Pottery and ceramic ware manufacturersNAICS 327110 · SIC 3269
Pottery manufacturers blend clay bodies, form them by casting, pressing or jiggering, then glaze and fire the ware in gas or electric kilns. The product does not burn, but kilns, dryers, silica dust, glaze chemistry and heavy manual handling all generate claims, and a kiln outage cuts straight into output.
NAICS 327110 Pottery, Ceramics, and Plumbing Fixture ManufacturingSIC 3269 Pottery Products, NEC+3 more codes
Where losses come from.
- 01
Kiln and dryer fires or gas explosions, and fires in packing materials and pallets
- 02
Silica dust disease, strains and burns among forming, glazing and kiln staff
- 03
Glazes that leach lead or cadmium into food, and fixtures that crack in use
- PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.
- Electric and hydrogen-ready kilns are replacing gas firing to cut emissions, changing the fire hazard but adding heavy electrical loads and new controls.
- Tighter limits on silica exposure push plants toward wet cleaning, extraction and air monitoring, and leave plants that lag behind with more disease claims.
- Imported tableware and marketplace sellers compete hard, while retailers ask for more lead and cadmium release data before they list a product.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ElevatedFuel-fired kilns and dryers run for long cycles, and the packing and warehouse areas hold cartons, paper fill and wooden pallets.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Older kilns without flame supervision or purge interlocks
- Ware boards and kiln furniture stacked against combustible wall or roof linings
- Packaging and pallet storage sharing an undivided area with firing
- Burner safeguards tested annually by a qualified combustion technician
- Sprinklers over packing, mold shop and finished goods storage
- Clear space kept around kilns, flues and exhaust stacks
Business interruption
ElevatedFiring is usually spread over several kilns, so one outage slows rather than stops output, but design-specific molds are slow to remake.
How long and how costly a shutdown is.
- A single tunnel kiln carrying all output
- Master molds and pattern libraries kept in one building
- Duplicate master molds or digital model files held off site
- Spare kiln cars, elements and burner components in stock
Premises liability
ModerateFew outsiders enter the plant, but factory shops, tours and decorating sessions bring the public near breakable stock and hot areas.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Factory tours routed past kilns or glaze lines
- Seconds shops with chipped ware on open shelves
- Marked visitor routes with barriers at hot and moving equipment
- Outlet store housekeeping and a breakage clean-up routine
Products and completed work
ElevatedTableware touches food and sanitary fixtures carry body weight; glaze leaching, thermal shock breakage and cracked fixtures all injure users.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Brightly colored glazes and decals containing lead or cadmium
- Ovenware and mugs sold with microwave or oven-safe claims
- Toilet tanks and lids that crack and flood homes, drawing subrogated water claims
- Leach testing of each glaze and firing schedule by an independent laboratory
- Batch marking that lets a firing lot be traced and recalled
- Load and thermal shock testing for fixtures and cookware
Workers’ injury
HighRespirable silica from clay, glaze and fettling dust, plus repetitive lifting of wet ware, plaster molds and kiln furniture.
Injuries and illness to employees.
- Dry sweeping or compressed air used to clean floors and benches
- Manual loading of kiln cars and heavy plaster molds
- Glaze spraying outside a booth, or lead-bearing glazes mixed by hand
- Wet cleaning, local exhaust and routine air monitoring for silica
- Lift assists and height-adjustable benches at casting and kiln loading
- Health surveillance with lung function testing for exposed staff
Commercial auto
ModerateMost output ships by outside carrier; exposure is limited to a few delivery vans and sales vehicles.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Own trucks delivering to retailers or building sites
- Driving record checks and load securing for fragile palletized ware
Crime and theft
LowStock is bulky, fragile and low in value per piece, with little cash outside a factory shop.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Online store refunds and gift card fraud
- Reconciled shop receipts and separation of order entry from refunds
Inland marine and equipment
ModerateFragile goods travel long distances to retailers, and molds or undecorated blanks move between sites and outside decorators.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Export shipments and trade fair samples
- Customers' molds or designs held for private-label work
- Packaging drop-tested for parcel carriers
- Written terms covering customers' tooling held on site
Environmental
ElevatedGlaze materials contain heavy metals, and slip, glaze wash-down and kiln exhaust all need treatment before release.
Pollution on or from the site or the work.
- Glaze wash water going to drains without settlement
- Old waste pits or dumps of broken glazed ware on site
- Settlement tanks and filter presses with sludge sent to licensed disposal
- Stack emissions tested where fluoride-bearing clays are fired
Cyber and data
ModerateKiln controllers and online stores are networked, but forming and firing carry on if office systems fail.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Online store holding card data on its own server
- Kiln controllers reachable remotely by equipment suppliers
- Hosted payment pages so card data never touches company systems
- Supplier remote access limited, logged and switched off when idle
Professional liability
LowWare is made to the maker's or customer's design; technical advice is rarely sold as a separate service.
Loss or injury caused by advice, design, testing, care or another professional service.
- Technical ceramics designed to a customer's performance specification
- Specifications approved in writing by the customer
Umbrella and excess
ElevatedA leaching glaze sold across a whole design line can harm many households, and failed insulators can start fires or outages.
How likely one liability event is to exhaust primary limits.
- Large retail programs selling one glaze through many outlets
- Electrical porcelain for high-voltage service
- Leach testing repeated for each glaze lot and supplier change
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Often older multi-story or sprawling masonry and steel factories with lightweight roofs, plaster mold shops, kiln halls and large warehouses added over time.
- Occupancy
- Gas or electric kilns and dryers on long cycles, plaster, clay and glaze dust, decal solvents, and cartons, paper fill and wooden pallets in packing.
- Protection
- Sprinklers over mold shop, packing and warehouse, burner safeguards on every kiln, clearance around flues, dust extraction at fettling and spraying, and monitored alarms.
- Exposure
- Outdoor pallet stacks, packaging stores and propane tanks or gas regulator stations sit beside the walls, and older plants may share walls with other tenants.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: products and process
On site: kilns and building
On site: people and dust
On site: records
Refer or decline if you find
- No leach test results for food-contact glazes
- Kiln burner controls bypassed or flame safeguards disabled
- Visible dust layers and dry sweeping throughout the plant
- Oven-safe or microwave-safe claims with no supporting tests
How UrbanStat data helps.
Kilns, shelved unfired ware and warehoused ceramics are easily wrecked by ground shaking. Clay stores, slip tanks and low-lying kiln pits suffer in floods, and a windstorm that cuts power mid-firing ruins the load.
- Earthquake scores at the address show how exposed kilns, racked ware and finished stock are to shaking, which matters for a product that breaks rather than burns.
- Parcel and permit data give the building's construction date and any recent kiln, gas or electrical permits, a quick check on the age of the firing plant.
- Flood scores at the address show whether ground-level kilns, slip tanks and stored clay sit in water's path before interruption cover is priced.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
2.9 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.
0.8 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Pottery, ceramics, and plumbing fixture manufacturing (NAICS 32711), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
28 fatal work injuries in 2024, most often from transportation incidents (11).
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Nonmetallic Mineral Product Manufacturing (NAICS 327), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
39 citations from 7 inspections; 33% were classed serious, willful or repeat.
- 1910.134 Respiratory protection7
- 1910.1053 Respirable crystalline silica5
- 1910.1200 Hazard communication2
- 1910.28 Duty to have fall protection and falling object protection1
- 1910.29 Fall protection systems and falling object protection—criteria and practices1
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Pottery, Ceramics, and Plumbing Fixture Manufacturing (NAICS 327110). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
4 facilities reported toxic chemical releases totaling 19,142 pounds on and off site.
- Zinc compounds19,048
- Lead94
Chemicals released in the largest amounts, in pounds. 2 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Pottery, Ceramics, and Plumbing Fixture Manufacturing (NAICS 327110). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Equipment breakdown
- Kiln controls, fans, elements and compressors fail without fire and spoil whole firing loads.
- Product recall
- A glaze that fails a leach test means pulling a full design line back from retailers and online buyers.
- Utility service interruption
- A gas or power outage during firing ruins the kiln load and can crack the kiln lining.
- Employment practices
- A large shift-working shop-floor workforce brings wage, harassment and wrongful dismissal claims.
NAICS and SIC codes for pottery and ceramic ware manufacturers
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 327110 | Pottery, Ceramics, and Plumbing Fixture Manufacturing |
| SIC 1987, primary | 3269 | Pottery Products, NEC |
| SIC 1987 | 3262 | Vitreous China Table and Kitchen Articles |
| SIC 1987 | 3261 | Vitreous China Plumbing Fixtures and China and Earthenware Fittings and Bathroom Accessories |
| SIC 1987 | 3264 | Porcelain Electrical Supplies |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.