Pen and pencil manufacturers

Pen and pencil manufacturers mold plastic barrels, machine metal tips, blend inks and fill refills, or groove, glue and lacquer wooden slats around graphite cores. Solvent inks, lacquers, wood dust and plastics give the plants a serious fire load, while the products themselves are cheap and rarely harmful.

Manufacturing · NAICS 339940 · SIC 3951 · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Fires in lacquer coating lines, solvent ink rooms and wood dust systems

  2. 02

    Machine injuries at molding presses, tip-making machines and slat saws

  3. 03

    Long outages when custom assembly lines or molds are destroyed

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: Moderate, 2 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Low, 1 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Low, 1 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Moderate, 2 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Short-run promotional pens ordered online with customer-supplied logos bring trademark complaints over artwork the buyer had no right to use.
  • Buyers and children's product rules demand testing of inks and coatings for heavy metals and solvents, raising recall stakes when a supplier changes pigments.
  • Water-based and low-solvent inks reduce plant fire load, while gel and specialty inks bring new chemicals with less exposure data behind them.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

High
Pencil lines combine cedar dust with repeated lacquer coats, while marker plants blend and fill alcohol-based inks beside plastics.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Lacquer dip and drying tunnels with residue build-up
  • Solvent ink mixing and filling outside a cut-off, ventilated room
  • Wood dust collectors and ducts without spark detection
Controls that matter
  • Explosion-proof wiring, grounding and ventilation in ink and lacquer areas
  • Sprinklers designed for plastics storage, extended into booths, tunnels and ducts
  • Flammable liquids piped from a detached or cut-off store

Business interruption

Elevated
High-speed assembly and tip-forming machines are purpose-built, and school-season orders cannot be made up later.

How long and how costly a shutdown is.

Watch for
  • One line producing the main product with no spare capacity
  • Multi-cavity molds with long replacement lead times
Controls that matter
  • Critical spares and duplicate molds held away from production
  • Sister plants or contract fillers able to take volume

Premises liability

Low
Factories have little public contact; outlets or tours are rare.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Factory tours for schools or the public
Controls that matter
  • Guided routes behind barriers away from machinery

Products and completed work

Moderate
Injuries are rare and minor: swallowed caps, ink stains and irritation, and heavy-metal limits on coatings for children's items.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Solid pen caps without ventilation holes
  • Imported pigments or lacquers with no heavy-metal certificates
  • Laser pointer or light-up novelty pens with button batteries
Controls that matter
  • Vented caps on products children are likely to use
  • Toxicological review and labeling of inks and coatings

Workers’ injury

Elevated
Injection presses, tip grinders, saws and groovers cause hand injuries; solvents, graphite and wood dust affect breathing.

Injuries and illness to employees.

Watch for
  • Operators clearing jams on running assembly machines
  • Hand-fed slat saws and groovers
Controls that matter
  • Interlocked guards and lockout for clearing jams
  • Local exhaust at ink filling, lacquering and sanding

Commercial auto

Low
Product ships by carrier; few company vehicles.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Sales staff with company cars over wide territories
Controls that matter
  • Driving record checks and a vehicle use policy

Crime and theft

Moderate
Most stock is low value, but luxury pens with gold nibs and precious-metal trim are attractive.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Gold nibs, plating metal and finished luxury pens left unsecured
Controls that matter
  • Safe and reconciled issue for precious components

Inland marine and equipment

Low
Goods leave by carrier on standard terms; little else is off premises.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Molds or printing plates held at outside contractors
Controls that matter
  • Tooling schedule showing location and responsible party

Environmental

Elevated
Solvent inks, lacquers, plating baths for metal trim and cutting oils mean regulated emissions and hazardous waste.

Pollution on or from the site or the work.

Watch for
  • Underground or outdoor solvent tanks of unknown age
  • Electroplating of clips and barrels on site
Controls that matter
  • Solvent recovery, diked storage and emission permits kept current
  • Licensed disposal of ink and lacquer waste

Cyber and data

Moderate
Molding and assembly lines run on local controls; ransomware mainly halts order entry, retailer ordering and logo artwork for promotional pens.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Promotional pen orders and customer logo files taken through a web portal
  • Retailer order and shipping systems with no offline fallback
Controls that matter
  • Offline backups of order, artwork and machine program files
  • Multi-factor login for portals, email and remote machine support

Professional liability

Low
No advice or design service is sold; imprint errors on promotional pens are contract disputes, not professional claims.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Pen design or engineering done for other brands under contract
Controls that matter
  • Written specifications and signed-off samples before production runs

Umbrella and excess

Moderate
Liability claims are small and isolated; a child choking on a pen cap is the rare severe case.

How likely one liability event is to exhaust primary limits.

Watch for
  • Products marketed to young children or sold through toy channels
  • Private-label pens sold in very large volumes through mass retailers
Controls that matter
  • Vented caps and age labeling across all children's lines
  • Lot coding that limits any recall to known production runs
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Single-story steel-frame or masonry plants, often older, with molding halls, ink and lacquer rooms, woodworking areas for slats and warehouses of boxed stock.
Occupancy
Injection molding of barrels, solvent ink blending, kiln-fired pencil leads soaked in hot wax, cedar slat sawing, lacquer dip and drying tunnels, and racked cartons of finished pens.
Protection
Sprinklers throughout including tunnels and ducts, cut-off ink and lacquer rooms with vapor-rated wiring, spark detection on dust collection, and monitored alarms.
Exposure
Plants usually sit in light industrial parks; shared walls with other manufacturers and outdoor pallet or resin silo storage add fire exposure both ways.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: products and processes

On site: fire protection

On site: machinery and continuity

On site: records and history

Refer or decline if you find

  • Lacquer coating with ordinary electrical equipment and no ventilation
  • Solvent ink blending in the open production area
  • Dust collector indoors with no explosion relief
  • Novelty pens containing loose button batteries
05 / Location

How UrbanStat data helps.

A plant that loses production before the back-to-school season cannot recover those sales. Flooding reaches solvent stores and machine foundations, and wind or hail damage to the roof wets paper packaging and wood slats.

FloodWindTornadoHail
  • Flood scores at the address show whether solvent stores, machine pits and slat stock at floor level are exposed before limits are set.
  • Parcel and permit data show construction date and permit history, helping confirm when coating lines, ink rooms or dust collection were added.
  • Street-by-street exposure views show what other insured plants and warehouses surround a solvent-using factory, with alerts when the accumulation passes a set threshold.
Flood · Wind · Tornado · Hail
06 / Public loss data

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

1.7 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.

Office supplies (except paper) manufacturing
1.7
All private industry
2.3

0.7 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Office supplies (except paper) manufacturing (NAICS 33994), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

6 fatal work injuries in 2024.

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Other Miscellaneous Manufacturing (NAICS 3399), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

784 citations from 216 inspections; 59% were classed serious, willful or repeat.

  • 1910.1200 Hazard communication
    105
  • 1910.134 Respiratory protection
    100
  • 1910.147 The control of hazardous energy (lockout/tagout)
    39
  • 1910.212 General requirements for all machines
    37
  • 1910.178 Powered industrial trucks
    31

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Other Miscellaneous Manufacturing (NAICS 3399), the closest published group. Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

8 facilities reported toxic chemical releases totaling 170,225 pounds on and off site.

  • Toluene
    128,070
  • N-butyl alcohol
    40,898
  • N-hexane
    859

Chemicals released in the largest amounts, in pounds.

United States, 2024. Industry: Office Supplies (except Paper) Manufacturing (NAICS 339940). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Product recall
Heavy-metal findings in coatings or a cap design fault can force a recall across retail chains.
Equipment breakdown
Molding presses, tip-forming machines and assembly lines fail mechanically or electrically and stop the main product.
Ocean cargo
Imported nibs, refills and finished pens travel by sea, often at the buyer's risk from the port of loading.
Pollution legal liability
Older plants with solvent tanks or past plating work can carry soil contamination that predates the policy.
Classification
SystemCodeIndustry
NAICS 2022, primary339940Office Supplies (except Paper) Manufacturing
SIC 1987, primary3951Pens, Mechanical Pencils, and Parts
SIC 19873952Lead Pencils and Art Goods
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →