Sandblasting contractorsNAICS 238990 · SIC 1799

Sandblasting contractors strip paint, rust and scale from steel, masonry, vehicles and equipment by firing abrasive at the surface with compressed air or water, in a shop blast room or on site. Dust is the product of the work: it harms lungs, drifts onto neighbors and may carry lead.

NAICS 238990 All Other Specialty Trade ContractorsSIC 1799 Special Trade Contractors, NECNAICS 332813 Electroplating, Plating, Polishing, Anodizing, and ColoringNAICS 332812 Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers+2 more codes

Construction · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Lung disease, lead poisoning and hearing loss among blasters

  2. 02

    Abrasive and dust drifting onto vehicles, buildings and waterways nearby

  3. 03

    Surfaces damaged by blasting too hard, or coatings failing over poor preparation

How it comparesEach line’s rating against the average for its NAICS sector, Construction (49 business types), and for all 747.
  1. PropertyProperty: Elevated, 3 of 5; sector average 2.2; all business types 2.9.
  2. Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 1.8; all business types 2.7.
  3. Premises liabilityPremises liability: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
  4. Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 3.8; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.8; all business types 3.0.
  6. Commercial autoCommercial auto: Elevated, 3 of 5; sector average 3.1; all business types 2.5.
  7. Crime and theftCrime and theft: Low, 1 of 5; sector average 1.7; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 3.2; all business types 2.6.
  9. EnvironmentalEnvironmental: High, 4 of 5; sector average 2.5; all business types 2.3.
  10. Cyber and dataCyber and data: Low, 1 of 5; sector average 2.0; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 2.3; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Elevated, 3 of 5; sector average 4.0; all business types 3.6.
What’s changing
  • Wet, dustless and dry ice blasting are replacing dry sand on many jobs, cutting dust drift and lung exposure but adding water runoff and slurry to manage.
  • Tighter silica and lead exposure rules raise the cost of air monitoring, medical checks and containment, and push smaller firms toward shortcuts or out of structural work.
  • Mobile blasting rigs sold to owner-operators bring many small, lightly trained entrants doing vehicles and homes, often without containment or pollution cover.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Elevated
Shop blast rooms run large compressors and dust collectors, usually next to a paint or powder-coating line.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Aluminum, magnesium or titanium blasted, producing dust that can explode
  • Paint spraying and solvent storage in the same building
  • Dust collectors indoors with no explosion venting
Controls that matter
  • Dust collectors outside or vented, with ducts cleaned on schedule
  • Spray booth and paint store separated from blasting by rated walls
  • Compressors serviced and air receivers inspected by a qualified person

Business interruption

Moderate
A blast room or large compressor is a bottleneck, but portable equipment is rentable within days.

How long and how costly a shutdown is.

Watch for
  • One blast room and one dust collector serving all shop work
Controls that matter
  • Portable pots and rental compressors available as backup

Premises liability

Elevated
Open-air blasting throws abrasive and old paint over whatever is downwind, and nozzles at pressure injure bystanders.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Bridges, tanks or building facades blasted in built-up areas
  • Mobile blasting in customers' driveways and parking lots
  • Lead or other heavy-metal paint on the surface
Controls that matter
  • Full containment with negative air on structures
  • Wind limits and screens for mobile work
  • Vehicles and neighbors' property covered or moved before starting

Products and completed work

Elevated
Blasting warps thin panels and erodes soft stone and brick, and a poor surface profile makes the coating fail.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Historic masonry, timber or thin sheet metal
  • Structural steel or tanks where coating life is specified
  • Customers' vehicles and classic car bodies
Controls that matter
  • Test patches agreed with the customer before full blasting
  • Surface profile and cleanliness measured and recorded
  • Media and pressure matched to the substrate

Workers’ injury

High
Blasters breathe fine dust, absorb lead from old paint, work in intense noise and handle hoses under high pressure.

Injuries and illness to employees.

Watch for
  • Silica sand still used as abrasive
  • Confined-space blasting in tanks, and work at height on bridges and towers
  • Breathing air from oil-lubricated compressors with no carbon monoxide alarm
Controls that matter
  • Low-silica media such as garnet, slag or steel grit
  • Supplied-air blast helmets with tested breathing air
  • Blood-lead and lung function monitoring, with deadman controls on nozzles

Commercial auto

Elevated
Trucks tow large diesel compressors and blast pots or carry bulk abrasive to job sites.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Heavy towed compressors with drivers lacking trailer experience
Controls that matter
  • Driving record checks plus brake and hitch inspections before each trip

Crime and theft

Low
Little cash and no attractive stock; portable compressors and trailers are the theft target.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Trailer-mounted rigs parked on the street or at open sites
Controls that matter
  • Hitch locks, trackers and fenced overnight parking

Inland marine and equipment

Elevated
Mobile rigs, compressors and containment gear live at job sites, and customers' parts and vehicles sit in the shop.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Customers' vehicles, machinery or fabricated steel held for days
  • Rigs left on bridges or tank sites between shifts
Controls that matter
  • Bailee cover sized to the highest value held
  • Equipment schedule kept current, with trackers on trailers

Environmental

High
Spent abrasive mixed with lead, chromium or antifouling paint is hazardous waste, and dust escapes easily.

Pollution on or from the site or the work.

Watch for
  • Lead paint removal over water or soil with partial containment
  • Spent media piled outdoors or used as fill
  • No testing of waste before disposal
Controls that matter
  • Paint tested for heavy metals before pricing the job
  • Ground covers and vacuum recovery of spent abrasive
  • Waste profiled and shipped under manifest to a licensed facility

Cyber and data

Low
Records are few: quotes, payroll and job photos. A ransomware hit delays invoicing but not the work itself.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Test results and waste manifests kept only on one laptop
Controls that matter
  • Cloud backup of job files, test results and waste manifests

Professional liability

Moderate
Firms test old paint for lead and certify surface profile to coating specifications; a wrong result shifts costly failures onto them.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • In-house lead testing or coating inspection sold as a separate service
Controls that matter
  • Lead testing by an accredited laboratory, with results kept in the job file
  • Calibrated profile gauges and signed inspection records at each stage

Umbrella and excess

Elevated
Lead dust settling on a neighborhood or school, or a towed compressor crash, can produce claims beyond primary limits.

How likely one liability event is to exhaust primary limits.

Watch for
  • Lead paint removal on bridges, water towers or homes near schools
Controls that matter
  • Full containment and air monitoring at the work boundary on lead jobs
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Usually a steel-frame or block industrial unit with a blast room, a high-bay door for vehicles and steel, and an outdoor yard for rigs and media.
Occupancy
Blasting with diesel or electric compressors and dust collectors, often beside a paint booth or powder-coating oven, with abrasive, solvents and coatings stored on site.
Protection
Dust collectors outside the building with explosion venting, a rated wall between blasting and painting, sprinklers or monitored detection, and a fenced, lit yard for rigs.
Exposure
Shops sit in industrial parks next to other trades, where escaping dust and noise bring complaints; open-air site work exposes whatever lies downwind.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: work performed

On site: shop

On site: site work

On site: people and equipment

Refer or decline if you find

  • Silica sand used as blasting media
  • Lead paint removal without containment or pollution cover
  • No medical surveillance for blasters
  • Combustible metal dust collected indoors without explosion protection
  • Spent abrasive dumped or stockpiled on site
05 / Location

How UrbanStat data helps.

Wind decides how far dust and abrasive travel and can tear containment sheeting off a structure. Floodwater reaching stockpiled spent media spreads contaminated grit, and trailer-mounted rigs are an easy theft from open yards.

WindFloodCrime
  • Wind scores at the shop or job address show how often open-air blasting and containment sheeting will face strong winds.
  • Flood scores at the shop address show whether stored spent abrasive and waste drums sit where water could carry them off site.
  • Parcel and permit data give the construction date of structures to be blasted, an early signal that old lead-based coatings are likely.
Wind · Flood · Crime
06 / Public loss data · NAICS 238990

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

1.6 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.

All other specialty trade contractors
1.6
All private industry
2.3

0.6 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: All other specialty trade contractors (NAICS 23899), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

33 fatal work injuries in 2024, most often from transportation incidents (13).

Construction
9.2
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: All Other Specialty Trade Contractors (NAICS 23899), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

1,052 citations from 362 inspections; 60% were classed serious, willful or repeat.

  • 1910.1200 Hazard communication
    56
  • 1926.501 Duty to have fall protection
    51
  • 1926.451 General requirements (scaffolds)
    43
  • 1910.134 Respiratory protection
    30
  • 1926.1153 Respirable crystalline silica
    29

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: All Other Specialty Trade Contractors (NAICS 238990). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

434 facilities reported toxic chemical releases totaling 9.3 million pounds on and off site.

  • Zinc compounds
    3.6M
  • Nitrate compounds
    1.5M
  • Chromium and chromium compounds
    778,336

Chemicals released in the largest amounts, in pounds. 198 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Electroplating, Plating, Polishing, Anodizing, and Coloring (NAICS 332813). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Contractors pollution liability
Lead and spent abrasive released on a job fall under the general liability pollution exclusion.
Bailee customers' goods
Customers' vehicles, machinery and fabricated steel sit in the shop for days and are damaged by over-blasting or fire.
Equipment breakdown
Large compressors, air dryers and dust collector fans fail without fire and stop shop and site work.
Employers liability limits
Silicosis and lead poisoning suits from former blasters can surface years later and reach beyond statutory benefits.

NAICS and SIC codes for sandblasting contractors

SystemCodeIndustry
NAICS 2022, primary238990All Other Specialty Trade Contractors
NAICS 2022332813Electroplating, Plating, Polishing, Anodizing, and Coloring
NAICS 2022332812Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers
SIC 1987, primary1799Special Trade Contractors, NEC
SIC 19873471Electroplating, Plating, Polishing, Anodizing, and Coloring
SIC 19873479Coating, Engraving, and Allied Services, NEC
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →