Electric and acoustic guitar manufacturersNAICS 339992 · SIC 3931

Guitar makers saw, carve, glue and sand seasoned tonewoods into bodies and necks, spray them with lacquer, then fit hardware and electronics. Fine wood dust and flammable finishes share a building with years of irreplaceable timber and racks of finished instruments.

NAICS 339992 Musical Instrument ManufacturingSIC 3931 Musical Instruments

Manufacturing · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Fires starting in dust collection, spray finishing or lacquer storage

  2. 02

    Hand and finger injuries at saws, routers and sanders, plus solvent and dust exposure

  3. 03

    Theft or transit damage to finished instruments and scarce tonewood

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: Moderate, 2 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Low, 1 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Elevated, 3 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Moderate, 2 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • CNC carving and laser cutting replace hand work in most plants, raising output and machine values while concentrating production in fewer costly machines.
  • Shifting trade controls on rosewood, ebony and other protected species keep wood paperwork a condition of import and export, and a cause of seized shipments.
  • Direct online sales and custom configurators shift volume toward parcel shipping of single high-value instruments, raising transit damage and deposit fraud.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

High
Sanding dust, nitrocellulose lacquer overspray and solvent-soaked rags give a fire several easy starts among dry timber.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Spray booths with heavy lacquer residue on filters, walls and ducts
  • Dust collectors indoors without spark detection or explosion venting
  • Buffing lint and sanding dust built up on beams and light fittings
Controls that matter
  • Sprinklers throughout, including spray booths, ducts and the wood store
  • Lacquers and thinners in a cut-off room, a day's supply at the booth
  • Oily and solvent rags in self-closing cans emptied every shift

Business interruption

Elevated
Tonewood seasoned for years and programmed carving machines cannot be replaced quickly, and order books run months ahead.

How long and how costly a shutdown is.

Watch for
  • All seasoned wood stock and work in progress in one fire area
  • Single CNC router or finishing line with no backup
Controls that matter
  • Wood stock split between separate buildings or fire compartments
  • Machine programs, jigs and templates duplicated off site

Premises liability

Moderate
Few visitors beyond factory tours and a showroom, where guests walk past machinery and finishing areas.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Public tours through production during working hours
  • Build-your-own workshops or classes using shop machines
Controls that matter
  • Marked tour routes behind barriers, with eye and hearing protection issued
  • Signed waivers and close supervision for any hands-on courses

Products and completed work

Moderate
Instruments rarely injure anyone; realistic claims involve wiring faults in electric models and imported amplifiers sold under the maker's name.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Amplifiers, power supplies or effects units imported and sold under own brand
  • Onboard preamps with lithium cells or rechargeable packs
Controls that matter
  • Electrical products tested and certified for each market before sale
  • Serial numbers tied to build records for every instrument

Workers’ injury

Elevated
Table saws, band saws, routers and spindle sanders take fingers, and staff breathe hardwood dust and lacquer solvents daily.

Injuries and illness to employees.

Watch for
  • Exotic hardwood dusts that sensitize skin and lungs
  • Hand sanding and fretwork done for hours without rotation
  • Spray finishers without supplied-air or fitted respirators
Controls that matter
  • Guards, push blocks and flesh-sensing saws where the cut allows
  • Dust extraction at every machine and downdraft sanding tables
  • Respirator fit testing and hearing checks for exposed staff

Commercial auto

Low
Few vehicles; instruments go out by parcel carrier and staff drive mainly to trade shows.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Company vans carrying instruments to shows or artists
Controls that matter
  • Driver record checks for anyone using a company or rented vehicle

Crime and theft

Elevated
Finished guitars are valuable, portable and easy to sell, and premium models attract targeted break-ins and employee theft.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Finished-goods room without separate locking or cameras
  • Hardware, pickups and necks unaccounted for between counts
Controls that matter
  • Serial numbers logged at each stage, with regular reconciliation
  • Monitored alarm and access control on finished goods and shipping

Inland marine and equipment

Elevated
Instruments travel constantly to dealers, trade shows and artists on loan, and they damage easily in transit.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Artist loan instruments out with no written agreement or return date
  • High-value custom builds shipped under a carrier's standard liability
Controls that matter
  • Molded cases, humidity packs and declared-value shipping
  • Loan register with agreed values and signed terms

Environmental

Elevated
Lacquers, thinners, stains and spray booth waste make the plant a small solvent user with air emissions and hazardous waste.

Pollution on or from the site or the work.

Watch for
  • Waste lacquer and gun-cleaning solvent stored in open or unlabeled drums
  • Booth filters and overspray sludge put in general trash
Controls that matter
  • Licensed waste hauler with manifests kept on file
  • Contained drum storage and a move to water-based or UV-cured finishes

Cyber and data

Moderate
Carving programs, custom-order configurators and dealer ordering run on the network; ransomware halts carving and shipping for days.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • A direct-to-consumer web store taking custom orders and deposits
  • Machine programs held only on the CNC controllers
Controls that matter
  • Offline backups of machine programs, build records and order files
  • Hosted payment pages so card data never reaches company servers

Professional liability

Low
No advice is sold; repair and setup work on customers' instruments is a care and custody matter, not professional liability.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Restoration or appraisal of vintage instruments for owners or dealers
Controls that matter
  • Written repair and appraisal terms with agreed values before work begins

Umbrella and excess

Moderate
Liability claims are rare and small; an electrical fault in an amplifier sold under the brand is the realistic severe case.

How likely one liability event is to exhaust primary limits.

Watch for
  • Amplifiers and power supplies sourced overseas and sold under the brand
Controls that matter
  • Market certification and supplier indemnities for all powered products
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Single-story timber, masonry or steel shops and small plants, often older buildings converted from other uses, with climate-controlled wood rooms and attached spray booths.
Occupancy
Sawing, carving and sanding of dry hardwoods, nitrocellulose and polyurethane spraying, buffing, gluing and electronics assembly, with years of tonewood and finished guitars on racks.
Protection
Sprinklers throughout including booths and ducts, dust collection outside with spark detection, cut-off lacquer storage, humidity control with backup power, and a monitored alarm.
Exposure
Small makers often share older industrial or mixed-use buildings, where a neighbor's fire, smoke or water damage ruins seasoned wood and finished instruments.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: process and materials

On site: fire protection

On site: people and machines

On site: stock, shipping and records

Refer or decline if you find

  • Spraying nitrocellulose lacquer outside a proper booth
  • Unsprinklered wood-frame building holding the entire tonewood stock
  • Indoor dust collector with no spark detection or explosion relief
  • No paperwork for restricted or protected wood species
05 / Location

How UrbanStat data helps.

Seasoned timber and finished instruments are ruined by water or by a few days of uncontrolled humidity after roof damage or power loss. Finished stock makes the neighborhood burglary picture relevant.

FloodWindCrime
  • Flood scores at the address show whether ground-level wood stores and finished-goods rooms sit in water's path, where a shallow flood writes off years of seasoned timber.
  • Crime scores at the property level help set security conditions for a building full of serial-numbered, easily resold instruments.
  • Parcel and permit data give building age, value and permit history, a check on whether spray booths and dust systems were added with permits.
Flood · Wind · Crime
06 / Public loss data · NAICS 339992

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

2.4 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Musical instrument manufacturing
2.4
All private industry
2.3

1.2 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Musical instrument manufacturing (NAICS 339992). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

1 fatal work injury in 2024.

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: All Other Miscellaneous Manufacturing (NAICS 33999), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

19 citations from 6 inspections; 74% were classed serious, willful or repeat.

  • 1910.134 Respiratory protection
    1
  • 1910.1200 Hazard communication
    1
  • 1910.95 Occupational noise exposure
    1
  • 1910.37 Maintenance, safeguards, and operational features for exit routes
    1
  • 1910.215 Abrasive wheel machinery
    1

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Musical Instrument Manufacturing (NAICS 339992). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

10 facilities reported toxic chemical releases totaling 2,708 pounds on and off site.

  • Copper
    2,180
  • Copper and copper compounds
    489
  • Lead
    35

Chemicals released in the largest amounts, in pounds. 5 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Musical Instrument Manufacturing (NAICS 339992). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Equipment breakdown
CNC routers, dust collectors and humidity control fail without any fire, and lost humidity control cracks stored wood.
Finished stock at selling price
Finished instruments carry a large margin, so cost-based valuation leaves the maker short after a loss.
Intellectual property defense
Headstock shapes, body outlines and model names prompt trademark and trade dress disputes among guitar makers.

NAICS and SIC codes for electric and acoustic guitar manufacturers

SystemCodeIndustry
NAICS 2022, primary339992Musical Instrument Manufacturing
SIC 1987, primary3931Musical Instruments
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →