Fiberglass and mineral wool insulation manufacturers
These plants melt sand and recycled glass, or basalt and slag, spin the melt into fibers, spray on a binder and cure the mat in long ovens before cutting, facing and compressing it into rolls and boards. Resin-laden ovens and ducts catch fire often, beside glass melters that cannot be stopped without a costly rebuild.
Where losses come from.
- 01
Fires in curing ovens, forming hoods, exhaust ducts and dust collectors laden with resin and fiber
- 02
Melter or cupola failures that release molten material and force months of rebuild
- 03
Burns, fiber irritation and caught-in injuries along forming, cutting and packaging lines
- PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.
- Plants moving from phenol-formaldehyde to formaldehyde-free binders cut emissions and odor complaints, but the new chemistry changes oven deposits and cleaning needs.
- Electric and oxygen-fired melting is replacing gas-air furnaces to cut emissions, making plants more dependent on large transformers and a steady grid supply.
- Stricter facade fire rules and energy standards drive demand for noncombustible mineral wool, bringing new lines whose start-up periods see more fires and defects.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
HighBinder-soaked fiber builds up in forming hoods, curing ovens and exhaust ducts and ignites often, beside a melter of molten glass or rock.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Oven and duct fires accepted as part of normal running
- Kraft facing applied with hot asphalt beside the line
- Faced and wrapped stock stacked high in lightly protected warehouses
- Scheduled cleaning of oven interiors, hoods and ducts, with records
- Spark detection and suppression in ducts and dust collectors
- Water spray in forming hoods and oven exhaust plenums
Business interruption
HighA glass melter runs for years without stopping; a refractory failure or frozen melt means a cold rebuild lasting months.
How long and how costly a shutdown is.
- Single-line plant with no sister plant making the same products
- Melter near the end of its campaign
- Standby power able to hold the melt at temperature through an outage
- Spare spinners, oven fans and drive parts held on site
Premises liability
ModeratePlants are closed to the public; neighbors notice odor, fiber fallout and smoke from oven fires, and outside drivers load in the yard.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Housing downwind with a record of odor or dust complaints
- Emission controls maintained and neighbor complaints logged and answered
Products and completed work
ElevatedInsulation is chosen for thermal and fire ratings; a batch that underperforms or is mislabeled triggers replacement and, in fire barriers, injury claims.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Products sold for fire-stopping, facades or fire-rated assemblies
- Binder or raw material changes made without retesting ratings
- Odor or formaldehyde complaints from homes where the product is installed
- Regular independent testing of thermal and fire performance
- Lot codes on every bag and board, with retained samples
Workers’ injury
ElevatedCrews work beside molten glass or rock, breathe and touch irritating fibers, and clear jams on fast saws and compression packers.
Injuries and illness to employees.
- Cupola tapping and slag handling done by hand
- Jams cleared on packers and saws without lockout
- Heat stress around melters and ovens in summer
- Lockout for every jam and web break
- Respirators, long sleeves and eye protection on forming and packing lines
- Heat-resistant gear and written procedures for tapping and furnace work
Commercial auto
ModerateBulky, light product fills many trucks, but most ship by contracted carriers and rail; owned vehicles are yard tractors and service trucks.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Own fleet delivering to distributors and job sites
- Safety vetting and insurance certificates for contracted haulers
Crime and theft
LowBulky, low-value product sold on account leaves little to steal beyond copper, scrap alloy and fuel.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Worn spinner alloy and copper stored in open yards
- Fenced, lit yards with gate control and load checks
Inland marine and equipment
ModerateCompressed product travels on contracted trucks and rail, and some stock sits on consignment in distributors' yards.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Stock held outdoors at distributors with unclear ownership
- Transit and consignment records matched to sale terms
Environmental
ElevatedBinder chemicals, melter emissions, wash water from forming hoods and cupola slag all need permits and managed disposal.
Pollution on or from the site or the work.
- Phenol, formaldehyde or ammonia tanks without secondary containment
- Wash water and binder waste held in unlined ponds
- Diked binder storage with spill kits at unloading points
- Closed-loop wash water with treatment before any discharge
Cyber and data
ElevatedMelter, oven and line controls run on networks; ransomware that blinds operators puts the melt at risk as well as output.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Control systems reachable from office networks or vendor remote access
- Segmented control networks with offline backups
- Manual procedures to hold the melt if control screens go dark
Professional liability
LowNo professional service is sold; thermal and fire performance advice to designers supports product sales.
Loss or injury caused by advice, design, testing, care or another professional service.
- Technical staff designing fire-rated systems for named projects
- Written terms limiting liability for project design advice
Umbrella and excess
ElevatedA melter breakout or a fire-rated product failing in an occupied building could injure many people, though such events are rare.
How likely one liability event is to exhaust primary limits.
- Products sold into high-rise facades and fire barriers
- Neighbors close to binder tanks and the melter
- Lot tracing that confines a defect to known production runs
- Containment and spacing that keep a chemical release on site
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Large steel-frame, noncombustible line buildings housing melting, forming and curing sections, with tall batch towers, binder tanks and wide warehouses or outdoor yards of wrapped product.
- Occupancy
- Molten glass or rock, gas-fired curing ovens that collect resin-soaked fiber, binder tanks, dust collectors, kraft and foil facing with hot asphalt, and plastic-wrapped packaged stock.
- Protection
- Water spray in forming hoods and oven exhaust, logged oven and duct cleaning, spark detection in collectors, warehouse sprinklers matched to faced product, and a trained plant fire team.
- Exposure
- Plants sit in industrial areas near rail; outdoor stock yards and binder tanks add exposure, and odor and fiber fallout cause friction with any nearby housing.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: melting
On site: forming and curing
On site: packaging and warehouse
On site: people and records
Refer or decline if you find
- Curing oven fires treated as routine, with no cleaning log
- Melter well past its expected campaign, with refractory hot spots
- No standby power or plan to hold the melt through an outage
- Faced product stacked above the sprinkler design limits
- Fire-rated product claims without current independent test reports
How UrbanStat data helps.
Shaking cracks melter refractory, and floodwater reaching molten glass or a cupola flashes violently to steam. Wind and hail tear the plastic on outdoor stock so rain soaks the product, and lift wide warehouse roofs.
- Earthquake scores at the address show how exposed a melter of molten glass or rock and its refractory are to shaking, before interruption terms are set.
- Parcel and permit data give construction dates and permit history for melter rebuilds, oven additions and new lines, a check on what the submission describes.
- Hail and wind scores at the address show the threat to outdoor yards of wrapped stock and wide warehouse roofs, informing deductibles for finished goods.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
1.4 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.
0.5 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Mineral wool manufacturing (NAICS 327993). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
28 fatal work injuries in 2024, most often from transportation incidents (11).
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Nonmetallic Mineral Product Manufacturing (NAICS 327), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
1,745 citations from 272 inspections; 60% were classed serious, willful or repeat.
- 1910.1053 Respirable crystalline silica358
- 1910.134 Respiratory protection250
- 1910.1200 Hazard communication161
- 1910.178 Powered industrial trucks77
- 1910.95 Occupational noise exposure67
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Other Nonmetallic Mineral Product Manufacturing (NAICS 3279), the closest published group. Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
41 facilities reported toxic chemical releases totaling 4.8 million pounds on and off site.
- Ammonia2.6M
- Manganese and manganese compounds564,675
- Manganese compounds521,674
Chemicals released in the largest amounts, in pounds. 18 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Mineral Wool Manufacturing (NAICS 327993). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Equipment breakdown
- Melter electrodes, transformers, spinners and oven fans fail without any fire and stop the line.
- Utility service interruption
- A long power or gas outage lets the melt freeze in the tank and forces a costly rebuild.
- Product recall
- A run with wrong thermal or fire ratings must be pulled from distributors and sometimes removed from buildings.
- Contingent business interruption
- Soda ash, borates, binder resin and cullet come from few suppliers, and their outages starve the melter.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.