Glass container and glassware manufacturers
Container and glassware plants melt sand, soda ash, limestone and recycled cullet in furnaces that never stop, then press or blow gobs of molten glass into bottles, jars, tableware and laboratory ware at high speed. Finished ware sits in shrink-wrapped pallets, and a flawed batch can reach thousands of consumers.
Where losses come from.
- 01
Furnace glass leaks and forming-machine oil fires at the hot end
- 02
Fires in tall stacks of shrink-wrapped pallets in the finished goods warehouse
- 03
Glass fragments or weak bottles reaching fillers and consumers, forcing recalls
- PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
- Lightweight bottles with thinner walls cut glass and freight costs but leave less margin for inclusions and handling damage on fillers.
- Deposit-return programs and higher recycled content bring more cullet into the melt, saving energy but adding ceramic and metal contaminants that cause defects.
- Electric boosting and hybrid furnaces cut emissions but make the plant more dependent on a reliable power supply and on its transformers.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
HighMolten glass and oil-lubricated forming machines at one end, plastic-wrapped pallets with cardboard dividers stacked high at the other.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Oil and swabbing compound build-up under forming machines and in basements
- Pallet stacks above the height the sprinklers were designed for
- Idle wooden pallets and plastic tier sheets stored indoors
- Glass leak detection, furnace cooling and catch pits kept clear
- Warehouse sprinklers matched to wrapped palletized storage and its height
- Routine cleaning of oil residues from hot-end pits and cable runs
Business interruption
HighEach furnace feeds several lines and takes months to rebuild; customers' bottle molds and colors tie output to this plant.
How long and how costly a shutdown is.
- Single-furnace plant serving a few large beverage or food customers
- Peak demand before summer or harvest filling seasons
- Standby power and fuel able to keep the furnace hot
- Mold sets and approvals in place at a sister plant
- Buffer stock held away from the production building
Premises liability
LowThe public does not enter; exposure is limited to haulers, cullet suppliers and maintenance contractors.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Visiting drivers on foot around lift trucks and cullet yards
- Segregated driver areas and contractor induction
Products and completed work
HighContainers hold food, drink and medicines; inclusions, chipped rims or weak walls mean injuries and recalls of the customer's filled product.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Carbonated or pressurized contents and returnable bottles
- Pharmaceutical vials and baby food jars
- Supply contracts that pass recall and line-stoppage costs back
- Automatic cold-end inspection with rejects tracked by mold cavity
- Pressure and impact testing on every production run
- Lot coding on pallets and a rehearsed recall plan
Workers’ injury
HighHot-end crews work in heat and noise beside machines that are swabbed while running, and broken glass is everywhere.
Injuries and illness to employees.
- Manual swabbing of molds on moving sections
- Job changes done under time pressure on hot machines
- Lift truck traffic in tight warehouse aisles
- Robotic swabbing or guarded swab positions
- Hearing, heat stress and cut protection programs enforced on the floor
- Lockout for jams and section maintenance
Commercial auto
ModerateShipping is mostly by contract hauler; own vehicles are yard shunters and a few service trucks.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Own fleet delivering to fillers or shuttling to remote warehouses
- Driver qualification and load securing checks for tall pallet loads
Crime and theft
LowEmpty containers have no theft appeal, and no cash is handled.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Purchasing fraud in cullet and raw material weighing
- Weighbridge records reconciled independently against invoices
Inland marine and equipment
ModerateCustomers' mold sets are held on site, and finished pallets move by road and rail in large volumes.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- High-value customer-owned molds with no agreed valuation
- Stock stored in outside warehouses
- Register of customers' tooling with values and responsibility agreed
- Reported values for stock at each outside location
Environmental
ElevatedFurnace stacks emit combustion gases and particulates, and the plant handles fuel oil, mold lubricants and surface-treatment chemicals.
Pollution on or from the site or the work.
- Hot-end coating vapors vented without capture
- Oily cooling water and cullet wash water discharged untreated
- Outdoor cullet piles shedding runoff
- Stack filtration and continuous monitoring within permit limits
- Oil separators on process water circuits
- Diked bulk tanks for fuel and lubricants
Cyber and data
ElevatedForming machines, inspection systems and furnace controls are networked; losing them halts lines and the lot data customers demand.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Machine suppliers with standing remote access to forming and furnace controls
- Inspection and lot tracing data with no offline copy
- Segmented control networks with tested offline backups
- Hot-end procedures for running the furnace when systems are down
Professional liability
ModerateContainer makers often design the bottle shape and weight for the customer; a weak design breaks on fillers and stops their lines.
Loss or injury caused by advice, design, testing, care or another professional service.
- Lightweight or custom bottle designs developed by the plant's own design team
- Customer sign-off on design, pressure rating and line trials
Umbrella and excess
HighA run of bottles with glass inclusions or weak walls can injure many consumers and force a filler's market-wide recall.
How likely one liability event is to exhaust primary limits.
- Baby food jars, pharmaceutical vials and pressurized beverage bottles
- Contracts passing customers' recall and lost profit costs back
- Cavity-level inspection data and lot coding that narrow a recall's scope
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Large noncombustible furnace and forming halls with basements of oil, cable and cooling lines, joined to wide, lightly built warehouses for palletized stock.
- Occupancy
- Continuously fired furnaces, oil-lubricated forming machines swabbed while running, annealing lehrs, hot-end coating, and high stacks of shrink-wrapped pallets with cardboard and plastic tier sheets.
- Protection
- Glass leak detection and catch pits, standby power for furnace cooling, sprinklers in hot-end basements, and warehouse sprinklers designed for the actual height of wrapped storage.
- Exposure
- Plants sit in industrial zones near fillers and rail lines; outdoor cullet and pallet yards and neighbors' storage add fire exposure close to the warehouse.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: hot end
On site: cold end and quality
On site: warehouse
On site: people
Refer or decline if you find
- Warehouse storage higher than the sprinkler design allows
- No standby power for furnace cooling and controls
- Inspection machines bypassed to keep a line running
- Heavy oil build-up in hot-end basements
How UrbanStat data helps.
Furnaces cannot ride out long power outages, shaking or flood water. Finished goods warehouses are wide, lightly roofed buildings that wind can open, soaking cartons and ruining clean stock.
- Wind, tornado and hurricane scores at the address inform roof terms for the wide warehouse where wrapped pallets of clean containers are stored.
- Flood and earthquake scores for the site show how exposed a furnace that must stay hot is to the perils that cut power or breach the tank.
- Parcel and permit data show the age of each building and recent warehouse additions, a prompt to ask whether sprinklers kept pace with storage.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
4.1 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.
1.0 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Glass container manufacturing (NAICS 327213). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
28 fatal work injuries in 2024, most often from transportation incidents (11).
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Nonmetallic Mineral Product Manufacturing (NAICS 327), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
41 citations from 11 inspections; 41% were classed serious, willful or repeat.
- 1910.1053 Respirable crystalline silica6
- 1910.146 Permit-required confined spaces5
- 1910.28 Duty to have fall protection and falling object protection5
- 1910.305 Wiring methods, components, and equipment for general use4
- 1910.134 Respiratory protection2
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Glass Container Manufacturing (NAICS 327213). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
36 facilities reported toxic chemical releases totaling 215,365 pounds on and off site.
- Sulfuric acid152,238
- Hydrochloric acid25,180
- Ammonia23,802
Chemicals released in the largest amounts, in pounds. 2 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Glass Container Manufacturing (NAICS 327213). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Equipment breakdown
- Forming machines, compressors, transformers and furnace fans fail mechanically and stop several lines together.
- Product recall
- Glass fragments in a filled product force recall of the customer's goods, not just the empty containers.
- Utility service interruption
- A long gas or power cut lets the glass freeze in the tank, forcing a rebuild lasting months.
- Contingent business interruption
- A few large fillers take most output, so a fire at a key customer can idle the furnace.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.