Firearm manufacturersNAICS 332994 · SIC 3484
Firearm manufacturers machine, heat treat, finish, assemble and test-fire handguns, rifles and shotguns, and often sell parts and accessories. A defect or a design that fires when dropped can kill, finished guns are a prime theft target, and test ranges leave lead behind.
NAICS 332994 Small Arms, Ordnance, and Ordnance Accessories ManufacturingSIC 3484 Small Arms
Where losses come from.
- 01
Product liability suits after accidental discharges, burst barrels and out-of-battery firing
- 02
Theft of finished firearms and serialized parts by outsiders or employees
- 03
Machining injuries, noise and lead exposure in production and test firing
- PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Severe, 5 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: High, 4 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: Severe, 5 of 5; sector average 3.6; all business types 3.6.
- Polymer frames, modular fire-control units and direct sales of parts put more safety-critical components in owners' hands, and home assembly blurs who built the gun.
- Litigation increasingly targets makers over marketing and distribution after criminal misuse, with larger jury awards and long, costly defense even where claims fail.
- Electronic acquisition and disposition records and automated serial marking improve traceability, but a lost or corrupted record set now halts shipping.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ElevatedMachining with oil coolants, heat treatment, hot bluing salts, stock finishing and stored propellant put several ignition sources under one roof.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Ammunition, powder or primers kept beyond what test firing needs
- Wood stock shaping and lacquer spraying in the main plant
- Titanium or magnesium machining with fines left on machines
- Sprinklers throughout, with cut-off rooms for finishing and heat treatment
- Ammunition and propellant in a dedicated magazine with quantity limits
- Mist collection on machining centers and daily swarf removal
Business interruption
ElevatedBarrel-making and multi-axis machining equipment is specialized, and a suspended manufacturing license stops shipments even when the plant is intact.
How long and how costly a shutdown is.
- Single rifling or hammer-forging machine feeding every product line
- Dependence on one outside heat treater, coater or forging supplier
- Qualified second sources for forgings, barrels and finishing
- Off-site copies of drawings, programs and serial number records
Premises liability
ModerateVisitors are few and controlled, but a test range and occasional demonstration shoots put live fire on the premises.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Customer or media shooting days on the insured's range
- Outdoor range with houses or roads behind the backstop
- Enclosed bullet trap range with restricted, logged access
- Range officer and written rules for any guest shooting
Products and completed work
SevereA firearm that discharges when dropped, fires out of battery or bursts causes death or permanent injury, and guns stay in use for generations.
Harm caused by what the business sells, serves, makes, installs or repairs.
- New designs released without independent drop and endurance testing
- Trigger, safety or fire-control parts bought from unvetted suppliers
- Past recalls, safety bulletins or open bodily injury suits
- Proof firing and function testing of every gun before shipment
- Documented design review and abuse testing for each model
- Serial-number traceability back to material lots and inspection records
Workers’ injury
ElevatedMachinists face cuts, caught-in injuries and coolant dermatitis, while test shooters and range cleaners take in lead and noise.
Injuries and illness to employees.
- Indoor range with poor airflow at the firing line
- Hand polishing and buffing with no dust capture
- Range ventilation pulling smoke away from shooters, with blood lead testing
- Hearing protection program with annual audiograms
- Interlocked guards on machining centers and presses
Commercial auto
ModerateSales staff drive to dealers and shows; finished guns usually move by common carrier rather than company trucks.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Employees carrying sample firearms in personal vehicles
- Own vans delivering to distributors
- Locked, unmarked containers for any firearms carried by road
- Driving record checks for sales and show staff
Crime and theft
HighFinished firearms, frames and receivers are compact, hard to trace once stolen and worth more on the street than at the factory gate.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Serialized parts unaccounted for between machining and assembly
- Scrapped or rejected frames leaving in ordinary waste
- No background screening for production and shipping staff
- Vault storage with dual access for finished guns and serialized parts
- Daily reconciliation of serial numbers from marking through shipping
- Monitored alarm, cameras and screening at employee exits
Inland marine and equipment
ElevatedCartons of firearms in carriers' hands attract theft, and customers' guns come back for warranty and custom work.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Shipments in boxes that identify the contents or the maker
- Display guns taken to trade shows and dealer events
- Plain packaging, adult signature and tracked shipment for every consignment
- Customers' firearms logged in, stored in the vault and logged out
Environmental
ElevatedLead from test firing, spent bluing and phosphating baths, plating rinses, degreasing solvents and oily swarf all need controlled disposal.
Pollution on or from the site or the work.
- Outdoor range with lead building up in soil berms
- Finishing baths discharged to drains without treatment
- Bullet traps emptied and lead recycled by a licensed handler
- Finishing wastes collected in contained areas and hauled under manifest
Cyber and data
ElevatedSerial number and disposition records must stay complete and retrievable, and direct sales and warranty registrations hold buyer details that attract hostile attention.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Serial records kept in one system with no offline copy
- Online sales of parts and accessories with stored customer data
- Design files and machine programs shared with outside suppliers
- Offline, tested backups of acquisition and disposition records
- Multi-factor sign-in for remote access and the web store
- Design data shared only through controlled, logged transfers
Professional liability
LowDesign and testing errors surface as product claims; a separate exposure exists only where training or consulting is sold.
Loss or injury caused by advice, design, testing, care or another professional service.
- Armorer courses, firearms training or consulting sold to agencies
- Written terms and qualified instructors for any training sold
Umbrella and excess
SevereA defect can kill or maim, suits often name the maker after misuse, and a design flaw repeats in every gun of that model.
How likely one liability event is to exhaust primary limits.
- Large volumes of one model with a known drop or trigger complaint
- Suits alleging negligent marketing or distribution after criminal misuse
- Layered limits sized to the number of guns in circulation
- Complaint tracking by model that feeds back into design review
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Single-story steel or masonry plants with machining bays, separate finishing and heat treatment rooms, a vault for finished goods, and often an indoor or outdoor test range.
- Occupancy
- Oil-coolant machining, hot salt bluing and phosphating, wood stock finishing, heat treatment, propellant and ammunition for test firing, and racks of serialized parts.
- Protection
- Sprinklers throughout with cut-off finishing rooms, a separate powder magazine, monitored intrusion alarm, cameras, vault storage for finished guns and access control at every entrance.
- Exposure
- Plants in rural or edge-of-town areas face slower police response, and outdoor ranges need a safe backstop with roads, houses and livestock kept well beyond it.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: products and design
On site: plant and processes
On site: security
On site: records and history
Refer or decline if you find
- Serialized frames or receivers missing with no documented investigation
- New models sold without drop testing
- Open injury suits alleging unintended discharge
- Finished guns stored on open racks outside a vault
- Outdoor test firing toward an unprotected boundary
How UrbanStat data helps.
Neighborhood crime and distance from police response shape burglary risk for a building full of finished guns. Flood ruins precision machines and corrodes steel stock within hours. Wind or tornado damage that opens the building leaves finished guns unsecured.
- Crime scores at the address inform vault, alarm and guard requirements for a plant whose finished stock is a known burglary target.
- Flood scores for the site show whether machining centers, steel stock and finished firearms sit at a level where water would reach them.
- Underwriting rules drawn on the map can hold new firearm plant submissions in high-crime areas for referral before a quote is released.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
1.9 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.
0.6 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Small arms, ordnance, and ordnance accessories manufacturing (NAICS 332994). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
6 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Other Fabricated Metal Product Manufacturing (NAICS 3329), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
61 citations from 14 inspections; 48% were classed serious, willful or repeat.
- 1910.1200 Hazard communication10
- 1910.134 Respiratory protection9
- 1910.303 General (electrical)6
- 1910.95 Occupational noise exposure4
- 1910.305 Wiring methods, components, and equipment for general use4
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Small Arms, Ordnance, and Ordnance Accessories Manufacturing (NAICS 332994). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
32 facilities reported toxic chemical releases totaling 116,080 pounds on and off site.
- Lead47,163
- Nitrate compounds15,949
- Chromium9,678
Chemicals released in the largest amounts, in pounds. 23 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Small Arms, Ordnance, and Ordnance Accessories Manufacturing (NAICS 332994). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Product recall
- A safety defect means retrieving or retrofitting every gun of that model from dealers and owners.
- Equipment breakdown
- Hammer forging machines, multi-axis machining centers and heat treat furnaces fail without fire and are slow to replace.
- Employment practices
- Shift work, background screening and security searches at exits bring discrimination and privacy claims.
- Directors and officers
- Regulatory actions, investigations and public litigation over marketing can name the company's leaders personally.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.