Lamp and lighting fixture manufacturers

Lighting fixture makers stamp, spin, cast, finish and wire metal, glass, wood and fabric parts into table and floor lamps, chandeliers, ceiling fixtures and commercial luminaires, now mostly with LED drivers. Every unit is a mains-powered product installed for years near combustibles or above people.

Manufacturing · NAICS 335131 · SIC 3645 · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Fires and shocks traced to wiring, sockets, drivers or overheated shades

  2. 02

    Fires in spray finishing, buffing and shade-making areas of the plant

  3. 03

    Hand, eye and strain injuries at presses, spinning lathes and assembly benches

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • LED fixtures replace bulbs with built-in drivers, so overheating electronics and failed drivers replace loose sockets as the main product fault.
  • Smart fixtures, occupancy sensors and lighting controls add firmware, apps and data to a product that used to be a simple wired appliance.
  • More finished lamps and components are imported and sold online under small brands, widening the gap between the label and the factory that made them.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Elevated
Lacquer spraying, buffing lint, shade fabrics and adhesives, wood turning and stacked cartons make a mixed, moderately combustible plant.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Spray finishing with flammable lacquers outside a proper booth
  • Buffing dust and lint accumulating in hoods and ducts
  • Shade fabric, paper and foam packaging stored high
Controls that matter
  • Sprinklered spray booths with overspray filters changed on schedule
  • Separate dust collection for buffing, cleaned regularly
  • Sprinklers matched to carton and plastic storage heights

Business interruption

Moderate
General-purpose presses and benches are replaceable, though imported components and seasonal retail orders can be lost after a shutdown.

How long and how costly a shutdown is.

Watch for
  • Most parts imported with long shipping times
  • Custom molds or spinning tools held at one location
Controls that matter
  • Buffer stock of sockets, cord sets and drivers
  • Duplicate tooling or drawings for best-selling designs

Premises liability

Low
Few visitors beyond buyers and designers, unless a factory showroom is open to the public.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Factory outlet with displays wired and hung overhead
Controls that matter
  • Showroom fixtures secured and floors kept clear of cords

Products and completed work

High
A pinched cord, loose socket or overheating driver starts a fire, heavy fixtures fall, and failed emergency lights leave occupants in the dark.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Imported sockets, cord sets or LED drivers with doubtful certification marks
  • Integrated LED fixtures whose drivers run hot in enclosed housings
  • Heavy chandeliers and high-bay fixtures sold without rated mounting hardware
Controls that matter
  • Independent safety listing for each model, not just its components
  • Dielectric, polarity and grounding test on every unit off the line
  • Wattage limits, mounting instructions and lot codes on each product

Workers’ injury

Elevated
Power presses, metal spinning, polishing wheels and repetitive wiring cause amputations, eye injuries and strains.

Injuries and illness to employees.

Watch for
  • Presses fed by hand without two-hand controls or light curtains
  • Polishing lathes pulling work and gloves into the wheel
Controls that matter
  • Point-of-operation guarding checked daily on every press
  • Eye protection and dust hoods at polishing stations
  • Rotation and fixtures for repetitive wiring tasks

Commercial auto

Moderate
Sales staff call on showrooms and designers; a van may deliver locally, with most freight by carrier.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Own trucks delivering to retailers or installing in homes
Controls that matter
  • Driving records checked for delivery and sales staff, with fragile loads strapped

Crime and theft

Moderate
Brass, copper wire and boxed lamps are saleable, but values are ordinary.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Brass and copper scrap stored in open bins
Controls that matter
  • Scrap sales documented and stock counted against production

Inland marine and equipment

Moderate
Fragile glass and crystal fixtures ship to retailers, and sample lines go to trade shows and showrooms.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • High-end crystal chandeliers shipped assembled
  • Samples on long-term loan to showrooms with no agreement
Controls that matter
  • Tested packaging and declared-value shipment for high-end pieces
  • Consignment agreements stating who insures samples

Environmental

Elevated
Plating and antiquing baths, lacquers, thinners, metal cleaners and polishing sludge generate hazardous waste in a light-industrial setting.

Pollution on or from the site or the work.

Watch for
  • In-house plating or chemical antiquing with drains nearby
  • Solvent rags and lacquer waste in open containers
Controls that matter
  • Finishing wastes segregated and collected by a licensed hauler
  • Plating outsourced or run with sealed containment

Cyber and data

Moderate
Production is mostly manual and orders run through ordinary systems, though smart fixtures and lighting controls add connected products.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Smart bulbs, sensors or control apps sold under the insured's brand
  • Own web store taking card payments
Controls that matter
  • Security testing and update support for connected products
  • Hosted, tokenized checkout for online sales

Professional liability

Moderate
Commercial makers prepare lighting layouts for architects and contractors, and a wrong layout leaves dark areas or code shortfalls to fix.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Free lighting layouts or energy savings estimates supplied with bids
  • Custom fixtures built to the insured's own engineering
Controls that matter
  • Layouts issued with stated assumptions and the customer's sign-off
  • Engineering review of custom mounting and electrical designs

Umbrella and excess

Elevated
A fatal house fire traced to a lamp, or a fixture falling in a crowded building, can exhaust primary products limits.

How likely one liability event is to exhaust primary limits.

Watch for
  • Large volumes of one model sold through mass retailers
  • Heavy fixtures for arenas, hotels, schools or other crowded spaces
Controls that matter
  • Supplier indemnities and insurance for imported components and finished lamps
  • Lot coding that lets a recall target only affected units
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Single-story steel or masonry plants, often older buildings with additions, combining metalworking, finishing rooms and assembly under one roof with high-piled cartons.
Occupancy
Metal stamping and spinning, buffing, lacquer and powder coating, shade making with fabric and adhesives, and boxed finished stock in foam and cardboard packaging.
Protection
Sprinklers designed for carton and plastics storage, sprinklered spray booths, separate dust collection for buffing, solvents in approved cabinets and monitored fire alarms.
Exposure
Industrial parks with shared walls or close neighbors; pallets, packaging and scrap metal stored against outside walls can carry a fire into the building.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: products and sourcing

On site: processes and protection

On site: people and machines

On site: records and history

Refer or decline if you find

  • Imported lamps resold under own brand with no independent safety listing
  • No electrical test on finished units
  • Lacquer spraying in the open shop
  • Counterfeit or unverifiable certification marks on components
05 / Location

How UrbanStat data helps.

Stock is fragile, boxed in cardboard and often stored at floor level, so shallow flooding or a roof leak after wind or hail writes off far more than it wets.

FloodWindHailTornado
  • Flood scores at the address show whether floor-stored cartons of glass and fabric fixtures would be reached by shallow water.
  • Wind and hail scores for the site inform roof terms where a leak over boxed, fragile stock spoils whole pallets.
  • Parcel and permit data give the construction date and permit history, a check on roof age and on finishing or electrical upgrades.
Flood · Wind · Hail · Tornado
06 / Public loss data

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

2.1 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Electric lighting equipment manufacturing
2.1
All private industry
2.3

0.5 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Electric lighting equipment manufacturing (NAICS 3351), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

5 fatal work injuries in 2024.

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Electrical Equipment, Appliance, and Component Manufacturing (NAICS 335), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

103 citations from 22 inspections; 50% were classed serious, willful or repeat.

  • 1910.178 Powered industrial trucks
    7
  • 1910.1200 Hazard communication
    5
  • 1910.303 General (electrical)
    4
  • 1910.157 Portable fire extinguishers
    2
  • 1910.305 Wiring methods, components, and equipment for general use
    2

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Electric Lighting Equipment Manufacturing (NAICS 3351), the closest published group. Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

1 facilities reported toxic chemical releases totaling 14 pounds on and off site.

  • Copper
    14

Chemicals released in the largest amounts, in pounds.

United States, 2024. Industry: Residential Electric Lighting Fixture Manufacturing (NAICS 335131). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Product recall
One faulty socket, cord set or driver can force a recall across every model and retailer that used it.
Equipment breakdown
Power presses, spinning lathes and powder coating ovens fail without fire and stop production of key lines.
Ocean cargo
Imported sockets, drivers and complete fixtures travel by sea for weeks, often at the importer's risk.
Classification
SystemCodeIndustry
NAICS 2022, primary335131Residential Electric Lighting Fixture Manufacturing
NAICS 2022335132Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing
SIC 1987, primary3645Residential Electric Lighting Fixtures
SIC 19873646Commercial, Industrial, and Institutional Electric Lighting Fixtures
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →