Roofing contractors
Roofing contractors strip, repair, coat and install shingle, tile, metal, single-ply membrane and built-up roofs on homes and commercial buildings. Crews work at the roof edge with torches, hot bitumen and heavy bundles, and every job opens a building to the weather until the new roof is tight.
Where losses come from.
- 01
Falls from roof edges, ladders and through skylights or fragile decking
- 02
Torch and hot-bitumen work igniting the customer's building, often hours after the crew leaves
- 03
Rain entering an open or poorly sealed roof, during the job or years later
- PropertyProperty: Moderate, 2 of 5; sector average 2.2; all business types 2.9.
- Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 1.8; all business types 2.7.
- Premises liabilityPremises liability: High, 4 of 5; sector average 3.5; all business types 2.7.
- Products and completed workProducts and completed work: High, 4 of 5; sector average 3.8; all business types 2.6.
- Workers’ injuryWorkers’ injury: Severe, 5 of 5; sector average 3.8; all business types 3.0.
- Commercial autoCommercial auto: Elevated, 3 of 5; sector average 3.1; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.7; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 3.2; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.5; all business types 2.3.
- Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.0; all business types 2.7.
- Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 2.3; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 4.0; all business types 3.6.
- Rooftop solar and battery installs put more electrical and penetration work on roofs, mixing fall, fire and leak exposures on the same job.
- Drones and aerial measurement cut the roof walks needed to estimate and inspect, reducing falls during sales visits but not during installation.
- Costlier hail and wind seasons draw storm-chasing crews and door-to-door claim selling, bringing rushed work, unlicensed labor and more disputes over damage.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ModerateThe yard and shop hold propane, adhesives, bitumen kettles and bundled materials, but values are modest next to the liability exposure.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Propane cylinders and solvent-based adhesives stored inside the shop
- Kettles and torches kept or refilled indoors
- Flammable adhesives in rated cabinets; cylinders caged outdoors
- Kettles cooled and parked clear of buildings and stock
Business interruption
ModerateWork stops for weather anyway and crews run from trucks, so losing the yard delays jobs more than it ends them.
How long and how costly a shutdown is.
- One specialized machine, such as a metal panel roll former, feeding every job
- Revenue concentrated in storm-repair surges
- Supplier direct-to-site delivery so jobs do not depend on yard stock
- Rental sources identified for hoists, kettles and lifts
Premises liability
HighTorch-applied membranes and hot bitumen start fires inside roof assemblies, and a stripped roof lets rain into occupied buildings.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Torch-down work on combustible decks or near wood nailers and flashings
- Tear-offs started with rain forecast and no temporary cover on hand
- Debris and bundles dropped where tenants and pedestrians walk
- Written hot-work procedure with a fire watch kept after torches go out
- Only as much roof opened as can be dried in that day
- Ground-level exclusion zones, chutes and catch protection
Products and completed work
HighLeaks, blow-offs and ponding show up seasons after completion, bringing water damage, mold and construction defect claims.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Flashing, penetration and drainage details improvised rather than built to manufacturer instructions
- Re-covering over wet insulation or a second existing roof
- Large residential tract or condominium work with long liability tails
- Crews certified by the membrane or shingle manufacturer for the systems installed
- Photos of deck, underlayment and flashings before they are covered
- Fastening patterns matched to the site's design wind speed
Workers’ injury
SevereFalls from height are the trade's leading killer, alongside burns from hot bitumen, heat stress and strains from carrying bundles.
Injuries and illness to employees.
- Steep-slope work without anchors, or flat-roof work without edge protection
- Piece-rate crews and uninsured labor-only subcontractors
- Unprotected skylights and roof openings
- Personal fall arrest, guardrails or warning lines on every roof, enforced by the foreman
- Hoists or conveyors to load roofs instead of carrying bundles up ladders
- Daily job briefing covering anchors, weather and heat
Commercial auto
ElevatedCrew trucks, dump trailers and kettle trailers travel daily to job sites, often heavy with tear-off debris.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Towing hot kettles or loaded dump trailers
- Storm-chasing crews driving long distances to unfamiliar areas
- Driver record checks and trailer-towing training
- Loads tarped and secured; weights checked against vehicle ratings
Crime and theft
ModerateCopper, metal coil and power tools draw thieves to yards and sites, and customer deposits pass through few hands.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Materials delivered to unattended sites days before work starts
- Large cash deposits collected by sales staff after storms
- Just-in-time delivery and locked storage on site
- Deposits paid by card or check and reconciled to contracts
Inland marine and equipment
ElevatedHoists, kettles, seam welders, nail guns and stacked materials sit on roofs and in driveways between shifts.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Membrane rolls and insulation left loose on the roof overnight
- Rented cranes, lifts or roll formers the contractor is responsible for
- Materials ballasted or tied down at the end of each day
- Equipment schedule kept current, with rented items covered by contract
Environmental
ElevatedTear-offs disturb asbestos-containing felts and cements, and adhesives, primers and coal-tar products create fume and runoff complaints.
Pollution on or from the site or the work.
- Old built-up roofs removed without sampling for asbestos
- Solvent-based primers and adhesives used near air intakes
- Roof materials tested before tear-off, with licensed abatement where needed
- Air intakes covered or shut down during fume-producing work
Cyber and data
ModerateEstimating, aerial measurement and lead apps hold customer and claim details; payment fraud on deposits and supplier bills is common.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Deposits and supplier payments changed by email instruction
- Customer claim documents shared through personal phones
- Callback checks before any change to payment details
- Multi-factor login on email, banking and estimating apps
Professional liability
ModerateOwners, buyers and adjusters rely on roofers' storm-damage inspections and condition reports; most system design comes from manufacturers.
Loss or injury caused by advice, design, testing, care or another professional service.
- Roof condition or damage reports sold for property sales or insurance claims
- Contractor-designed wind uplift or drainage on commercial roofs
- Reports that state what was inspected, with dated photos
- Commercial roof design taken from manufacturer or engineer details
Umbrella and excess
HighA torch fire that destroys an occupied building, or a roof collapse onto tenants, can exceed primary limits in one event.
How likely one liability event is to exhaust primary limits.
- Torch-down or hot-asphalt work on occupied commercial buildings
- Large multi-unit residential and condominium re-roofs
- Torch work barred on combustible decks and near concealed spaces
- Excess limits matched to the largest building values worked on
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Usually a yard with a metal shop building, outdoor material storage, parking for kettles and trailers, and sometimes a roll-forming bay for metal panels.
- Occupancy
- Propane, solvent-based adhesives, primers and asphalt stored with bundled shingles, insulation boards and membrane rolls, plus kettles and torches returned from jobs.
- Protection
- Cylinders caged outdoors, flammable adhesives in rated cabinets, kettles parked clear of buildings, extinguishers on every truck, and a fenced, lit yard with cameras.
- Exposure
- Yards are often in mixed industrial areas; the larger exposure is customers' buildings, open to rain and torch flame while the old roof is off.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: work performed
On site: job sites
On site: equipment and vehicles
On site: records and history
Refer or decline if you find
- Torch-applied roofing with no written hot-work procedure or fire watch
- No fall protection program, or citations for missing fall protection
- Labor supplied by uninsured subcontractors paid per square
- Tear-offs left open overnight without temporary covering
- Door-to-door storm work far from the home territory
How UrbanStat data helps.
Hail and wind storms create the work and also threaten it: half-finished roofs and stacked materials sit exposed, and demand surges pull crews into unfamiliar areas. Yards and unattended sites lose copper, tools and trailers to theft.
- Hail and wind scores at each job address show where open roofs and staged materials face the most weather exposure, useful when setting installation and liability terms.
- Live hurricane track overlays show which insured yards and active job sites are in the path, so open-roof exposures can be flagged before landfall.
- Crime scores at the yard address inform theft terms for copper, coil stock, tools and trailers kept outdoors.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
2.4 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.
1.1 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Roofing contractors (NAICS 23816), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
120 fatal work injuries in 2024, most often from falls, slips and trips (96).
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Roofing Contractors (NAICS 23816), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
16,028 citations from 5,779 inspections; 82% were classed serious, willful or repeat.
- 1926.501 Duty to have fall protection4,449
- 1926.1053 Ladders2,055
- 1926.503 Training requirements (fall protection)1,963
- 1926.102 Eye and face protection1,119
- 1926.502 Fall protection systems criteria and practices706
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Roofing Contractors (NAICS 238160). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Contractors' pollution liability
- Asbestos disturbed during tear-off and adhesive fumes drawn into air intakes fall under pollution exclusions.
- Installation floater
- Membrane, insulation and shingles staged on roofs stay at the roofer's risk until the roof is accepted.
- Hired and non-owned auto
- Storm crews and salespeople drive their own vehicles to inspections and job sites.
- Rented equipment cover
- Cranes, lifts and roll formers rented by the job are the roofer's responsibility under the rental contract.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.