Medical device manufacturers
Medical device manufacturers make surgical instruments, implants, catheters and syringes, electromedical and imaging equipment, hospital furniture and dental supplies, often in clean rooms with validated sterilization. The products enter or treat the body, so a design, material or sterility failure can injure many patients and bring recalls and mass litigation.
Where losses come from.
- 01
Patient injuries from implant, device or software failures, often pursued as mass claims
- 02
Recalls and production holds after sterility, contamination or quality system findings
- 03
Ethylene oxide fires, explosions and emissions at in-house or contract sterilizers
- PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Severe, 5 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Moderate, 2 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Elevated, 3 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: High, 4 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Elevated, 3 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: Severe, 5 of 5; sector average 3.6; all business types 3.6.
- Regulators now expect cybersecurity in connected devices, so a software vulnerability can force a recall or field correction with no physical failure.
- Limits on ethylene oxide emissions are closing or restricting sterilizers, squeezing capacity and pushing makers to revalidate products on other methods.
- 3D-printed implants and patient-specific guides add design responsibility for each case, widening product and professional exposure for smaller makers.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ElevatedClean rooms, molding, machining and electronics assembly hold costly work in progress, and in-house ethylene oxide sterilization adds an explosion hazard.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Ethylene oxide chambers or aeration rooms without explosion protection
- Titanium or cobalt-chrome fines from implant machining collected dry
- Plastic-paneled clean rooms without sprinklers above the ceilings
- Ethylene oxide stored and used in detached, monitored, explosion-protected rooms
- Wet collection and housekeeping for combustible metal dust
- Sprinklers in clean rooms and plenums with very early smoke detection
Business interruption
HighLines, sites and sterilizers are named in regulatory files, so replacing capacity means revalidation, and sterilization capacity is scarce.
How long and how costly a shutdown is.
- One contract sterilizer handling every product
- Leading products made at a single validated site
- Imaging magnets, detectors or tubes from one supplier
- Second validated sterilization method or supplier for key products
- Finished stock held at a separate distribution site
- Continuity plan covering regulatory requalification steps
Premises liability
ModerateFew visitors come to plants, but service engineers work inside hospitals and clinicians train on equipment at company sites.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Field engineers installing and servicing equipment in patient areas
- Surgeon training labs using cadavers, lasers or live equipment
- Hospital permit and infection control rules followed on every service visit
- Training labs with written safety rules and supervised equipment use
Products and completed work
SevereDevices are implanted in, inserted into or used to treat patients, and design or sterility failures bring mass torts and costly recalls.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Permanent implants, life-sustaining devices or products for children
- Devices cleared by comparison to older products with little clinical data
- Contract manufacturing for other brands with unclear indemnities
- Quality system with design controls, risk files and independent release
- Complaint handling and adverse event reporting reviewed for trends
- Unique device identifiers and lot traceability to each hospital
Workers’ injury
ModerateWork is mostly clean assembly, molding and machining, with ethylene oxide, radiation and repetitive inspection as the specific exposures.
Injuries and illness to employees.
- Staff unloading sterilizers or aeration rooms
- Long shifts of fine assembly under magnification
- Ethylene oxide area monitoring and personal badges for exposed staff
- Task rotation and adjustable workstations in assembly
Commercial auto
ModerateSales representatives and clinical specialists drive large territories daily, often carrying instrument sets and implants between hospitals.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Reps driving long distances between early-morning surgeries
- Field engineers carrying heavy parts in personal vehicles
- Driving record checks, telematics and fatigue rules for field staff
- Hired and non-owned auto cover for employees' own cars
Crime and theft
ElevatedImplants, loaner kits and precious metal leads are compact and valuable, and gray-market diversion and counterfeiting target branded devices.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Implants and kits left in vehicles overnight
- Returned and expired product not destroyed under supervision
- Tracked kit cases and rules against overnight vehicle storage
- Witnessed destruction of rejects and serialized packaging
Inland marine and equipment
ElevatedConsigned implants sit on hospital shelves, loaner sets move daily, and imaging systems ride on transit and installation cover.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Consigned stock at many hospitals with weak cycle counts
- Imaging magnets and gantries moved and rigged into hospitals
- Consignment counts reconciled with each hospital on a schedule
- Specialist riggers and shock recorders for imaging installations
Environmental
ElevatedEthylene oxide emissions bring neighbor exposure claims, and machining coolants, cleaning solvents and radioactive sources add waste and contamination risks.
Pollution on or from the site or the work.
- In-house ethylene oxide sterilization near homes or schools with limited emission controls
- Sealed radioactive sources in irradiators or test equipment
- Emission abatement on sterilizer and aeration exhaust with stack testing
- Licensed handling, inventory and disposal of radioactive sources
Cyber and data
HighConnected pumps, monitors, implants and imaging systems can be attacked to harm patients, and remote monitoring holds large volumes of health data.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Devices with wireless links, remote monitoring or cloud software
- Patient data collected through apps or device telemetry
- Security designed into devices, with a process for patching reported flaws
- Encrypted, access-controlled patient data with tested incident response
Professional liability
ElevatedClinical specialists advise surgeons in operating rooms, and monitoring services and software interpret patient data that clinicians rely on.
Loss or injury caused by advice, design, testing, care or another professional service.
- Company staff present in surgery advising on device use
- Remote cardiac or diagnostic monitoring sold as a service
- Written limits on what field staff may advise during procedures
- Clinical oversight and documented escalation for monitoring services
Umbrella and excess
SevereOne implant or device defect can injure patients across many hospitals, producing consolidated litigation that exhausts primary and excess layers.
How likely one liability event is to exhaust primary limits.
- Permanent implants or devices in very wide use
- Past recalls, safety notices or pending group litigation
- Post-market surveillance that tracks failures by lot and design version
- Clear labeling, warnings and user training requirements for every product
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Single-story steel or concrete plants, often converted older buildings, with clean rooms built inside from insulated panels, some with foam cores, and concealed service spaces above the clean-room ceilings.
- Occupancy
- Machining of metals, molding of plastics, electronics assembly, cleaning, packaging and sterilization, with flammable gas, solvents and costly work in progress in validated spaces.
- Protection
- Sprinklers throughout, including clean rooms and plenums, detached and explosion-protected sterilizers, gas detection, very early smoke detection, standby power and controlled access.
- Exposure
- Industrial or office parks with shared walls and roofs; nearby housing and schools turn sterilizer emissions into neighbor claims, and adjoining fires ruin clean rooms by smoke.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: products and quality
On site: plant and sterilization
On site: field and people
On site: records and history
Refer or decline if you find
- Open regulatory warning or import restriction on the site
- Ethylene oxide used in attached rooms without explosion protection
- Implants with rising revision or failure complaints and no investigation
- Sole contract sterilizer under emissions enforcement
- Complaint files closed without root cause analysis
How UrbanStat data helps.
Device plants cluster in a few regions, some exposed to hurricanes and earthquakes, and a long power outage breaks clean-room conditions. Reps' vehicles carrying implants and kits make local crime rates relevant.
- Hurricane and flood scores at the address show how exposed clean rooms, sterilizers and finished stock are before property and interruption terms are set.
- Street-by-street portfolio views show accumulations where several device plants and contract sterilizers cluster, with alerts when insured value passes a set threshold.
- Live hurricane track overlays show which insured plants and sterilizers sit in a storm's path while it approaches.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
1.5 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.
0.3 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Surgical and medical instrument manufacturing (NAICS 339112). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
4 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Medical Equipment and Supplies Manufacturing (NAICS 33911), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
55 citations from 17 inspections; 58% were classed serious, willful or repeat.
- 1910.1200 Hazard communication6
- 1910.1048 Formaldehyde6
- 1910.305 Wiring methods, components, and equipment for general use5
- 1910.147 The control of hazardous energy (lockout/tagout)4
- 1910.157 Portable fire extinguishers3
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Surgical and Medical Instrument Manufacturing (NAICS 339112). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
64 facilities reported toxic chemical releases totaling 530,340 pounds on and off site.
- N-methyl-2-pyrrolidone95,199
- Dichloromethane92,301
- Methanol63,282
Chemicals released in the largest amounts, in pounds. 39 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Surgical and Medical Instrument Manufacturing (NAICS 339112). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Product recall
- Recalls of implants or devices bring notification, retrieval and replacement costs that general liability does not cover.
- Clinical trials liability
- Device trials can injure participants before approval, and products policies often exclude trial subjects.
- Contingent business interruption
- A contract sterilizer or sole component supplier closing stops shipments across product lines.
- Directors and officers
- Recalls and regulatory findings are often followed by investor and securities claims against management.
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 339112 | Surgical and Medical Instrument Manufacturing |
| NAICS 2022 | 339113 | Surgical Appliance and Supplies Manufacturing |
| NAICS 2022 | 334510 | Electromedical and Electrotherapeutic Apparatus Manufacturing |
| NAICS 2022 | 334517 | Irradiation Apparatus Manufacturing |
| NAICS 2022 | 339114 | Dental Equipment and Supplies Manufacturing |
| SIC 1987, primary | 3841 | Surgical and Medical Instruments and Apparatus |
| SIC 1987 | 3842 | Orthopedic, Prosthetic, and Surgical Appliances and Supplies |
| SIC 1987 | 3845 | Electromedical and Electrotherapeutic Apparatus |
| SIC 1987 | 3844 | X-Ray Apparatus and Tubes and Related Irradiation Apparatus |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.