Tank, boiler and pressure vessel fabricators
These fabricators roll, weld and test heavy plate into storage tanks, boilers, heat exchangers, gas cylinders and pressure vessels, mostly to customer order and often under a pressure code. A bad weld, wrong material or skipped test can release stored energy or contents with lethal force long after delivery.
Where losses come from.
- 01
Vessels, boilers or cylinders that rupture or leak in service because of weld, material or design faults
- 02
Crushing, falls, burns and confined-space injuries while handling, rolling and welding heavy plate
- 03
Damage to large, high-value vessels during lifting, oversized transport and field erection
- PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Elevated, 3 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Severe, 5 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Elevated, 3 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: High, 4 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Elevated, 3 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: Severe, 5 of 5; sector average 3.6; all business types 3.6.
- Hydrogen, ammonia and carbon capture projects bring higher pressures, cryogenic temperatures and embrittlement concerns, raising the severity of any design or weld error.
- Retiring skilled welders and inspectors are being replaced by automated welding and phased-array ultrasonic testing, which improves consistency but leans on fewer qualified people.
- Owners are pushing longer warranties and broad indemnities into fabrication contracts, shifting more of the cost of downstream failures onto the fabricator.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ElevatedPlate and machines are noncombustible, but cutting, welding, stress-relief furnaces, coating booths and rubber lining work supply ignition and fuel.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Painting, coating or rubber lining done in the main fabrication bay
- Bulk oxygen and fuel gas manifolds near welding bays
- Gas-fired stress-relief furnaces large enough to hold whole vessels
- Separate, sprinklered coating and lining areas with ventilation interlocks
- Hot work permits and a fire watch wherever welding happens near combustibles
- Burner management and flame safety controls on stress-relief furnaces
Business interruption
ElevatedLarge plate rolls, cranes and the stress-relief furnace are bottlenecks, and code certification is tied to the shop's address.
How long and how costly a shutdown is.
- Crane capacity or bay height that no nearby shop matches
- Backlog concentrated in a few large vessels with penalty clauses
- Arrangements to rent furnace or rolling capacity from other shops
- Spare crane hoist motors, drives and roll bearings on hand
Premises liability
ElevatedMany fabricators erect tanks and set vessels at refineries, plants and farms, welding and lifting beside operating equipment.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Field welding at tank farms or plants still in operation
- Lifts over occupied areas or public roads
- Gas testing, hot work permits and fire watch at every field job
- Written lift plans signed off for critical picks
Products and completed work
SevereA ruptured vessel, boiler or cylinder releases stored energy or contents violently, destroying buildings and killing people nearby.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Vessels for toxic, flammable, cryogenic or high-pressure service
- Repairs or alterations to vessels in service without fresh testing
- Gas cylinders sold in large numbers to the public
- Independent authorized inspector witnessing design review, welding and hydrotest
- Material test reports checked against plate and weld records
- Radiography or ultrasonic testing of every pressure weld
Workers’ injury
HighWorkers handle heavy plate and shells, weld inside vessels, work at height on tanks and stand near pressure tests.
Injuries and illness to employees.
- Welding inside vessels without gas testing or forced ventilation
- Rolling and turning shells with workers in the pinch zone
- Pneumatic rather than hydrostatic pressure testing
- Confined space permits, atmospheric monitoring and attendants for vessel entry
- Fume extraction and respirators for stainless and coated metal
- Exclusion zones and remote gauges during pressure testing
Commercial auto
ElevatedFinished vessels travel as oversized loads, and service trucks carry welders, cylinders and crews to field jobs.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Own lowboys hauling oversized loads without permits or escorts
- Crew trucks driving long distances to remote job sites
- Surveyed routes, permits and escorts arranged for each oversized move
- Driver qualification files and hours tracking for field crews
Crime and theft
ModerateWelding machines and tools at job sites, and stainless or alloy offcuts in the yard, attract thieves.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Equipment left in unsecured job site containers overnight
- Tracked, locked tool containers and fenced yards with cameras
Inland marine and equipment
HighA single finished vessel carries a large value and is exposed during lifting, transport and erection until the customer accepts it.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Oversized loads crossing bridges, rail lines and overhead cables
- Field-erected tanks left partly built through storm seasons
- Cranes and rigging owned or hired without engineered lift plans
- Transit and installation limits set at the value of the biggest shipment
- Wind bracing for partly erected tank shells
- Crane inspections and certified riggers and signal persons
Environmental
ModeratePaints, linings, blasting grit and hydrotest water are the main wastes; radiography sources need tight control.
Pollution on or from the site or the work.
- Radiography sources stored or used without a licensed program
- Spent blast media containing old lead paint from repair work
- Licensed radiography contractor or program with source logs
- Contained blasting and tested disposal of spent media
Cyber and data
ModerateDesign files, weld procedures and customer drawings sit on networked systems; an outage delays work but rarely stops it.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Code design records held in one system with no backup
- Offline backups of design calculations, procedures and inspection records
Professional liability
ElevatedFabricators often design the vessel themselves, and wrong thickness, nozzle loads or material selection builds in a hidden defect.
Loss or injury caused by advice, design, testing, care or another professional service.
- In-house design under the shop's own code certification
- Thermal design of heat exchangers sold with performance guarantees
- Design calculations checked by a second qualified engineer
- Clear split of design responsibility in every contract
Umbrella and excess
SevereA boiler or vessel explosion in a plant, school or refinery can kill several people and cause huge property losses.
How likely one liability event is to exhaust primary limits.
- Vessels for refineries, chemical plants or occupied public buildings
- Large runs of propane or industrial gas cylinders
- Documented traceability so claims can be tied to specific units
- Limits on contractual indemnities to owners and engineers
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- High-bay steel-frame fabrication halls with heavy crane runways, large doors, reinforced floors for vessel turning rolls, and outdoor yards for plate, finished vessels and blasting.
- Occupancy
- Plasma and oxy-fuel cutting, submerged arc and manual welding, gas-fired stress relief, abrasive blasting, painting and rubber lining, and radiography and hydrostatic testing of finished vessels.
- Protection
- Separate sprinklered coating and lining rooms, hot work control, monitored alarms, protected bulk gas storage, and secure radiography source storage with restricted access.
- Exposure
- Usually in industrial parks or near ports and rail for shipping large vessels; field jobs put crews inside refineries, tank farms and process plants owned by others.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: fabrication
On site: testing and inspection
On site: people and safety
On site: field and transport
Refer or decline if you find
- Pneumatic pressure testing with no exclusion zone or remote gauges
- Code certification lapsed or under review after inspection findings
- Vessel welds released without the required nondestructive testing
- Vessel entry for welding without permits or gas monitoring
- Repairs to in-service vessels done without retesting or records
How UrbanStat data helps.
Finished vessels stored in open yards and partly erected tank shells at job sites are vulnerable to wind. Shops near ports face hurricane and flood, and high-bay halls with heavy cranes suffer in tornadoes.
- Wind and hurricane scores at scheduled job site addresses help price field erection, where partly built tank shells stand exposed for weeks.
- Flood scores at the address show whether the shop yard, where finished vessels wait for shipment, sits in water's path.
- Peril scores returned in seconds through the risk analysis API let every scheduled job site be checked inside the quoting workflow.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
3.9 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.
1.3 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Metal tank (heavy gauge) manufacturing (NAICS 33242), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
46 fatal work injuries in 2024, most often from contact with objects and equipment (13).
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Fabricated Metal Product Manufacturing (NAICS 332), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
136 citations from 32 inspections; 62% were classed serious, willful or repeat.
- 1910.146 Permit-required confined spaces29
- 1910.134 Respiratory protection14
- 1910.212 General requirements for all machines9
- 1910.178 Powered industrial trucks7
- 1910.147 The control of hazardous energy (lockout/tagout)7
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Metal Tank (Heavy Gauge) Manufacturing (NAICS 332420). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
69 facilities reported toxic chemical releases totaling 521,427 pounds on and off site.
- Manganese compounds113,795
- Chromium102,661
- Manganese64,767
Chemicals released in the largest amounts, in pounds. 52 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Metal Tank (Heavy Gauge) Manufacturing (NAICS 332420). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Installation and transit floater
- Vessels and tanks remain the fabricator's risk during transit, setting and erection until the owner accepts them.
- Contractors pollution liability
- Field work at refineries and tank farms can release product or coatings, which general liability excludes.
- Product recall
- A material or weld defect found in a cylinder or vessel series forces costly recalls and retesting.
- Equipment breakdown
- Plate rolls, cranes and stress-relief furnaces are costly to repair and drive the delivery schedule.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.