Furniture refinishing and repair shopsNAICS 811420 · SIC 7641

Furniture refinishers strip old coatings with solvents or caustic, repair the wood, then stain and spray new lacquer or varnish. Flammable liquids, finish-soaked rags, overspray and wood dust share a small workshop that also holds customers' furniture, some of it irreplaceable.

NAICS 811420 Reupholstery and Furniture RepairSIC 7641 Reupholstery and Furniture Repair

Other Services (except Public Administration) · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Fires from spraying flammable finishes and from oily rags that self-heat

  2. 02

    Loss of customers' furniture and antiques in a shop fire or in transit

  3. 03

    Worker illness from stripper vapors, isocyanates and wood dust

How it comparesEach line’s rating against the average for its NAICS sector, Other Services (except Public Administration) (40 business types), and for all 747.
  1. PropertyProperty: High, 4 of 5; sector average 2.5; all business types 2.9.
  2. Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
  3. Premises liabilityPremises liability: Moderate, 2 of 5; sector average 2.9; all business types 2.7.
  4. Products and completed workProducts and completed work: Moderate, 2 of 5; sector average 2.5; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 2.5; all business types 3.0.
  6. Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.1; all business types 2.5.
  7. Crime and theftCrime and theft: Low, 1 of 5; sector average 2.1; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.1; all business types 2.6.
  9. EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 1.8; all business types 2.3.
  10. Cyber and dataCyber and data: Low, 1 of 5; sector average 2.2; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 2.2; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Moderate, 2 of 5; sector average 3.1; all business types 3.6.
What’s changing
  • Methylene chloride strippers are being phased out, and the replacements work more slowly and bring their own fire and health hazards.
  • Waterborne and catalyzed coatings replace many nitrocellulose lacquers, cutting the fire load but adding isocyanate exposure for sprayers.
  • Online resale of vintage and mid-century furniture brings pieces shipped in from distant owners, raising transit and agreed-value questions.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

High
Lacquers, thinners and strippers are used in the open beside sanding dust, drying furniture and woodworking machines.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Spraying in a homemade booth or the open shop
  • Rags with linseed or stain oils left in heaps
  • Overspray residue built up on booth walls, fans and filters
Controls that matter
  • Listed spray booth with explosion-rated electrics and its own sprinklers
  • Self-closing metal cans for rags, emptied daily
  • Flammable liquids limited to a day's supply outside approved cabinets

Business interruption

Moderate
Small shops with ordinary tools can restart elsewhere, though the spray booth takes time to replace.

How long and how costly a shutdown is.

Watch for
  • Contract work for hotels or offices with completion deadlines
  • One craftsman holding the specialist skills
Controls that matter
  • Arrangement to rent booth time at another shop
  • Job records and customer details backed up off site

Premises liability

Moderate
Few customers enter the workshop; the exposure is deliveries and touch-up work in clients' homes and offices.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • On-site refinishing of floors, cabinets or paneling in occupied buildings
  • Showroom reached through the work area
Controls that matter
  • Ventilation and ignition control rules for on-site finishing
  • Customers kept out of stripping and spray rooms

Products and completed work

Moderate
A repaired chair or bed that gives way injures someone now and then; finishes on cribs or tableware raise toxicity questions.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Structural repairs to chairs, ladders, cribs or bunk beds
  • Old lead-painted items stripped and returned
Controls that matter
  • Glued joints clamped and fully cured before release
  • Child-safe finishes used on juvenile furniture

Workers’ injury

Elevated
Solvent and caustic strippers, lacquer vapors, wood dust and saws combine chemical and mechanical injury.

Injuries and illness to employees.

Watch for
  • Methylene chloride stripper still in use, worst in small unventilated rooms
  • Workers reaching into dip tanks
  • Sanding old finishes that contain lead
Controls that matter
  • Local exhaust at stripping and spray stations
  • Respirators matched to the chemicals, with fit tests
  • Guards and dust collection on all woodworking machines

Commercial auto

Moderate
A van or box truck collects and returns furniture locally, a few trips a day.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Employees lifting heavy pieces without a lift gate
  • Solvents carried in the cab for on-site work
Controls that matter
  • Driver record checks
  • Lift gate, straps and blankets in every vehicle

Crime and theft

Low
Little cash and nothing easy to resell, apart from the occasional valuable antique.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • High-value antiques held for long restoration jobs
Controls that matter
  • Monitored alarm and a record of valuable pieces on site

Inland marine and equipment

Elevated
Customers' furniture, pianos and antiques sit in the shop for weeks and travel in the shop's truck.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Museum, dealer or collector pieces accepted without agreed values
  • Furniture stored in the spray or stripping area
  • Long backlogs with pieces stacked in aisles
Controls that matter
  • Bailee cover on a stated or agreed value basis
  • Intake photographs and written condition reports
  • Finished pieces stored in a separate, cut-off room

Environmental

Elevated
Stripping tanks, spent solvents, finish sludge and rinse water are hazardous wastes generated on a small site.

