manufacturing |
| NAICS 2022 | 333995 | Fluid Power Cylinder and Actuator Manufacturing |
| NAICS 2022 | 333996 | Fluid Power Pump and Motor Manufacturing |
| SIC 1987, primary | 3491 | Industrial Valves |
| SIC 1987 | 3561 | Pumps and Pumping Equipment |
| SIC 1987 | 3492 | Fluid Power Valves and Hose Fittings |
| SIC 1987 | 3494 | Valves and Pipe Fittings, NEC |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.