---
title: "Roofing contractors: Industry Risk Guide"
description: "Roofing contractors strip, repair, coat and install shingle, tile, metal, single-ply membrane and built-up roofs on homes and commercial buildings. Crews…"
url: https://www.urbanstat.com/industry-risk-guides/roofing-contractors/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Roofing contractors

Roofing contractors strip, repair, coat and install shingle, tile, metal, single-ply membrane and built-up roofs on homes and commercial buildings. Crews work at the roof edge with torches, hot bitumen and heavy bundles, and every job opens a building to the weather until the new roof is tight.

Construction · NAICS 238160 · SIC 1761 · Updated November 2026

Risk profile

1. [Property Moderate](#line-property)
2. [Business interruption Moderate](#line-bi)
3. [Premises liability High](#line-gl)
4. [Products and completed work High](#line-products)
5. [Workers’ injury Severe](#line-wc)
6. [Commercial auto Elevated](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental Elevated](#line-env)
10. [Cyber and data Moderate](#line-cyber)
11. [Professional liability Moderate](#line-prof)
12. [Umbrella and excess High](#line-umbrella)

**Workers’ injury.** Falls from height are the trade's leading killer, alongside burns from hot bitumen, heat stress and strains from carrying bundles.

Loss drivers

## Where losses come from.

1. Falls from roof edges, ladders and through skylights or fragile decking
2. Torch and hot-bitumen work igniting the customer's building, often hours after the crew leaves
3. Rain entering an open or poorly sealed roof, during the job or years later

How it compares Each line’s rating against the average for its NAICS sector, Construction (49 business types), and for all 747.

- Roofing contractors
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Moderate, 2 of 5; sector average 2.2; all business types 2.9.
2. Business interruption Interruption Business interruption: Moderate, 2 of 5; sector average 1.8; all business types 2.7.
3. Premises liability Premises Premises liability: High, 4 of 5; sector average 3.5; all business types 2.7.
4. Products and completed work Products Products and completed work: High, 4 of 5; sector average 3.8; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Severe, 5 of 5; sector average 3.8; all business types 3.0.
6. Commercial auto Auto Commercial auto: Elevated, 3 of 5; sector average 3.1; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.7; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 3.2; all business types 2.6.
9. Environmental Environmental Environmental: Elevated, 3 of 5; sector average 2.5; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Moderate, 2 of 5; sector average 2.0; all business types 2.7.
11. Professional liability Professional Professional liability: Moderate, 2 of 5; sector average 2.3; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: High, 4 of 5; sector average 4.0; all business types 3.6.

What’s changing

- Rooftop solar and battery installs put more electrical and penetration work on roofs, mixing fall, fire and leak exposures on the same job.
- Drones and aerial measurement cut the roof walks needed to estimate and inspect, reducing falls during sales visits but not during installation.
- Costlier hail and wind seasons draw storm-chasing crews and door-to-door claim selling, bringing rushed work, unlicensed labor and more disputes over damage.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Moderate (2 of 5)

The yard and shop hold propane, adhesives, bitumen kettles and bundled materials, but values are modest next to the liability exposure.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Propane cylinders and solvent-based adhesives stored inside the shop
- Kettles and torches kept or refilled indoors

**Controls that matter**

- Flammable adhesives in rated cabinets; cylinders caged outdoors
- Kettles cooled and parked clear of buildings and stock

### Business interruption: Moderate (2 of 5)

Work stops for weather anyway and crews run from trucks, so losing the yard delays jobs more than it ends them.

Covers: How long and how costly a shutdown is.

**Watch for**

- One specialized machine, such as a metal panel roll former, feeding every job
- Revenue concentrated in storm-repair surges

**Controls that matter**

- Supplier direct-to-site delivery so jobs do not depend on yard stock
- Rental sources identified for hoists, kettles and lifts

### Premises liability: High (4 of 5)

Torch-applied membranes and hot bitumen start fires inside roof assemblies, and a stripped roof lets rain into occupied buildings.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Torch-down work on combustible decks or near wood nailers and flashings
- Tear-offs started with rain forecast and no temporary cover on hand
- Debris and bundles dropped where tenants and pedestrians walk

**Controls that matter**

- Written hot-work procedure with a fire watch kept after torches go out
- Only as much roof opened as can be dried in that day
- Ground-level exclusion zones, chutes and catch protection

### Products and completed work: High (4 of 5)

Leaks, blow-offs and ponding show up seasons after completion, bringing water damage, mold and construction defect claims.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Flashing, penetration and drainage details improvised rather than built to manufacturer instructions
- Re-covering over wet insulation or a second existing roof
- Large residential tract or condominium work with long liability tails

**Controls that matter**

- Crews certified by the membrane or shingle manufacturer for the systems installed
- Photos of deck, underlayment and flashings before they are covered
- Fastening patterns matched to the site's design wind speed

### Workers’ injury: Severe (5 of 5)

Falls from height are the trade's leading killer, alongside burns from hot bitumen, heat stress and strains from carrying bundles.

Covers: Injuries and illness to employees.

**Watch for**

- Steep-slope work without anchors, or flat-roof work without edge protection
- Piece-rate crews and uninsured labor-only subcontractors
- Unprotected skylights and roof openings

**Controls that matter**

- Personal fall arrest, guardrails or warning lines on every roof, enforced by the foreman
- Hoists or conveyors to load roofs instead of carrying bundles up ladders
- Daily job briefing covering anchors, weather and heat

### Commercial auto: Elevated (3 of 5)

Crew trucks, dump trailers and kettle trailers travel daily to job sites, often heavy with tear-off debris.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Towing hot kettles or loaded dump trailers
- Storm-chasing crews driving long distances to unfamiliar areas

**Controls that matter**

- Driver record checks and trailer-towing training
- Loads tarped and secured; weights checked against vehicle ratings

### Crime and theft: Moderate (2 of 5)

Copper, metal coil and power tools draw thieves to yards and sites, and customer deposits pass through few hands.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Materials delivered to unattended sites days before work starts
- Large cash deposits collected by sales staff after storms

**Controls that matter**

- Just-in-time delivery and locked storage on site
- Deposits paid by card or check and reconciled to contracts

### Inland marine and equipment: Elevated (3 of 5)

Hoists, kettles, seam welders, nail guns and stacked materials sit on roofs and in driveways between shifts.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Membrane rolls and insulation left loose on the roof overnight
- Rented cranes, lifts or roll formers the contractor is responsible for

**Controls that matter**

- Materials ballasted or tied down at the end of each day
- Equipment schedule kept current, with rented items covered by contract

### Environmental: Elevated (3 of 5)

Tear-offs disturb asbestos-containing felts and cements, and adhesives, primers and coal-tar products create fume and runoff complaints.

Covers: Pollution on or from the site or the work.

**Watch for**

- Old built-up roofs removed without sampling for asbestos
- Solvent-based primers and adhesives used near air intakes

**Controls that matter**

- Roof materials tested before tear-off, with licensed abatement where needed
- Air intakes covered or shut down during fume-producing work

### Cyber and data: Moderate (2 of 5)

Estimating, aerial measurement and lead apps hold customer and claim details; payment fraud on deposits and supplier bills is common.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Deposits and supplier payments changed by email instruction
- Customer claim documents shared through personal phones

**Controls that matter**

- Callback checks before any change to payment details
- Multi-factor login on email, banking and estimating apps

### Professional liability: Moderate (2 of 5)

Owners, buyers and adjusters rely on roofers' storm-damage inspections and condition reports; most system design comes from manufacturers.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Roof condition or damage reports sold for property sales or insurance claims
- Contractor-designed wind uplift or drainage on commercial roofs

**Controls that matter**

- Reports that state what was inspected, with dated photos
- Commercial roof design taken from manufacturer or engineer details

### Umbrella and excess: High (4 of 5)

A torch fire that destroys an occupied building, or a roof collapse onto tenants, can exceed primary limits in one event.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Torch-down or hot-asphalt work on occupied commercial buildings
- Large multi-unit residential and condominium re-roofs

**Controls that matter**

- Torch work barred on combustible decks and near concealed spaces
- Excess limits matched to the largest building values worked on

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Usually a yard with a metal shop building, outdoor material storage, parking for kettles and trailers, and sometimes a roll-forming bay for metal panels.
- **Occupancy**: Propane, solvent-based adhesives, primers and asphalt stored with bundled shingles, insulation boards and membrane rolls, plus kettles and torches returned from jobs.
- **Protection**: Cylinders caged outdoors, flammable adhesives in rated cabinets, kettles parked clear of buildings, extinguishers on every truck, and a fenced, lit yard with cameras.
- **Exposure**: Yards are often in mixed industrial areas; the larger exposure is customers' buildings, open to rain and torch flame while the old roof is off.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What is the split between residential and commercial, and between new, re-roof and repair work?
- What share of work is subcontracted, and do subcontractors carry their own workers' comp and liability?
- Does the firm follow storms into other areas, and how much revenue comes from storm repair?
- What are the largest building and tallest roof worked on in recent years?
- What do five years of claims show for falls, fires and water damage?

### Documents to request

- Loss runs for all lines for the last five years
- Written hot-work and fall protection procedures
- Manufacturer certifications for the roof systems installed
- Subcontract agreements and certificates of insurance
- Driver list with motor vehicle records

### On site: work performed

- Which roof systems are installed, and are any applied with open flame or hot bitumen?
- Does the firm install solar panels, skylights or roof coatings?

### On site: job sites

- What fall protection is used on steep and low-slope roofs, and who enforces it?
- How long is a fire watch kept after torch work, and who signs it off?
- How much roof is opened in a day, and what temporary cover is carried?
- How are pedestrians, tenants and parked cars protected from falling debris?

### On site: equipment and vehicles

- Which trucks tow kettles or dump trailers, and who is allowed to drive them?
- How are materials and equipment secured on the roof overnight and in high wind?
- Which hoists, conveyors or cranes load roofs, and who operates them?

### On site: records and history

- Are pre-covering photos, manufacturer inspections and warranties kept for each job?
- How are older roofs sampled for asbestos before tear-off, and by whom?

### Refer or decline if you find

- Torch-applied roofing with no written hot-work procedure or fire watch
- No fall protection program, or citations for missing fall protection
- Labor supplied by uninsured subcontractors paid per square
- Tear-offs left open overnight without temporary covering
- Door-to-door storm work far from the home territory

Location

## How UrbanStat data helps.

Hail and wind storms create the work and also threaten it: half-finished roofs and stacked materials sit exposed, and demand surges pull crews into unfamiliar areas. Yards and unattended sites lose copper, tools and trailers to theft.

Hail · Wind · Hurricane · Tornado · Crime

- Hail and wind scores at each job address show where open roofs and staged materials face the most weather exposure, useful when setting installation and liability terms.
- Live hurricane track overlays show which insured yards and active job sites are in the path, so open-roof exposures can be flagged before landfall.
- Crime scores at the yard address inform theft terms for copper, coil stock, tools and trailers kept outdoors.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Hail · Wind · Hurricane · Tornado

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**2.4** recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Roofing contractors

**2.4**

All private industry

**2.3**

1.1 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Roofing contractors (NAICS 23816), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**120** fatal work injuries in 2024, most often from falls, slips and trips (96).

Construction

**9.2**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Roofing Contractors (NAICS 23816), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**16,028** citations from 5,779 inspections; 82% were classed serious, willful or repeat.

- 1926.501 Duty to have fall protection **4,449**
- 1926.1053 Ladders **2,055**
- 1926.503 Training requirements (fall protection) **1,963**
- 1926.102 Eye and face protection **1,119**
- 1926.502 Fall protection systems criteria and practices **706**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Roofing Contractors (NAICS 238160). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Contractors' pollution liability**: Asbestos disturbed during tear-off and adhesive fumes drawn into air intakes fall under pollution exclusions.
- **Installation floater**: Membrane, insulation and shingles staged on roofs stay at the roofer's risk until the roof is accepted.
- **Hired and non-owned auto**: Storm crews and salespeople drive their own vehicles to inspections and job sites.
- **Rented equipment cover**: Cranes, lifts and roll formers rented by the job are the roofer's responsibility under the rental contract.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [238160](https://www.urbanstat.com/industry-risk-guides/naics/?q=238160) | Roofing Contractors |
| SIC 1987, primary | [1761](https://www.urbanstat.com/industry-risk-guides/sic/?q=1761) | Roofing, Siding, and Sheet Metal Work |

**Related business types**

- [Siding contractors](https://www.urbanstat.com/industry-risk-guides/siding-contractors/)
- [Sheet metal shops and contractors](https://www.urbanstat.com/industry-risk-guides/sheet-metal-shops-and-contractors/)
- [Waterproofing contractors](https://www.urbanstat.com/industry-risk-guides/waterproofing-contractors/)
- [Solar panel installers](https://www.urbanstat.com/industry-risk-guides/solar-panel-installers/)
- [Carpentry contractors](https://www.urbanstat.com/industry-risk-guides/carpentry-contractors/)
- [Compare Roofing contractors with Siding contractors](https://www.urbanstat.com/industry-risk-guides/compare/?a=roofing-contractors&b=siding-contractors)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/roofing-contractors/

- Page: Roofing contractors: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/roofing-contractors/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
