Wood furniture manufacturersNAICS 337122 · SIC 2511
Furniture factories dry, machine, sand, assemble, finish and often upholster wood furniture for homes, offices, schools and restaurants, some adding steel office lines, then ship to retailers, dealers and online buyers. Dust in ducts and silos, flammable finishes and foam fill large open buildings, and total fire losses are a long-standing pattern.
NAICS 337122 Nonupholstered Wood Household Furniture ManufacturingSIC 2511 Wood Household Furniture, Except UpholsteredNAICS 337121 Upholstered Household Furniture ManufacturingNAICS 337211 Wood Office Furniture Manufacturing+5 more codes
Where losses come from.
- 01
Dust explosions and fires spreading through collection ducts, silos and finishing lines
- 02
Machine, lifting and repetitive motion injuries on production lines
- 03
Dressers and shelving tipping onto children, and seats or beds collapsing
- PropertyProperty: Severe, 5 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Elevated, 3 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
- Mandatory stability rules for clothing storage furniture are tightening, raising testing costs and recall exposure for tall chests and dressers already in homes.
- Ready-to-assemble and online direct sales shift assembly to the buyer, so missing anchors and badly assembled joints become product claims.
- Power recliners, lift chairs and beds with motors and charging ports add electrical fire and crush injury exposure, including children caught under reclining mechanisms.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
SevereFine dust, solvent finishing lines, foam and fabric, dry kilns and wood-waste boilers fill large undivided buildings with continuous fuel.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Dust collectors, silos or ducts lacking spark detection and explosion venting
- Flat-line or spray finishing with solvent lacquers and heated ovens
- Polyurethane foam stored in bulk near production
- Sprinklers throughout, including ducts, booths, ovens and foam storage
- Spark detection, abort gates and explosion vents on dust systems
- Fire walls dividing machining, finishing, upholstery and warehouse
Business interruption
HighA fire seldom stays small, rebuilding takes a year or more, and retailers replace a missing supplier within a season.
How long and how costly a shutdown is.
- One finishing line or kiln that every product passes through
- Key retail or contract customers with delivery penalties
- Fire separation that limits any single loss to one department
- Outsourcing options agreed for finishing and upholstery
Premises liability
LowProduction sites see few outsiders unless a factory outlet or showroom shares the premises.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Factory outlet inside or beside the plant
- Showroom separated from production with its own entrance
Products and completed work
ElevatedChests and bookcases tip when climbed, chairs and bed frames collapse, and upholstered pieces burn fast in a house fire.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Tall storage furniture sold without anchors or stability testing
- Imported components or finished pieces sold under the insured's brand
- Composite panels with unverified formaldehyde emissions
- Stability and strength testing of each design, with anti-tip kits included
- Flammability-tested foam and fabrics for upholstered lines
- Lot marking and retailer records to support recalls
Workers’ injury
HighSaws, molders, routers and presses cause amputations, while sanding dust, finishing vapors, heavy lifting and repetitive upholstery work add steady claims.
Injuries and illness to employees.
- Guards removed or bypassed to speed changeovers
- Manual handling of panels and finished pieces between stations
- Spray operators working without supplied air or fit-tested respirators
- Interlocked guards on molders and saws, with lockout enforced at every changeover
- Conveyors, lift tables and vacuum lifters for handling
- Booth ventilation checks and air sampling for solvents and dust
Commercial auto
ElevatedMany factories run their own trucks to retailers and distribution centers, and some deliver into customers' homes.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Home delivery crews carrying furniture up stairs
- Long-distance runs with tight retail delivery windows
- Driver qualification files, hours monitoring and telematics
- Two-person crews trained in handling for home deliveries
Crime and theft
LowFurniture is bulky and hard to resell; theft is limited to tools, hardware and the odd truckload.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Loaded trailers parked in an unfenced yard
- Fenced yard and seal checks on outbound trailers
Inland marine and equipment
ModerateFinished pieces are damaged by handling, moisture and load shift on the way to retailers.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Online orders shipped singly through parcel networks
- Packaging drop-tested for parcel shipment and loads blanket-wrapped
Environmental
ElevatedFinishing lines emit solvent vapor, and stains, adhesives, glue wash water and boiler ash need managed disposal.
Pollution on or from the site or the work.
- Solvent finishing with emissions near permit limits
- Drums of waste finish stored outdoors on bare ground
- Waterborne or cured finishes and solvent recovery
- Contained, covered hazardous waste storage with licensed removal
Cyber and data
ElevatedCNC machining centers, finishing lines and order systems are networked, and direct online sales hold customer payment and delivery details.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Machine programs and planning systems on the same network as office email
- Consumer web store and delivery scheduling run in-house
- Segmented plant network with offline backups of programs and cut lists
- Hosted, tokenized checkout and multi-factor login for remote access
Professional liability
LowDesign faults are products claims; only space planning for office and contract buyers adds a small advice exposure.
Loss or injury caused by advice, design, testing, care or another professional service.
- Office or hospitality layouts designed by the maker's own staff
- Layout drawings approved in writing by the buyer or their designer
Umbrella and excess
HighA dresser tip-over killing a child, collapsing school or stadium seating, or a delivery truck crash can exhaust primary limits.
How likely one liability event is to exhaust primary limits.
- Tall chests and bookcases sold in large volumes through mass retail
- Bleachers, theater or stadium seating among institutional lines
- Stability testing beyond the minimum, with anchors in every carton
- Load testing and written installation instructions for fixed seating
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Large single-story plants, often wood or unprotected steel frame and extended many times, with long undivided roofs over machining, finishing, upholstery and warehouse areas.
- Occupancy
- Rough mill, machining and sanding generate fine dust; spray or flat-line finishing uses solvent coatings and ovens; upholstery adds foam and fabric; steel lines add welding and powder coating.
- Protection
- Full sprinklers including ducts, booths and foam storage, spark detection and explosion venting on dust systems, fire walls between departments and a trained plant emergency team.
- Exposure
- Lumber yards, wood waste silos, boilers and kilns stand beside the main building, and rural sites often rely on limited water and distant fire departments.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: products and testing
On site: dust and finishing
On site: building and continuity
On site: people, fleet and records
Refer or decline if you find
- Dust collection with no spark detection or explosion venting
- Visible dust layers on roof structure and equipment
- Solvent finishing line in an unsprinklered building
- Tall storage furniture sold without stability testing or anchors
- No fire division between production and warehouse
How UrbanStat data helps.
Factories often stand in forested or rural areas with limited public water and distant fire departments. Lumber yards and waste piles are exposed to wildfire embers, and wide roofs over combustible contents to wind damage.
- Wildfire scores at the address show whether lumber yards, waste piles and a combustible plant face ember exposure from nearby forest.
- Street-by-street exposure views show insured value accumulating across a furniture plant and neighboring wood businesses, with alerts when a set threshold is passed.
- Parcel and permit data give the construction date, building value and permit history, a check on plant additions and fire protection upgrades.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
3.2 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.
1.0 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Nonupholstered wood household furniture manufacturing (NAICS 337122). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
1 fatal work injury in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Household and Institutional Furniture Manufacturing (NAICS 33712), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
166 citations from 28 inspections; 67% were classed serious, willful or repeat.
- 1910.213 Woodworking machinery requirements27
- 1910.219 Mechanical power-transmission apparatus12
- 1910.147 The control of hazardous energy (lockout/tagout)11
- 1910.178 Powered industrial trucks10
- 1910.305 Wiring methods, components, and equipment for general use9
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Nonupholstered Wood Household Furniture Manufacturing (NAICS 337122). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
10 facilities reported toxic chemical releases totaling 59,326 pounds on and off site.
- N-butyl alcohol25,728
- Xylene20,377
- Toluene8,426
Chemicals released in the largest amounts, in pounds. 7 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Nonupholstered Wood Household Furniture Manufacturing (NAICS 337122). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Product recall
- A tip-over or collapse defect in a popular model means notifying buyers, shipping anchor kits and taking back stock.
- Equipment breakdown
- Molders, CNC centers, finishing line ovens and boilers fail without fire and stop the whole plant.
- Contingent business interruption
- Foam, panels and hardware often come from one or two suppliers whose loss halts assembly within weeks.
- Employment practices
- Large production workforces with piece rates, shift work and seasonal layoffs bring wage and discrimination claims.
NAICS and SIC codes for wood furniture manufacturers
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 337122 | Nonupholstered Wood Household Furniture Manufacturing |
| NAICS 2022 | 337121 | Upholstered Household Furniture Manufacturing |
| NAICS 2022 | 337211 | Wood Office Furniture Manufacturing |
| NAICS 2022 | 337127 | Institutional Furniture Manufacturing |
| NAICS 2022 | 337214 | Office Furniture (except Wood) Manufacturing |
| SIC 1987, primary | 2511 | Wood Household Furniture, Except Upholstered |
| SIC 1987 | 2512 | Wood Household Furniture, Upholstered |
| SIC 1987 | 2521 | Wood Office Furniture |
| SIC 1987 | 2531 | Public Building and Related Furniture |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.