Pollution on or from the site or the work.

Watch for
  • Rinse water from stripping flowing to floor drains or the yard
  • Drums of old stripper sludge accumulating outdoors
  • Long-established sites with past dumping
Controls that matter
  • Closed-loop rinse or licensed wastewater disposal
  • Waste drums on containment, collected with manifests
  • Solvent recovery still operated to its instructions

Cyber and data

Low
Customer contacts, photographs and invoices sit on a laptop or phone, and the work depends on no networked system.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Deposit requests sent by email, where payment details can be spoofed
Controls that matter
  • Hosted card terminal and call-back checks on any payment change

Professional liability

Moderate
Stripping or refinishing an antique can destroy much of its value, and owners blame the shop's advice.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Valuations or authenticity opinions given to customers
  • Conservation work on museum or collector pieces
Controls that matter
  • Written treatment plan approved by the owner before work starts
  • No valuations offered beyond the shop's real expertise

Umbrella and excess

Moderate
Liability losses are modest; the worst cases are a shop fire spreading to neighbors or a collapsed chair injuring someone.

How likely one liability event is to exhaust primary limits.

Watch for
  • Shop in a mixed-use building with residents above
  • Contract seating repaired for hotels or public venues
Controls that matter
  • Fire separation from neighbors and solvent stock kept low
  • Load checks on repaired seating before return
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Older light-industrial units, converted garages and barns, often wood-framed or ordinary masonry with wood roofs, sometimes sharing walls with other small trades.
Occupancy
Solvent and caustic stripping, lacquer and varnish spraying, sanding and woodworking, with finish-soaked rags, drying pieces and customers' furniture packed into the same space.
Protection
A listed spray booth with sprinklers and rated electrics, rag cans emptied daily, flammable liquid cabinets, dust collection, and monitored fire and intrusion alarms.
Exposure
Close neighbors in older industrial rows or on rural lots, shared walls that pass fire both ways, and floodable yards where waste drums can wash away.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: work performed

On site: finishing and fire control

On site: customers' goods

On site: people and waste

Refer or decline if you find

  • Spraying lacquer in the open shop with ordinary fans
  • Oily rags in open bins or cardboard boxes
  • Stripping rinse water discharged to the ground or storm drain
  • Antiques accepted with no values or condition records
  • Wood-frame building with no sprinklers and heavy solvent stock
05 / Location

How UrbanStat data helps.

Shops occupy older light-industrial or converted buildings, often wood-framed and close to neighbors. Customers' pieces cannot be replaced after a flood or wildfire, and drums of solvent waste on a flooded site become a pollution claim.

FloodWildfire
  • Parcel and permit data reveal the building's construction date and any spray booth or electrical permits, a check on a workshop in an old converted structure.
  • Flood scores at the address show whether customers' furniture and drums of stripping waste sit at risk of inundation.
  • Wildfire scores at the property level flag workshops on the wildland edge, where solvent stock and wooden goods make a building hard to defend.
Flood · Wildfire
06 / Public loss data · NAICS 811420

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

1.8 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.

Personal and household goods repair and maintenance
1.8
All private industry
2.3

1.1 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Personal and household goods repair and maintenance (NAICS 8114), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

13 fatal work injuries in 2024, most often from exposure to harmful substances or environments (3).

Other services
3.3
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Personal and Household Goods Repair and Maintenance (NAICS 8114), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

153 citations from 35 inspections; 54% were classed serious, willful or repeat.

  • 1910.1200 Hazard communication
    19
  • 1910.147 The control of hazardous energy (lockout/tagout)
    11
  • 1910.178 Powered industrial trucks
    10
  • 1910.28 Duty to have fall protection and falling object protection
    5
  • 1910.305 Wiring methods, components, and equipment for general use
    5

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Personal and Household Goods Repair and Maintenance (NAICS 8114), the closest published group. Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Bailee customers' goods
Customers' furniture sits in the shop for weeks and is often worth more than the shop's own contents.
Pollution legal liability
Stripper rinse water, spent solvents and sludge can contaminate soil and drains on small, older sites.
Fine arts for high-value pieces
Antiques and collector pieces need agreed values, and ordinary bailee limits rarely match what they are worth.
Equipment breakdown
Spray booth fans, compressors and dust collectors fail without any fire and stop finishing work.

NAICS and SIC codes for furniture refinishing and repair shops

SystemCodeIndustry
NAICS 2022, primary811420Reupholstery and Furniture Repair
SIC 1987, primary7641Reupholstery and Furniture Repair
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →