Cutlery and flatware manufacturersNAICS 332215 · SIC 3421

Cutlery manufacturers blank or forge steel into knives, scissors, razor and saw blades, edge tools and table flatware, then heat treat, grind, polish and fit handles. Every stage after hardening handles a sharp edge, grinding and buffing throw off dust and lint, and the finished goods are small, valuable and often sold direct online.

NAICS 332215 Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) ManufacturingSIC 3421 CutleryNAICS 332216 Saw Blade and Handtool ManufacturingNAICS 339910 Jewelry and Silverware Manufacturing+3 more codes

Manufacturing · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Lacerations, repetitive strain and dust exposure among grinders, polishers and assemblers

  2. 02

    Fires in buffing lint, dust collectors, quench oil and handle materials

  3. 03

    Knives that break, fold or slip in use, and theft of finished stock

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Elevated, 3 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Direct-to-consumer web sales have grown, adding card data, age checks and parcel theft to what used to be a wholesale business.
  • Powder steels, titanium handles and carbon fiber bring reactive dusts and new grinding hazards that older dust collectors were not built for.
  • Robotic grinding and CNC sharpening cut hand-grinding injuries but tie output to programs and networked machines that ransomware can stop.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Elevated
Buffing lint, polishing compound, quench oil and handle woods and plastics give a metal shop a real fire load.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Lint and compound build-up in buffing ducts and collectors
  • Titanium or aluminum grinding dust mixed with steel sparks
  • Open quench oil tanks or nitrate salt baths beside furnaces
Controls that matter
  • Ducts and collectors cleaned on a schedule, with spark detection where fitted
  • Separate collection for reactive metal dust
  • Quench tank covers, temperature limits and sprinklers overhead

Business interruption

Elevated
Forging dies, blanking tools and heat treatment are the pinch points, and sales peak before gift-giving holidays.

How long and how costly a shutdown is.

Watch for
  • Heat treating done on one furnace with no outside backup
  • Most revenue landing in a short pre-holiday season
Controls that matter
  • Approved outside heat treater and duplicate critical dies
  • Finished stock held at a separate fulfillment location

Premises liability

Low
Factory visitors are rare; a factory store or sharpening counter adds ordinary retail exposure.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Factory tours or knife-making classes for the public
Controls that matter
  • Escorted tours kept behind barriers, with sharp stock in closed displays

Products and completed work

Elevated
Users expect blades to cut; locks that release, tips that snap and handles that loosen cause deep hand injuries.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Folding knives with locking mechanisms and assisted opening
  • Imported components assembled and sold under the insured's brand
  • Online sales without age checks or shipping restrictions
Controls that matter
  • Lock strength, hardness and handle pull tests per production lot
  • Clear use and care warnings on packaging
  • Age verification and destination screening built into checkout

Workers’ injury

High
Hands are on sharp or spinning steel all shift: cuts, wheel bursts, vibration, repetitive motion and metal dust.

Injuries and illness to employees.

Watch for
  • Hand grinding and sharpening on piece-rate pay
  • Drop hammers and blanking presses with manual feeding
  • Chromium or nickel dust from dry polishing
Controls that matter
  • Cut-resistant gloves and sleeves suited to each task
  • Job rotation and fixtures that take the grip load off hands
  • Local exhaust at every wheel with guards and tool rests set

Commercial auto

Moderate
Occasional trade show trips and sales calls; shipping is by parcel carrier.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Sales staff carrying sample cases in personal cars
Controls that matter
  • Non-owned auto cover and driving record checks for sales staff

Crime and theft

Elevated
Finished knives are compact, branded and resell easily, and flatware plants hold silver for plating.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Collector-grade or limited-edition knives in open stock
  • Silver anodes and plating salts on site
  • Returns and seconds leaving through staff sales
Controls that matter
  • Caged finished goods with cycle counts by serial or batch
  • Safe storage and weight reconciliation for silver
  • Bag checks and controlled staff purchase scheme

Inland marine and equipment

Moderate
Parcels in transit, trade show displays and goods at outside platers or engravers.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • High-value shipments sent by parcel without declared value
  • Show stock left in vehicles overnight
Controls that matter
  • Signature-required shipping and transit limits per parcel
  • Show stock inventoried and locked in the venue

Environmental

Elevated
Plating, passivating and etching baths, grinding swarf and quench oils create regulated waste streams.

Pollution on or from the site or the work.

Watch for
  • In-house silver or chrome plating with cyanide solutions
  • Acid etching and passivation rinses to drain
  • Oily grinding sludge stored outdoors
Controls that matter
  • Waste treatment with licensed sludge disposal and discharge testing
  • Diked chemical and oil storage on sealed floors

Cyber and data

Elevated
Direct online sales hold buyers' card and address details, and ransomware on networked grinders, engravers and order systems stops shipping in peak season.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Own web store taking card payments on a self-managed platform
  • CNC grinders and laser engravers on the office network
Controls that matter
  • Hosted checkout so card numbers never touch the insured's servers
  • Production machines segmented from office systems, with offline backups

Professional liability

Low
Knives, tools and flatware are sold as products; design faults fall under products, and little advice is given.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Custom industrial blade design or sharpening programs sold to food plants
Controls that matter
  • Written specifications signed off by the customer for custom blades

Umbrella and excess

Elevated
Saw blades that shatter at speed and knife locks that fail cause disabling injuries, and a defect in a popular model multiplies claims.

How likely one liability event is to exhaust primary limits.

Watch for
  • Saw blades, chain saw chains or slicer blades sold for powered equipment
  • Pressure cookers or nonstick cookware made alongside the cutlery
Controls that matter
  • Limits sized to sales of locking knives and powered-tool blades
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Long-established makers often occupy multi-story brick mill buildings with timber floors; newer firms use single-story steel or masonry units with heat treating and grinding in one open shop.
Occupancy
Forging and furnace hardening with oil quench, wet and dry grinding, buffing that sheds cotton lint and compound, handle work in wood and plastics, and packing in cardboard.
Protection
Sprinklers throughout, spark detection on dust collectors, separate wet collection for titanium and aluminum dust, covered quench tanks, and a monitored intrusion alarm over finished stock.
Exposure
Mill complexes and industrial units share walls and roofs with other tenants, and dust collectors or lint bins set against outside walls can carry fire into the building.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: products and sales

On site: processes and fire protection

On site: people

On site: security

Refer or decline if you find

  • Thick lint deposits in buffing ducts and on roof trusses
  • Reactive metal dust sharing a collector with steel grinding
  • Locking knives sold with no lock strength testing
  • Finished knives stored in open racking with no stock control
  • Carbide-tipped saw blades sold with no braze or overspeed testing
05 / Location

How UrbanStat data helps.

Compact, branded stock makes local crime rates relevant to both burglary and parcel theft. Older multi-story mill buildings, common in this trade, bring flood-prone basements holding heat treatment and plating rooms.

CrimeFloodWindEarthquake
  • Crime scores at the address inform burglary terms for finished knives and plating silver, which are small, branded and easy to resell.
  • Parcel and permit data show the construction date and permit history of older mill-type buildings, a prompt to ask about wiring, sprinklers and dust collection upgrades.
  • Flood scores at the address show whether basement heat treating, plating and stock rooms sit in water's path.
Crime · Flood · Wind · Earthquake
06 / Public loss data · NAICS 332215

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

3.6 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Metal kitchen cookware, utensil, cutlery, and flatware (except precious) manufacturing
3.6
All private industry
2.3

0.5 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Metal kitchen cookware, utensil, cutlery, and flatware (except precious) manufacturing (NAICS 332215). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

46 fatal work injuries in 2024, most often from contact with objects and equipment (13).

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Fabricated Metal Product Manufacturing (NAICS 332), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

21 citations from 7 inspections; 67% were classed serious, willful or repeat.

  • 1910.217 Mechanical power presses
    5
  • 1910.147 The control of hazardous energy (lockout/tagout)
    4
  • 1910.212 General requirements for all machines
    2
  • 1910.1200 Hazard communication
    1
  • 1910.132 General requirements (personal protective equipment)
    1

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing (NAICS 332215). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

14 facilities reported toxic chemical releases totaling 59,348 pounds on and off site.

  • Aluminum oxide
    33,370
  • Chromium
    22,028
  • Ammonia
    2,007

Chemicals released in the largest amounts, in pounds. 8 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing (NAICS 332215). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Product recall
A lock or blade defect across a model forces retailers to pull stock and buyers to return knives.
Equipment breakdown
Hardening furnaces, CNC grinders and blanking presses fail mechanically or electrically, stopping output before the holiday peak.
Site pollution liability
Plating, passivating and grinding sludge can contaminate drains and soil, which general liability pollution exclusions leave uncovered.

NAICS and SIC codes for cutlery and flatware manufacturers

SystemCodeIndustry
NAICS 2022, primary332215Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing
NAICS 2022332216Saw Blade and Handtool Manufacturing
NAICS 2022339910Jewelry and Silverware Manufacturing
SIC 1987, primary3421Cutlery
SIC 19873914Silverware, Plated Ware, and Stainless Steel Ware
SIC 19873423Hand and Edge Tools, Except Machine Tools and Handsaws
SIC 19873425Saw Blades and Handsaws
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →