Condom manufacturers

Condom manufacturers compound natural rubber latex or synthetic polymers, dip glass formers on continuous lines, cure, leach and electronically test every piece, then lubricate and seal it in foil. The product is a regulated medical device, so pinholes, breakage and labeling errors lead to recalls and injury claims.

Manufacturing · NAICS 326299 · SIC 3069 · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Product failure through breakage, pinholes or degraded latex, alleged to cause pregnancy or infection

  2. 02

    Batch recalls after failed burst, leak or shelf-life testing

  3. 03

    Long outages when a dipping line or the latex supply is lost

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Low, 1 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Synthetic polyisoprene and polyurethane products are growing for latex-allergic users, bringing solvent handling and new failure modes into plants built for latex.
  • Subscriptions and online marketplaces sell more product direct, raising counterfeit, privacy and storage condition questions that sit outside the maker's control.
  • Hotter summers and longer supply chains put more finished stock at risk of degrading before sale, which makes stability data and shipping controls matter more.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Elevated
Dipping is a wet process, but gas-fired curing ovens, dried latex build-up, solvent for synthetic lines and foil and carton stock burn.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Solvent-based dipping of synthetic polyisoprene or polyurethane
  • Latex and lint deposits inside ovens and exhaust ducts
  • Finished goods and packaging stored beside the dipping hall
Controls that matter
  • Oven burner safeguards and scheduled duct cleaning
  • Sprinklers throughout, with solvent areas cut off and ventilated
  • Climate-controlled finished goods store in a separate fire area

Business interruption

High
Dipping lines are custom-built and registered to the product, so replacement and regulatory re-approval take many months.

How long and how costly a shutdown is.

Watch for
  • One or two dipping lines producing all output
  • Public health program contracts with fixed delivery dates and penalties
  • Latex concentrate from a single plantation region
Controls that matter
  • Second plant or approved contract dipper able to supply
  • Latex and finished goods buffer stock held off site

Premises liability

Low
Clean, access-controlled plants receive almost no visitors and do no work off site.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Ammonia from latex storage noticeable beyond the boundary
Controls that matter
  • Sealed latex tanks with vent scrubbing

Products and completed work

High
A failed unit means an unplanned pregnancy or infection claim, latex proteins trigger allergy, and one bad batch spans millions of units.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Spermicide, desensitizing or warming lubricants added to the product
  • Private-label supply where the brand owner controls claims and storage
  • Export to hot climates without stability data
Controls that matter
  • Electronic pinhole testing of every unit plus batch burst testing
  • Stability studies supporting the printed expiry date
  • Lot traceability to latex batch, line and shift

Workers’ injury

Elevated
Operators mount each condom on test mandrels by hand at speed, around ammonia vapor, latex proteins, hot ovens and wet floors.

Injuries and illness to employees.

Watch for
  • High-rate manual testing and stripping stations
  • Compounding with accelerator powders and ammonia without extraction
Controls that matter
  • Job rotation and automated testing where practical
  • Local exhaust in compounding and powder-free handling
  • Latex allergy screening and non-slip flooring around dip tanks

Commercial auto

Low
Product leaves by contract carrier and staff seldom drive on business.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Sales staff using personal cars for customer visits
Controls that matter
  • Non-owned auto cover for occasional business use

Crime and theft

Moderate
Branded finished goods are compact and resold easily, and rejected product must not reach the market.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Reject and expired stock leaving the site intact
Controls that matter
  • Witnessed destruction of rejects and secured finished goods cage

Inland marine and equipment

Moderate
Export containers spend weeks at sea and in ports, where heat shortens latex life before the product is sold.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Shipments through tropical ports without temperature monitoring
Controls that matter
  • Temperature loggers in containers and insulated or refrigerated shipping

Environmental

Moderate
Leach and wash water carries latex solids, zinc and ammonia, treatable on site; solvent lines add recovery and emission duties.

Pollution on or from the site or the work.

Watch for
  • Wastewater discharged with no coagulation or settlement step
Controls that matter
  • Effluent treatment with sludge removal and monitored discharge

Cyber and data

Elevated
Batch release depends on electronic test data and lot records, and direct online sales hold sensitive purchase histories.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Direct-to-consumer web store or subscription service
  • Testing machines and batch records on one flat network
Controls that matter
  • Offline backups of quality and batch release records
  • Customer payments taken through a hosted checkout

Professional liability

Low
No advice or service is sold; claims over product failure fall under products liability.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Design and testing services sold to private-label brand owners
Controls that matter
  • Quality agreements setting each party's duties for specification and testing

Umbrella and excess

High
One defective lot reaches very large numbers of users, inviting class actions and serious infection claims beyond primary limits.

How likely one liability event is to exhaust primary limits.

Watch for
  • Public health programs or large retailers taking whole production lots
  • Products carrying added drugs or novelty claims
Controls that matter
  • Lot traceability that confines a recall to defined batches
  • Claims and labeling reviewed before each new product launch
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Usually modern single-story steel-frame plants with long dipping halls, clean packing rooms, latex tank farms and a climate-controlled warehouse, often in industrial parks.
Occupancy
Latex compounding with ammonia and accelerator powders, gas-fired curing ovens on continuous lines, solvent dipping for synthetic products, and foil, carton and lubricant storage.
Protection
Sprinklers throughout, burner safeguards on ovens, cut-off and ventilated solvent rooms, detection in exhaust ducts, backup power for climate control and controlled access to finished goods.
Exposure
Industrial park neighbors share roads and utilities; a long regional power outage threatens climate control and stock even when no fire reaches the plant.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: products and regulation

On site: quality system

On site: plant and continuity

On site: records and history

Refer or decline if you find

  • Batches released without burst and leak testing
  • Expiry dating not supported by stability studies
  • Open regulatory findings on the quality system
  • All output from a single dipping line with no backup
  • Rejected product sold on as seconds
05 / Location

How UrbanStat data helps.

Latex and finished condoms degrade with heat and humidity, so a storm that takes out power and climate control spoils stock without touching the building. Flood contaminates dip tanks and clean packing rooms.

FloodHurricaneWind
  • Flood scores at the address show whether dip tanks, clean packing rooms and climate-controlled stores at ground level are exposed to contamination by water.
  • Hurricane and wind scores for the site gauge storm exposure for a plant where a long power outage spoils heat-sensitive latex and finished stock.
  • Parcel and permit data give construction date, building value and permit history, a cross-check on the declared building value of a custom-built dipping plant.
Flood · Hurricane · Wind
06 / Public loss data

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

2.4 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

All other rubber product manufacturing
2.4
All private industry
2.3

0.9 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: All other rubber product manufacturing (NAICS 326299). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

7 fatal work injuries in 2024.

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Rubber Product Manufacturing (NAICS 3262), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

133 citations from 30 inspections; 58% were classed serious, willful or repeat.

  • 1910.119 Process safety management of highly hazardous chemicals
    27
  • 1910.147 The control of hazardous energy (lockout/tagout)
    19
  • 1910.134 Respiratory protection
    10
  • 1910.212 General requirements for all machines
    7
  • 1910.1200 Hazard communication
    7

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: All Other Rubber Product Manufacturing (NAICS 326299). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

97 facilities reported toxic chemical releases totaling 1.7 million pounds on and off site.

  • Zinc compounds
    480,794
  • Toluene
    380,029
  • Xylene
    266,586

Chemicals released in the largest amounts, in pounds. 35 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: All Other Rubber Product Manufacturing (NAICS 326299). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Product recall
A failed lot must be traced and pulled from pharmacies, clinics and online sellers across several markets.
Equipment breakdown
Dipping line drives, ovens and electronic testers fail without a fire and stop registered production.
Contingent business interruption
Latex concentrate and foil laminate come from few sources, and losing one supplier halts the lines.
Stock throughput
Heat-sensitive finished goods spend weeks in containers, ports and distributors' warehouses before sale.
Classification
SystemCodeIndustry
NAICS 2022, primary326299All Other Rubber Product Manufacturing
SIC 1987, primary3069Fabricated Rubber Products, NEC
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →