Abrasive product manufacturersNAICS 327910 · SIC 3291

Abrasive product makers bond grains of aluminum oxide, silicon carbide, ceramic or diamond into grinding wheels and cut-off discs, coat them onto paper or cloth for belts and sheets, or make the grain itself in electric furnaces. Resin curing ovens and dust burn, and a wheel that bursts in use injures its operator.

NAICS 327910 Abrasive Product ManufacturingSIC 3291 Abrasive Products

Manufacturing · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Fires and dust explosions at resin mixing, curing ovens and festoon dryers

  2. 02

    Grinding wheels that burst or shatter in use, injuring or blinding the operator

  3. 03

    Dust, noise, press and handling injuries in mixing, forming and finishing

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Ceramic and precision-shaped grains and diamond tools raise the value of each batch and of stock on hand, making contamination and theft costlier.
  • Cordless angle grinders with thin cut-off wheels are now common among nonprofessional users, raising misuse injuries and suits that name the wheel maker.
  • Low-priced imported and counterfeit wheels with copied markings reach users, so makers face claims and recall pressure over products they never made.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

High
Phenolic resin dust, festoon dryers full of coated paper and cloth, and gas-fired curing ovens give frequent fires and dust explosion potential.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Resin dust layers on beams, ducts and light fittings
  • Festoon dryers without internal sprinklers or scheduled duct cleaning
  • Silicon carbide or fused grain furnaces on the same site
Controls that matter
  • Dust hazard analysis, with collectors vented and isolated
  • Sprinklers inside festoon dryers and logged duct cleaning
  • Overheat interlocks on curing ovens and kilns

Business interruption

Elevated
Presses and kilns are standard, but a wide coating line takes months to replace, and aerospace and bearing customers must requalify any substitute.

How long and how costly a shutdown is.

Watch for
  • One coating line or furnace supplying every product
  • Specialty grain or resin bought from a single source
Controls that matter
  • Spare parts and rebuild plans for coaters, dryers and kilns
  • Qualified alternate grain and resin suppliers

Premises liability

Moderate
Few visitors enter the plant, but technical staff demonstrate grinding at customers' sites, where a wheel failure injures bystanders.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Field demonstrations and trials on customers' machines
Controls that matter
  • Demonstrations only on guarded machines checked for speed and condition

Products and completed work

High
A wheel that bursts, a cut-off disc that shatters or a wrong speed marking causes eye, face and sometimes fatal injuries.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Thin cut-off wheels sold through retail to nonprofessional users
  • Resin wheels sold without expiry dates or storage guidance
  • Private-label products made for brands the plant does not control
Controls that matter
  • Every wheel speed tested above its rating, with records kept
  • Clear maximum speed, expiry and lot markings on every wheel
  • Retained samples and lot tracing to each distributor

Workers’ injury

Elevated
Respirable silica and metal dust, noise, press work, heavy wheel handling and occasional bursts during testing bring a steady run of claims.

Injuries and illness to employees.

Watch for
  • Dry truing and finishing without local extraction
  • Cobalt or nickel powders in metal-bonded superabrasives
  • Manual lifting of large wheels and jumbo rolls
Controls that matter
  • Local exhaust and air monitoring at mixing and finishing
  • Interlocked guards and two-hand controls on presses
  • Hoists and fixtures for large wheels

Commercial auto

Moderate
Product ships through carriers and distributors; owned vehicles are mainly sales cars and a few delivery trucks.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Sales staff carrying demonstration stock and machinery
Controls that matter
  • Driving record checks and written fleet safety rules

Crime and theft

Moderate
Most stock has little resale value, but diamond and cubic boron nitride grit, cobalt powder and finished superabrasive tools are compact and valuable.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Superabrasive materials kept outside a locked cage
Controls that matter
  • Weighed issue and return of diamond and CBN grit

Inland marine and equipment

Moderate
Boxed product moves by carrier, and large roll-grinding wheels are costly single items that crack if dropped in transit.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Large wheels shipped without engineered crating
Controls that matter
  • Custom crates and shock indicators on large wheel shipments

Environmental

Elevated
Phenol and formaldehyde from resin bonds, solvent and kiln emissions, plating baths and furnace residues need permits and controlled disposal.

Pollution on or from the site or the work.

Watch for
  • Old furnace residues or grinding sludge buried on site
  • Electroplating lines for superabrasive tools
Controls that matter
  • Thermal oxidizers or scrubbers maintained to permit conditions
  • Licensed disposal of resin waste, sludge and plating solutions

Cyber and data

Elevated
Coating lines, kiln controllers and lot tracing run on the plant network; ransomware halts production and labeling, though little personal data is held.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Kiln and coater controls reachable from office networks or vendor remote access
  • Label printing and lot tracing on one system with no backup
Controls that matter
  • Control networks segmented from office systems, with vendor access controlled
  • Offline backups and a manual labeling procedure

Professional liability

Low
No professional service is sold; application engineers' wheel and grinding advice is given free to support product sales.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Grinding process development sold as a paid service to aerospace or medical part makers
Controls that matter
  • Written terms that limit liability for application advice

Umbrella and excess

High
A burst wheel can kill or blind its user, and with cut-off wheels in untrained hands, one injury verdict can exhaust primary limits.

How likely one liability event is to exhaust primary limits.

Watch for
  • A large share of sales through retail to nonprofessional users
  • Private-label lines sold under several brands
Controls that matter
  • Lot tracing that confines a defect to known production runs
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Mostly older single-story steel-frame or masonry plants with kiln and oven additions, mezzanine resin mixing rooms, and warehouses of boxed wheels and jumbo rolls.
Occupancy
Phenolic resin powders and liquid adhesives, gas-fired kilns and curing ovens, festoon dryers carrying resin-coated paper and cloth, and combustible dust in mixing and finishing.
Protection
Sprinklers throughout, with protection inside festoon dryers and their ducts, dust collectors with explosion venting and isolation, kiln burner safeguards, and enclosed speed test chambers.
Exposure
Plants often sit in older industrial districts with shared rail sidings; neighbors' operations, outdoor pallets and resin tanks add fire exposure in both directions.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: mixing and forming

On site: curing and firing

On site: testing and finishing

On site: people and records

Refer or decline if you find

  • Wheels shipped without speed testing or maximum speed markings
  • Resin dust layers on beams, ledges and ducts in mixing areas
  • Recurring festoon dryer fires with no change to cleaning or protection
  • Private-label wheels sold under other brands with no lot tracing
  • Indoor dust collectors with no explosion venting or isolation
05 / Location

How UrbanStat data helps.

A vitrified wheel that is jolted or dropped can crack unseen and must be scrapped, so shaking can write off racked stock. Floodwater ruins paper and cloth-backed rolls and resin bonds, and wind strips wide plant roofs.

EarthquakeFloodTornadoWind
  • Earthquake scores at the address matter because jolted vitrified wheels can crack unseen and must be scrapped, putting racked finished stock at risk.
  • Parcel and permit data show building age and permit history for kiln, oven and dust collector work, a quick check on how the plant has changed.
  • Flood scores at the address show whether ground-floor stores of paper and cloth-backed rolls and resin wheels sit where water would ruin them.
Earthquake · Flood · Tornado · Wind
06 / Public loss data · NAICS 327910

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

4.6 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Abrasive product manufacturing
4.6
All private industry
2.3

1.3 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Abrasive product manufacturing (NAICS 32791), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

28 fatal work injuries in 2024, most often from transportation incidents (11).

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Nonmetallic Mineral Product Manufacturing (NAICS 327), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

17 citations from 8 inspections; 82% were classed serious, willful or repeat.

  • 1910.212 General requirements for all machines
    4
  • 1910.134 Respiratory protection
    3
  • General duty clause: recognized hazards likely to cause death or serious harm
    1
  • 1910.36 Design and construction requirements for exit routes
    1
  • 1910.110 Storage and handling of liquefied petroleum gases
    1

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Abrasive Product Manufacturing (NAICS 327910). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

28 facilities reported toxic chemical releases totaling 1.3 million pounds on and off site.

  • Manganese
    985,625
  • Phenol
    118,465
  • Methanol
    31,668

Chemicals released in the largest amounts, in pounds. 8 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Abrasive Product Manufacturing (NAICS 327910). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Product recall
A lot with a wrong speed marking or weak bond must be traced and pulled from distributors and users quickly.
Equipment breakdown
Kilns, presses, coaters and electric furnaces fail mechanically or electrically and stop whole product lines.
Contingent business interruption
Specialty grains, resins and backings often come from one overseas source, and losing it stops lines.

NAICS and SIC codes for abrasive product manufacturers

SystemCodeIndustry
NAICS 2022, primary327910Abrasive Product Manufacturing
SIC 1987, primary3291Abrasive Products
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →